skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Multi-Column Experimental Test Bed Using CaSDB MOF for Xe/Kr Separation

Abstract

Processing of spent nuclear fuel produces off-gas from which several volatile radioactive components must be separated for further treatment or storage. As part of the Off-gas Sigma Team, parallel research at INL and PNNL has produced several promising sorbents for the selective capture of xenon and krypton from these off-gas streams. In order to design full-scale treatment systems, sorbents that are promising on a laboratory scale must be proven under process conditions to be considered for pilot and then full-scale use. To that end, a bench-scale multi-column system with capability to test multiple sorbents was designed and constructed at INL. This report details bench-scale testing of CaSDB MOF, produced at PNNL, and compares the results to those reported last year using INL engineered sorbents. Two multi-column tests were performed with the CaSDB MOF installed in the first column, followed with HZ-PAN installed in the second column. The CaSDB MOF column was placed in a Stirling cryocooler while the cryostat was employed for the HZ-PAN column. Test temperatures of 253 K and 191 K were selected for the first column while the second column was held at 191 K for both tests. Calibrated volume sample bombs were utilized for gas streammore » analyses. At the conclusion of each test, samples were collected from each column and analyzed for gas composition. While CaSDB MOF does appear to have good capacity for Xe, the short time to initial breakthrough would make design of a continuous adsorption/desorption cycle difficult, requiring either very large columns or a large number of smaller columns. Because of the tenacity with which Xe and Kr adhere to the material once adsorbed, this CaSDB MOF may be more suitable for use as a long-term storage solution. Further testing is recommended to determine if CaSDB MOF is suitable for this purpose.« less

Authors:
 [1];  [1];  [1]
  1. Idaho National Lab. (INL), Idaho Falls, ID (United States)
Publication Date:
Research Org.:
Idaho National Lab. (INL), Idaho Falls, ID (United States)
Sponsoring Org.:
USDOE Office of Nuclear Energy (NE)
OSTI Identifier:
1260463
Report Number(s):
INL/EXT-16-37978
DOE Contract Number:  
AC07-05ID14517
Resource Type:
Technical Report
Country of Publication:
United States
Language:
English
Subject:
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS; AgZ-PAN; HZ-PAN; krypton; MOF; off-gas capture; xenon

Citation Formats

Welty, Amy Keil, Greenhalgh, Mitchell Randy, and Garn, Troy Gerry. Multi-Column Experimental Test Bed Using CaSDB MOF for Xe/Kr Separation. United States: N. p., 2016. Web. doi:10.2172/1260463.
Welty, Amy Keil, Greenhalgh, Mitchell Randy, & Garn, Troy Gerry. Multi-Column Experimental Test Bed Using CaSDB MOF for Xe/Kr Separation. United States. https://doi.org/10.2172/1260463
Welty, Amy Keil, Greenhalgh, Mitchell Randy, and Garn, Troy Gerry. 2016. "Multi-Column Experimental Test Bed Using CaSDB MOF for Xe/Kr Separation". United States. https://doi.org/10.2172/1260463. https://www.osti.gov/servlets/purl/1260463.
@article{osti_1260463,
title = {Multi-Column Experimental Test Bed Using CaSDB MOF for Xe/Kr Separation},
author = {Welty, Amy Keil and Greenhalgh, Mitchell Randy and Garn, Troy Gerry},
abstractNote = {Processing of spent nuclear fuel produces off-gas from which several volatile radioactive components must be separated for further treatment or storage. As part of the Off-gas Sigma Team, parallel research at INL and PNNL has produced several promising sorbents for the selective capture of xenon and krypton from these off-gas streams. In order to design full-scale treatment systems, sorbents that are promising on a laboratory scale must be proven under process conditions to be considered for pilot and then full-scale use. To that end, a bench-scale multi-column system with capability to test multiple sorbents was designed and constructed at INL. This report details bench-scale testing of CaSDB MOF, produced at PNNL, and compares the results to those reported last year using INL engineered sorbents. Two multi-column tests were performed with the CaSDB MOF installed in the first column, followed with HZ-PAN installed in the second column. The CaSDB MOF column was placed in a Stirling cryocooler while the cryostat was employed for the HZ-PAN column. Test temperatures of 253 K and 191 K were selected for the first column while the second column was held at 191 K for both tests. Calibrated volume sample bombs were utilized for gas stream analyses. At the conclusion of each test, samples were collected from each column and analyzed for gas composition. While CaSDB MOF does appear to have good capacity for Xe, the short time to initial breakthrough would make design of a continuous adsorption/desorption cycle difficult, requiring either very large columns or a large number of smaller columns. Because of the tenacity with which Xe and Kr adhere to the material once adsorbed, this CaSDB MOF may be more suitable for use as a long-term storage solution. Further testing is recommended to determine if CaSDB MOF is suitable for this purpose.},
doi = {10.2172/1260463},
url = {https://www.osti.gov/biblio/1260463}, journal = {},
number = ,
volume = ,
place = {United States},
year = {Tue Mar 01 00:00:00 EST 2016},
month = {Tue Mar 01 00:00:00 EST 2016}
}