Creep deformation behavior of Sn-3.5Ag solder/Cu couple at small length scales
In order to adequately characterize the behavior of solder balls in electronic devices, the mechanical behavior of solder joints needs to be studied at small length scales. The creep behavior of single solder ball Sn-Ag/Cu solder joints was studied in shear, at 25, 60, 95, and 130 deg. C, using a microforce testing system. A change in the creep stress exponent with increasing stress was observed and explained in terms of a threshold stress for bypass of Ag{sub 3}Sn particles by dislocations. The stress exponent was also temperature dependent, exhibiting an increase in exponent of two from lower to higher temperature. The activation energy for creep was found to be temperature dependant, correlating with self-diffusion of pure Sn at high temperatures, and dislocation core diffusion of pure Sn at lower temperatures. Normalizing the creep rate for activation energy and the temperature-dependence of shear modulus allowed for unification of the creep data. Microstructure characterization, including preliminary TEM analysis, and fractographic analysis were conducted in order to fully describe the creep behavior of the material.
- OSTI ID:
- 20634764
- Journal Information:
- Acta Materialia, Vol. 52, Issue 15; Other Information: DOI: 10.1016/j.actamat.2004.06.010; PII: S1359645404003489; Copyright (c) 2004 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved; Country of input: International Atomic Energy Agency (IAEA); ISSN 1359-6454
- Country of Publication:
- United States
- Language:
- English
Similar Records
Superplastic creep of low melting point solder joints
Creep deformation behavior in eutectic Sn-Ag solder joints using a novel mapping technique