New opportunities for quantitative tracking of polycrystal responses in three dimensions

Schuren, Jay C.; Shade, Paul A.; Bernier, Joel V.; Li, Shiu Fai; Blank, Basil; Lind, Jonathan F.; Kenesei, Peter; Lienert, Ulrich; Suter, Robert; Turner, Todd J.; Dimiduk, D. M.; Almer, Jonathan

doi:10.1016/j.cossms.2014.11.003

Title: New opportunities for quantitative tracking of polycrystal responses in three dimensions

Journal Article · Thu Jan 01 00:00:00 EST 2015 · Current Opinion in Solid State and Materials Science

DOI:https://doi.org/10.1016/j.cossms.2014.11.003· OSTI ID:1242277

Schuren, Jay C.; Shade, Paul A.; Bernier, Joel V.; Li, Shiu Fai; Blank, Basil; Lind, Jonathan F.; Kenesei, Peter; Lienert, Ulrich; Suter, Robert; Turner, Todd J.; Dimiduk, D. M.; Almer, Jonathan

Cite

Export

Save

Research Organization:: Argonne National Laboratory (ANL), Argonne, IL (United States)

Sponsoring Organization:: USDOE Office of Science (SC), Basic Energy Sciences (BES); Air Force Research Laboratory - Materials and Manufacturing Directorate

DOE Contract Number:: AC02-06CH11357

OSTI ID:: 1242277

Journal Information:: Current Opinion in Solid State and Materials Science, Vol. 19, Issue 4; ISSN 1359-0286

Publisher:: Elsevier

Country of Publication:: United States

Language:: English

References (39)

High-energy Needs and Capabilities to Study Multiscale Phenomena in Crystalline Materials Miller, Matthew P.; Suter, Robert M.; Lienert, Ulrich Synchrotron Radiation News, Vol. 25, Issue 6 https://doi.org/10.1080/08940886.2012.736834	journal	November 2012
On the interpretation of X-ray, single crystal, rotation photographs Bernal, J. D. Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character, Vol. 113, Issue 763, p. 117-160 https://doi.org/10.1098/rspa.1926.0143	journal	November 1926
Tracking: a method for structural characterization of grains in powders or polycrystals Lauridsen, E. M.; Schmidt, S.; Suter, R. M. Journal of Applied Crystallography, Vol. 34, Issue 6 https://doi.org/10.1107/S0021889801014170	journal	November 2001
High-energy diffraction microscopy at the advanced photon source Lienert, U.; Li, S. F.; Hefferan, C. M. JOM, Vol. 63, Issue 7 https://doi.org/10.1007/s11837-011-0116-0	journal	July 2011
An introduction to three-dimensional X-ray diffraction microscopy Poulsen, Henning Friis Journal of Applied Crystallography, Vol. 45, Issue 6, p. 1084-1097 https://doi.org/10.1107/S0021889812039143	journal	October 2012
Three-dimensional X-ray structural microscopy with submicrometre resolution Larson, B. C.; Yang, Wenge; Ice, G. E. Nature, Vol. 415, p. 887-890 https://doi.org/10.1038/415887a	journal	February 2002
Strain tensor development in a single grain in the bulk of a polycrystal under loading Margulies, L.; Lorentzen, T.; Poulsen, H. F. Acta Materialia, Vol. 50, Issue 7 https://doi.org/10.1016/S1359-6454(02)00028-9	journal	April 2002
Far-field high-energy diffraction microscopy: a tool for intergranular orientation and strain analysis Bernier, J. V.; Barton, N. R.; Lienert, U. The Journal of Strain Analysis for Engineering Design, Vol. 46, Issue 7 https://doi.org/10.1177/0309324711405761	journal	July 2011
Forward modeling method for microstructure reconstruction using x-ray diffraction microscopy: Single-crystal verification Suter, R. M.; Hennessy, D.; Xiao, C. Review of Scientific Instruments, Vol. 77, Issue 12 https://doi.org/10.1063/1.2400017	journal	December 2006
Adaptive reconstruction method for three-dimensional orientation imaging Li, S. F.; Suter, R. M. Journal of Applied Crystallography, Vol. 46, Issue 2 https://doi.org/10.1107/S0021889813005268	journal	March 2013
Fatigue and Damage in Structural Materials Studied by X-Ray Tomography Withers, Philip J.; Preuss, Michael Annual Review of Materials Research, Vol. 42, Issue 1 https://doi.org/10.1146/annurev-matsci-070511-155111	journal	August 2012
Quantifying the uncertainty of synchrotron-based lattice strain measurements Schuren, J. C.; Miller, M. P. The Journal of Strain Analysis for Engineering Design, Vol. 46, Issue 7 https://doi.org/10.1177/0309324711411553	journal	August 2011
Integrating experiments and simulations to estimate uncertainty in lattice strain measurements Schuren, Jay C.; Wong, Su L.; Dawson, Paul R. The Journal of Strain Analysis for Engineering Design, Vol. 49, Issue 1 https://doi.org/10.1177/0309324713492325	journal	August 2013
Single-Crystal Elastic Moduli and the hcp → bcc Transformation in Ti, Zr, and Hf Fisher, E. S.; Renken, C. J. Physical Review, Vol. 135, Issue 2A https://doi.org/10.1103/PhysRev.135.A482	journal	July 1964
Room temperature creep of Ti-6AI-4V Imam, M. A.; Gilmore, C. M. Metallurgical Transactions A, Vol. 10, Issue 4 https://doi.org/10.1007/BF02697068	journal	April 1979
A review of dwell sensitive fatigue in titanium alloys: the role of microstructure, texture and operating conditions Bache, M. International Journal of Fatigue, Vol. 25, Issue 9-11 https://doi.org/10.1016/S0142-1123(03)00145-2	journal	September 2003
The Influence of Slip Character on the Creep and Fatigue Fracture of an α Ti-Al Alloy Brandes, M. C.; Mills, M. J.; Williams, J. C. Metallurgical and Materials Transactions A, Vol. 41, Issue 13 https://doi.org/10.1007/s11661-010-0407-z	journal	October 2010
Observations of Facet Formation in Near-α Titanium and Comments on the Role of Hydrogen Pilchak, A. L.; Williams, J. C. Metallurgical and Materials Transactions A, Vol. 42, Issue 4 https://doi.org/10.1007/s11661-010-0507-9	journal	October 2010
Orientation mapping Frank, F. C. Metallurgical Transactions A, Vol. 19, Issue 3 https://doi.org/10.1007/BF02649253	journal	March 1988
Distances for the solutions of stress tensor inversion in relation to misfit angles that accompany the solutions Yamaji, A.; Sato, K. Geophysical Journal International, Vol. 167, Issue 2 https://doi.org/10.1111/j.1365-246X.2006.03188.x	journal	November 2006
Analyzing the orientation dependence of stresses in polycrystals using vertices of the single crystal yield surface and crystallographic fibers of orientation space Ritz, Hadas; Dawson, Paul; Marin, Tito Journal of the Mechanics and Physics of Solids, Vol. 58, Issue 1 https://doi.org/10.1016/j.jmps.2009.08.007	journal	January 2010
The influence of microstructure on surface strain distributions in a nickel micro-tension specimen Turner, T. J.; Shade, P. A.; Schuren, J. C. Modelling and Simulation in Materials Science and Engineering, Vol. 21, Issue 1 https://doi.org/10.1088/0965-0393/21/1/015002	journal	November 2012
A direct method for the determination of the mean orientation-dependent elastic strains and stresses in polycrystalline materials from strain pole figures Bernier, Joel V.; Miller, Matthew P. Journal of Applied Crystallography, Vol. 39, Issue 3 https://doi.org/10.1107/S0021889806009873	journal	May 2006
Measuring Stress Distributions in Ti-6Al-4V Using Synchrotron X-Ray Diffraction Bernier, J. V.; Park, J. -S.; Pilchak, A. L. Metallurgical and Materials Transactions A, Vol. 39, Issue 13 https://doi.org/10.1007/s11661-008-9639-6	journal	October 2008
Overview No. 1 Goods, S. H.; Brown, L. M. Acta Metallurgica, Vol. 27, Issue 1 https://doi.org/10.1016/0001-6160(79)90051-8	journal	January 1979
On the ductile enlargement of voids in triaxial stress fields∗ Rice, J. R.; Tracey, D. M. Journal of the Mechanics and Physics of Solids, Vol. 17, Issue 3 https://doi.org/10.1016/0022-5096(69)90033-7	journal	June 1969
Lattice Misorientations in Titanium Alloys Modeling the Origins of Defects Barton, Nathan R.; Dawson, Paul R.; Salwan, Sk International Journal of Forming Processes, Vol. 5, Issue 2-3-4 https://doi.org/10.3166/ijfp.5.189-201	journal	December 2002
A Criterion for Ductile Fracture by the Growth of Holes McClintock, F. A. Journal of Applied Mechanics, Vol. 35, Issue 2 https://doi.org/10.1115/1.3601204	journal	June 1968
Analysis of the cup-cone fracture in a round tensile bar Tvergaard, V.; Needleman, A. Acta Metallurgica, Vol. 32, Issue 1 https://doi.org/10.1016/0001-6160(84)90213-X	journal	January 1984
The effect of stress triaxiality and strain-rate on the fracture characteristics of ductile metals Mirza, M. S.; Barton, D. C.; Church, P. Journal of Materials Science, Vol. 31, Issue 2 https://doi.org/10.1007/BF01139164	journal	January 1996
On the calibration of high-energy X-ray diffraction setups. I. Assessing tilt and spatial distortion of the area detector Borbely, Andras; Renversade, Loic; Kenesei, Peter Journal of Applied Crystallography, Vol. 47, Issue 3 https://doi.org/10.1107/S160057671400898X	journal	May 2014
Precision of lattice strain and orientation measurements using high-energy monochromatic X-ray diffraction Edmiston, John K.; Barton, Nathan R.; Bernier, Joel V. Journal of Applied Crystallography, Vol. 44, Issue 2 https://doi.org/10.1107/S0021889811002123	journal	February 2011
Porosity analysis of long-fiber-reinforced ceramic matrix composites using X-ray tomography Moralesrodriguez, A.; Reynaud, P.; Fantozzi, G. Scripta Materialia, Vol. 60, Issue 6 https://doi.org/10.1016/j.scriptamat.2008.11.018	journal	March 2009
Real-time quantitative imaging of failure events in materials under load at temperatures above 1,600 °C Bale, Hrishikesh A.; Haboub, Abdel; MacDowell, Alastair A. Nature Materials, Vol. 12, Issue 1 https://doi.org/10.1038/nmat3497	journal	December 2012
In situ characterization of Grade 92 steel during tensile deformation using concurrent high energy X-ray diffraction and small angle X-ray scattering Wang, Leyun; Li, Meimei; Almer, Jonathan Journal of Nuclear Materials, Vol. 440, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2013.04.063	journal	September 2013
Formation and Subdivision of Deformation Structures During Plastic Deformation Jakobsen, B. Science, Vol. 312, Issue 5775 https://doi.org/10.1126/science.1124141	journal	May 2006
In Situ Observation of the Dislocation Structure Evolution During a Strain Path Change in Copper Wejdemann, Christian; Poulsen, Henning Friis; Lienert, Ulrich JOM, Vol. 65, Issue 1 https://doi.org/10.1007/s11837-012-0504-0	journal	November 2012
In situ Synchrotron Study of Phase Transformation Behaviors in Bulk Metallic Glass by Simultaneous Diffraction and Small Angle Scattering Wang, X. -L.; Almer, J.; Liu, C. T. Physical Review Letters, Vol. 91, Issue 26 https://doi.org/10.1103/PhysRevLett.91.265501	journal	December 2003
Micromechanical response of mineral and collagen phases in bone Almer, J. D.; Stock, S. R. Journal of Structural Biology, Vol. 157, Issue 2 https://doi.org/10.1016/j.jsb.2006.09.001	journal	February 2007

Cited By (20)

Fatigue-resistant high-performance elastocaloric materials made by additive manufacturing Hou, Huilong; Simsek, Emrah; Ma, Tao Science, Vol. 366, Issue 6469 https://doi.org/10.1126/science.aax7616	journal	November 2019
InSitμ@CHESS, a Resource for Studying Structural Materials Miller, Matthew P.; Obstalecki, Mark; Fontes, Ernest Synchrotron Radiation News, Vol. 30, Issue 3 https://doi.org/10.1080/08940886.2017.1316124	journal	May 2017
Benchmarking Crystal Plasticity Models with Microtensile Evaluation and 3D Characterization of René 88DT Alam, Z.; Eastman, D.; Hemker, K. Superalloys 2016, Proceedings of the 13th International Symposium on Superalloys https://doi.org/10.7449/superalloys/2016/superalloys_2016_813_820	conference	January 2016
Intragranular three-dimensional stress tensor fields in plastically deformed polycrystals Hayashi, Yujiro; Setoyama, Daigo; Hirose, Yoshiharu Science, Vol. 366, Issue 6472 https://doi.org/10.1126/science.aax9167	journal	December 2019
Incipient Bulk Polycrystal Plasticity Observed by Synchrotron In-Situ Topotomography Proudhon, Henry; Guéninchault, Nicolas; Forest, Samuel Materials, Vol. 11, Issue 10 https://doi.org/10.3390/ma11102018	journal	October 2018
Two-Level Elastoviscoplastic Model: An Application to the Analysis of Grain Structure Evolution under Static Recrystallization Trusov, P. V.; Kondratyev, N. S. Physical Mesomechanics, Vol. 22, Issue 3 https://doi.org/10.1134/s1029959919030081	journal	May 2019
A rotational and axial motion system load frame insert for in situ high energy x-ray studies Shade, Paul A.; Blank, Basil; Schuren, Jay C. Figshare https://doi.org/10.1184/r1/6506321	text	January 2018
Combined near- and far-field high-energy diffraction microscopy dataset for Ti-7Al tensile specimen elastically loaded in situ Turner, Todd J.; Shade, Paul A.; Bernier, Joel V. Integrating Materials and Manufacturing Innovation, Vol. 5, Issue 1 https://doi.org/10.1186/s40192-016-0048-1	journal	March 2016
ICME Approach to Determining Critical Pore Size of IN718 Produced by Selective Laser Melting Sangid, Michael D.; Ravi, Priya; Prithivirajan, Veerappan JOM, Vol. 72, Issue 1 https://doi.org/10.1007/s11837-019-03910-0	journal	November 2019
In-Situ Grain Resolved Stress Characterization During Damage Initiation in Cu-10%W Alloy Pokharel, Reeju; Lebensohn, Ricardo A.; Pagan, Darren C. JOM, Vol. 72, Issue 1 https://doi.org/10.1007/s11837-019-03692-5	journal	July 2019
Development of a Versatile Mechanical Testing Device for In Situ Synchrotron Tomography and Diffraction Experiments Pelerin, Maxime; King, Andrew; Laiarinandrasana, Lucien Integrating Materials and Manufacturing Innovation, Vol. 8, Issue 3 https://doi.org/10.1007/s40192-019-00143-6	journal	June 2019
Measuring stress-induced martensite microstructures using far-field high-energy diffraction microscopy Bucsek, Ashley Nicole; Dale, Darren; Ko, Jun Young Peter Acta Crystallographica Section A Foundations and Advances, Vol. 74, Issue 5 https://doi.org/10.1107/s205327331800880x	journal	August 2018
Shock induced damage in copper: A before and after, three-dimensional study Menasche, David B.; Lind, Jonathan; Li, Shiu Fai Journal of Applied Physics, Vol. 119, Issue 15 https://doi.org/10.1063/1.4947270	journal	April 2016
Incipient Bulk Polycrystal Plasticity Observed by Synchrotron in-situ Topotomography Proudhon, Henry; Gueninchault, Nicolas; Forest, Samuel Preprints.org https://doi.org/10.20944/preprints201809.0179.v1	posted_content	September 2018
Shock induced damage in copper: A before and after, three-dimensional study Menasche, David; Lind, Jonathan; Li, Shiu Fai Deutsches Elektronen-Synchrotron, DESY, Hamburg https://doi.org/10.3204/pubdb-2016-05301	text	January 2016
A rotational and axial motion system load frame insert for in situ high energy x-ray studies Shade, Paul A.; Blank, Basil; Schuren, Jay C. Review of Scientific Instruments, Vol. 86, Issue 9 https://doi.org/10.1063/1.4927855	journal	September 2015
Fatigue-resistant high-performance elastocaloric materials via additive manufacturing Hou, Huilong; Simsek, Emrah; Ma, Tao arXiv https://doi.org/10.48550/arxiv.1908.07900	text	January 2019
Grain-resolved temperature-dependent anisotropy in hexagonal Ti-7Al revealed by synchrotron X-ray diffraction Lim, Rachel E.; Pagan, Darren C.; Boyce, Donald E. Materials Characterization, Vol. 174 https://doi.org/10.1016/j.matchar.2021.110943	journal	April 2021
Quantifying microscale drivers for fatigue failure via coupled synchrotron X-ray characterization and simulations Gustafson, Sven; Ludwig, Wolfgang; Shade, Paul Nature Communications, Vol. 11, Issue 1 https://doi.org/10.1038/s41467-020-16894-2	journal	June 2020
Heterogeneous grain-scale response in ferroic polycrystals under electric field Daniels, John E.; Majkut, Marta; Cao, Qingua Scientific Reports, Vol. 6, Issue 1 https://doi.org/10.1038/srep22820	journal	March 2016

Similar Records

New opportunities for quantitative tracking of polycrystal responses in three dimensions

Journal Article · Tue Dec 09 00:00:00 EST 2014 · Current Opinion in Solid State and Materials Science · OSTI ID:1242277

Schuren, Jay C.; Shade, Paul A.; Bernier, Joel V.; +9 more

Quantitative characterization of soil micro-aggregates: New opportunities from sub-micron resolution synchrotron X-ray microtomography

Journal Article · Mon Jul 10 00:00:00 EDT 2017 · Geoderma · OSTI ID:1242277

Voltolini, Marco; Taş, Neslihan; Wang, Shi; +2 more

DefectTrack: a deep learning-based multi-object tracking algorithm for quantitative defect analysis of in-situ TEM videos in real-time

Journal Article · Tue Sep 20 00:00:00 EDT 2022 · Scientific Reports · OSTI ID:1242277

Sainju, Rajat; Chen, Wei-Ying; Schaefer, Samuel; +4 more

Title: New opportunities for quantitative tracking of polycrystal responses in three dimensions

Citation Formats

References (39)

Cited By (20)

Similar Records

Related Subjects