Detailed Burnup Calculations for Testing Nuclear Data
- Centro Atomico Bariloche (CNEA), 8400 S.C.de Bariloche (Argentina)
A general method (MCQ) has been developed by introducing a microscopic burnup scheme that uses the Monte Carlo calculated fluxes and microscopic reaction rates of a complex system and a depletion code for burnup calculations as a basis for solving nuclide material balance equations for each spatial region in which the system is divided. Continuous energy-dependent cross-section libraries and full 3D geometry of the system can be input for the calculations. The resulting predictions for the system at successive burnup time steps are thus based on a calculation route where both geometry and cross sections are accurately represented, without geometry simplifications and with continuous energy data, providing an independent approach for benchmarking other methods and nuclear data of actinides, fission products, and other burnable absorbers. The main advantage of this method over the classical deterministic methods currently used is that the MCQ System is a direct 3D method without the limitations and errors introduced on the homogenization of geometry and condensation of energy of deterministic methods. The Monte Carlo and burnup codes adopted until now are the widely used MCNP and ORIGEN codes, but other codes can be used also. For using this method, there is need of a well-known set of nuclear data for isotopes involved in burnup chains, including burnable poisons, fission products, and actinides. For fixing the data to be included in this set, a study of the present status of nuclear data is performed, as part of the development of the MCQ method. This study begins with a review of the available cross-section data of isotopes involved in burnup chains for power and research nuclear reactors. The main data needs for burnup calculations are neutron cross sections, decay constants, branching ratios, fission energy, and yields. The present work includes results of selected experimental benchmarks and conclusions about the sensitivity of different sets of cross-section data for burnup calculations, using some of the main available evaluated nuclear data files (ENDF-B-VI-Rel.8, JEFF-3.0, JENDL-3.3), on an isotope-by-isotope basis as much as possible. The selected experimental burnup benchmarks are reference cases for LWR and HWR reactors, with analysis of isotopic composition as a function of burnup. For LWR (H2O-moderated uranium oxide lattices) four benchmarks are included: ATM-104 NEA Burnup credit criticality benchmark; Yankee-Rowe Core V; H.B.Robinson Unit 2 and Turkey Point Unit 3. For HWR (D2O-moderated uranium oxide cluster lattices), three benchmarks were selected: NPD-19-rod Fuel Clusters; Pickering-28-rod Fuel Clusters; and Bruce-37-rod Fuel Clusters. The isotopes with experimental concentration data included in these benchmarks are: Se-79, Sr90, Tc99, Ru106, Sn126, Sb125,1129, Cs133-137, Nd143, 145, Sm149-150, 152, Eul53-155, U234-235, 238, Np237, Pu238-242, Am241-243, and Cm242-248. Results and analysis of differences between calculated and measured absolute and/or relative concentrations of these isotopes for the seven benchmarks are included in this work.
- OSTI ID:
- 20722605
- Journal Information:
- AIP Conference Proceedings, Vol. 769, Issue 1; Conference: International conference on nuclear data for science and technology, Santa Fe, NM (United States), 26 Sep - 1 Oct 2004; Other Information: DOI: 10.1063/1.1945055; (c) 2005 American Institute of Physics; Country of input: International Atomic Energy Agency (IAEA); ISSN 0094-243X
- Country of Publication:
- United States
- Language:
- English
Similar Records
SCALE Validation Experience Using an Expanded Isotopic Assay Database for Spent Nuclear Fuel
Nuclear data uncertainty quantification for the nuclide inventory of a Calvert Cliffs spent fuel sample
Related Subjects
ACTINIDES
AMERICIUM 241
ANTIMONY 125
BENCHMARKS
BRANCHING RATIO
BURNABLE POISONS
BURNUP
CESIUM 133
CURIUM 242
ENERGY DEPENDENCE
FISSION
FISSION PRODUCTS
FUEL RODS
GEOMETRY
ISOTOPE RATIO
MONTE CARLO METHOD
NEODYMIUM 143
NEPTUNIUM 237
NEUTRONS
NUCLEAR DATA COLLECTIONS
NUCLEAR FUELS
NUCLEAR REACTION KINETICS
NUCLEAR REACTION YIELD
PLUTONIUM 238
RUTHENIUM 106
SAMARIUM 149
SELENIUM 79
STRONTIUM 90
TECHNETIUM 99
TIN 126
URANIUM 234
URANIUM OXIDES