skip to main content

Title: PHITS-2.76, Particle and Heavy Ion Transport code System

Version 03 PHITS can deal with the transport of almost all particles (nucleons, nuclei, mesons, photons, and electrons) over wide energy ranges, using several nuclear reaction models and nuclear data libraries. Geometrical configuration of the simulation can be set with GG (General Geometry) or CG (Combinatorial Geometry). Various quantities such as heat deposition, track length and production yields can be deduced from the simulation, using implemented estimator functions called "tally". The code also has a function to draw 2D and 3D figures of the calculated results as well as the setup geometries, using a code ANGEL. The physical processes included in PHITS can be divided into two categories, transport process and collision process. In the transport process, PHITS can simulate motion of particles under external fields such as magnetic and gravity. Without the external fields, neutral particles move along a straight trajectory with constant energy up to the next collision point. However, charge particles interact many times with electrons in the material losing energy and changing direction. PHITS treats ionization processes not as collision but as a transport process, using the continuous-slowing-down approximation. The average stopping power is given by the charge density of the material and the momentum ofmore » the particle taking into account the fluctuations of the energy loss and the angular deviation. In the collision process, PHITS can simulate the elastic and inelastic interactions as well as decay of particles. The total reaction cross section, or the life time of the particle is an essential quantity in the determination of the mean free path of the transport particle. According to the mean free path, PHITS chooses the next collision point using the Monte Carlo method. To generate the secondary particles of the collision, we need the information of the final states of the collision. For neutron induced reactions in low energy region, PHITS employs the cross sections from evaluated nuclear data libraries JENDL-4.0 (Shibata et al 2011). For high energy neutrons and other particles, we have incorporated several models such as JAM (Nara et al 1999), INCL (Cugnon et al 2011), INCL-ELF (Sawada et al 2012) and JQMD (Niita et al 1995) to simulate nuclear reactions up to 100 GeV/u. The special features of PHITS are the event generator mode (Iwamoto et al 2007) and the microdosimetric function (Sato et al 2009). Owing to the event generator mode, PHITS can determine the profiles of all secondary particles generated from a single nuclear interaction even using nuclear data libraries, taking the momentum and energy conservations into account. The microdosimetric function gives the probability densities of deposition energy in microscopic sites such as lineal energy y and specific energy z, using the mathematical model developed based on the results of the track structure simulation. These features are very important for various purposes such as the estimations of soft-error rates of semi-conductor devices induced by neutrons, and relative biological effectiveness of charged particles. From version 2.64, Prompt gamma spectrum and isomer production rates can be precisely estimated, owing to the implementation of EBITEM (ENSDF-Based Isomeric Transition and isomEr production Model). The photo-nuclear reaction model was improved up to 140 MeV. From version 2.76, electron and photon transport algorithm based on EGS5 (Hirayama et al. 2005) was incorporated. Models for describing photo-nuclear reaction above 140 MeV and muon-nuclear reaction were implemented. Event-generator mode version 2 was developed. Relativistic theory can be considered in the JQMD model.« less
Publication Date:
OSTI Identifier:
Report Number(s):
PHITS-2.76; 004591MLTPL00
DOE Contract Number:
Resource Type:
Software Revision:
Software Package Number:
Software CPU:
Source Code Available:
Other Software Info:
Owner Installation: Research Organization for Information Science and Technology Contributors: Research Organization for Information Science and Technology, Tokai, Ibaraki, Japan, Japan Atomic Energy Agency, Tokai, Ibaraki, Japan, High Energy Accelerator Research Organization (KEK), Tsukuba, Ibaraki, Japan, Tokyo Institute of Technology, Tokyo, Japan, and Chalmers University of Technology, Gothenburg, Sweden through the OECD NEA Data Bank, Issy-les-Moulineaux, France. The Monte Carlo method is used. KEYWORDS: MONTE CARLO, HEAVY IONS, NUCLEAR STRUCTURE DATA, NUCLIDE TRANSPORT
Research Org:
Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
Sponsoring Org:
Contributing Orgs:
Not Specified
Country of Publication:
United States

To initiate an order for this software, request consultation services, or receive further information, fill out the request form below. You may also reach us by email at: .

OSTI staff will begin to process an order for scientific and technical software once the payment and signed site license agreement are received. If the forms are not in order, OSTI will contact you. No further action will be taken until all required information and/or payment is received. Orders are usually processed within three to five business days.

Software Request