skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: A Multicomponent Blend as a Diesel Fuel Surrogate for Compression Ignition Engine Applications

Journal Article · · Journal of Engineering for Gas Turbines and Power
DOI:https://doi.org/10.1115/1.4030416· OSTI ID:1249123
 [1];  [2];  [1];  [3];  [2];  [1]
  1. Argonne National Lab. (ANL), Argonne, IL (United States)
  2. Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)
  3. Univ. of Connecticut, Storrs, CT (United States)

A mixture of n-dodecane and m-xylene is investigated as a diesel fuel surrogate for compression ignition engine applications. Compared to neat n-dodecane, this binary mixture is more representative of diesel fuel because it contains an alkyl-benzene which represents an important chemical class present in diesel fuels. A detailed multi-component mechanism for n-dodecane and m-xylene was developed by combining a previously developed n-dodecane mechanism with a recently developed mechanism for xylenes. The xylene mechanism is shown to reproduce experimental ignition data from a rapid compression machine and shock tube, speciation data from the jet stirred reactor and flame speed data. This combined mechanism was validated by comparing predictions from the model with experimental data for ignition in shock tubes and for reactivity in a flow reactor. The combined mechanism, consisting of 2885 species and 11754 reactions, was reduced to a skeletal mechanism consisting 163 species and 887 reactions for 3D diesel engine simulations. The mechanism reduction was performed using directed relation graph (DRG) with expert knowledge (DRG-X) and DRG-aided sensitivity analysis (DRGASA) at a fixed fuel composition of 77% of n-dodecane and 23% m-xylene by volume. The sample space for the reduction covered pressure of 1 – 80 bar, equivalence ratio of 0.5 – 2.0, and initial temperature of 700 – 1600 K for ignition. The skeletal mechanism was compared with the detailed mechanism for ignition and flow reactor predictions. Finally, the skeletal mechanism was validated against a spray flame dataset under diesel engine conditions documented on the Engine Combustion Network (ECN) website. These multidimensional simulations were performed using a Representative Interactive Flame (RIF) turbulent combustion model. In conclusion, encouraging results were obtained compared to the experiments with regards to the predictions of ignition delay and lift-off length at different ambient temperatures.

Research Organization:
Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)
Sponsoring Organization:
USDOE
Grant/Contract Number:
AC52-07NA27344
OSTI ID:
1249123
Report Number(s):
LLNL-CONF-652521
Journal Information:
Journal of Engineering for Gas Turbines and Power, Vol. 137, Issue 11; Conference: ASME 2014 Internal Combustion Engine Division Fall Technical Conference, Columbus, IN (United States), 19-22 Oct 2014; ISSN 0742-4795
Publisher:
ASMECopyright Statement
Country of Publication:
United States
Language:
English
Citation Metrics:
Cited by: 69 works
Citation information provided by
Web of Science

Similar Records

A Multicomponent Blend as a Diesel Fuel Surrogate for Compression Ignition Engine Applications
Journal Article · Tue May 12 00:00:00 EDT 2015 · Journal of Engineering for Gas Turbines and Power · OSTI ID:1249123

A compact skeletal mechanism for n -dodecane with optimized semi-global low-temperature chemistry for diesel engine simulations
Journal Article · Wed Mar 01 00:00:00 EST 2017 · Fuel · OSTI ID:1249123

Multidimensional Numerical Simulations of Knocking Combustion in a Cooperative Fuel Research Engine
Journal Article · Tue May 15 00:00:00 EDT 2018 · Journal of Energy Resources Technology · OSTI ID:1249123