Monitoring pavement response and performance using in-situ instrumentation
The purpose of this paper is to present the effectiveness of in-situ instrumentation on diagnosing the pavement layer conditions under full-scale accelerated traffic loading. The test section is an in-service pavement (US281) in Jacksboro, Texas. Multi-Depth Deflectometers (MDDs) are used to measure both permanent deformations and transient deflections, caused by accelerated traffic loading and Falling Weight Deflectometers (MDDs) are used to measure both permanent deformations and transient deflections, caused by accelerated traffic loading and Falling Weight Deflectometer (FWD) tests. Four different FWD loads of 25, 40, 52, and 67 kN were applied in close proximity to the MDDs at various traffic loading intervals to determine pavement conditions. It was found that the majority of rutting occurred in the newly recycled asphalt mix. The aged ({gt}40 years) underlying base and subgrade layers contributed less than 30% to overall rutting. Only the top recycled Asphalt layer underwent notable deterioration due to traffic loading. Up to 1.5 million axle repetitions, the test pad responded to FWD load almost linearly, not only over the whole pavement system but also within individual layers. However, under higher FWD loads, the percentage of total deflection contributed by the subgrade increased.
- Research Organization:
- Texas Dept. of Transportation, Austin, TX (US)
- OSTI ID:
- 20005856
- Resource Relation:
- Conference: Field Instrumentation for Soil and Rock, Atlanta, GA (US), 06/18/1998--06/19/1998; Other Information: PBD: 1999; Related Information: In: Field instrumentation for soil and rock. ASTM special technical publication 1358, by Durham, G.N.; Marr, W.A. [eds.], 426 pages.
- Country of Publication:
- United States
- Language:
- English
Similar Records
Early-life study of the FA409 full-depth asphalt-concrete pavement sections
Structural response of LVR flexible pavements at Mn/ROAD project