Second-surface silvered glass solar mirrors of very high reflectance
This paper reports methods developed to maximize the overall reflectance second-surface silvered glass. The reflectance at shorter wavelengths is increased with the aid of a dielectric enhancing layer between the silver and the glass, while at longer wavelengths it is enhanced by use of glass with negligible iron content. The calculated enhancement of reflectance, compared to unenhanced silver on standard low-iron float glass, corresponds to a 4.4% increase in reflectance averaged across the full solar spectrum, appropriate for CSP, and 2.7% for CPV systems using triple junction cells. An experimental reflector incorporating these improvements, of drawn crown glass and a silvered second-surface with dielectric boost, was measured at NREL to have 95.4% solar weighted reflectance. For comparison, non-enhanced, wetsilvered reflectors of the same 4 mm thickness show reflectance ranging from 91.6 - 94.6%, depending on iron content. A potential drawback of using iron-free drawn glass is reduced concentration in high concentration systems because of the inherent surface errors. This effect is largely mitigated for glass shaped by slumping into a concave mold, rather than by bending.
- Research Organization:
- National Renewable Energy Lab. (NREL), Golden, CO (United States)
- Sponsoring Organization:
- USDOE
- DOE Contract Number:
- AC36-08GO28308
- OSTI ID:
- 1258555
- Report Number(s):
- NREL/CP-5500-53356
- Journal Information:
- Proceedings of SPIE - The International Society for Optical Engineering, Vol. 8108; ISSN 0277-786X
- Publisher:
- SPIE
- Country of Publication:
- United States
- Language:
- English
Similar Records
Optical studies of second surface mirrors proposed for use in solar heliostats
An assessment of second-generation stretched-membrane mirror modules