Self-Replenishing Vascularized Fouling-Release Surfaces

Howell, C; Vu, TL; Lin, JJ; Kolle, S; Juthani, N; Watson, E; Weaver, JC; Alvarenga, J; Aizenberg, J

doi:10.1021/am503150y

Title: Self-Replenishing Vascularized Fouling-Release Surfaces

Journal Article · Wed Aug 13 00:00:00 EDT 2014 · ACS Applied Materials and Interfaces

DOI:https://doi.org/10.1021/am503150y· OSTI ID:1211111

Howell, C; Vu, TL; Lin, JJ; Kolle, S; Juthani, N; Watson, E; Weaver, JC; Alvarenga, J; Aizenberg, J

Inspired by the long-term effectiveness of living antifouling materials, we have developed a method for the self-replenishment of synthetic biofouling-release surfaces. These surfaces are created by either molding or directly embedding 3D vascular systems into polydimethylsiloxane (PDMS) and filling them with a silicone oil to generate a nontoxic oil-infused material. When replenished with silicone oil from an outside source, these materials are capable of self-lubrication and continuous renewal of the interfacial fouling-release layer. Under accelerated lubricant loss conditions, fully infused vascularized samples retained significantly more lubricant than equivalent nonvascularized controls. Tests of lubricant-infused PDMS in static cultures of the infectious bacteria Staphylococcus aureus and Escherichia coli as well as the green microalgae Botryococcus braunii, Chlamydomonas reinhardtii, Dunaliella sauna, and Nannochloropsis oculata showed a significant reduction in biofilm adhesion compared to PDMS and glass controls containing no lubricant. Further experiments on vascularized versus nonvascularized samples that had been subjected to accelerated lubricant evaporation conditions for up to 48 h showed significantly less biofilm adherence on the vascularized surfaces. These results demonstrate the ability of an embedded lubricant-filled vascular network to improve the longevity of fouling-release surfaces.

Cite

Export

Save

Sponsoring Organization:: USDOE Advanced Research Projects Agency - Energy (ARPA-E)

DOE Contract Number:: DE-AR0000326

OSTI ID:: 1211111

Journal Information:: ACS Applied Materials and Interfaces, Vol. 6, Issue 15; ISSN 1944-8244

Country of Publication:: United States

Language:: English

References (37)

Effects of coating roughness and biofouling on ship resistance and powering Schultz, Michael P. Biofouling, Vol. 23, Issue 5 https://doi.org/10.1080/08927010701461974	journal	October 2007
Economic impact of biofouling on a naval surface ship Schultz, M. P.; Bendick, J. A.; Holm, E. R. Biofouling, Vol. 27, Issue 1 https://doi.org/10.1080/08927014.2010.542809	journal	December 2010
Development of suitable photobioreactor for algae production – A review Singh, R. N.; Sharma, Shaishav Renewable and Sustainable Energy Reviews, Vol. 16, Issue 4 https://doi.org/10.1016/j.rser.2012.01.026	journal	May 2012
Fouling of nanofiltration and ultrafiltration membranes applied for wastewater regeneration in the textile industry Van der Bruggen, B.; Cornelis, G.; Vandecasteele, C. Desalination, Vol. 175, Issue 1 https://doi.org/10.1016/j.desal.2004.09.025	journal	May 2005
Biofouling of reverse osmosis membranes used in river water purification for drinking purposes: analysis of microbial populations Chiellini, Carolina; Iannelli, Renato; Modeo, Letizia Biofouling, Vol. 28, Issue 9 https://doi.org/10.1080/08927014.2012.724679	journal	September 2012
Emerging frontiers in detection and control of bacterial biofilms Tan, Seth Yang-En; Chew, Su Chuen; Tan, Sean Yang-Yi Current Opinion in Biotechnology, Vol. 26 https://doi.org/10.1016/j.copbio.2013.08.002	journal	April 2014
Bacterial adhesion on PEG modified polyurethane surfaces Park, Ki Dong; Kim, Young Soo; Han, Dong Keun Biomaterials, Vol. 19, Issue 7-9, p. 851-859 https://doi.org/10.1016/S0142-9612(97)00245-7	journal	April 1998
Amphiphilic triblock copolymers with PEGylated hydrocarbon structures as environmentally friendly marine antifouling and fouling-release coatings Zhou, Zhaoli; Calabrese, David R.; Taylor, Warren Biofouling, Vol. 30, Issue 5 https://doi.org/10.1080/08927014.2014.897335	journal	April 2014
Antimicrobial Sol?Gel Coatings Mahltig, B.; Fiedler, D.; B�ttcher, H. Journal of Sol-Gel Science and Technology, Vol. 32, Issue 1-3 https://doi.org/10.1007/s10971-004-5791-7	journal	December 2004
Bio-Inspired Antifouling Strategies Kirschner, Chelsea M.; Brennan, Anthony B. Annual Review of Materials Research, Vol. 42, Issue 1 https://doi.org/10.1146/annurev-matsci-070511-155012	journal	August 2012
Non-toxic antifouling strategies Magin, Chelsea M.; Cooper, Scott P.; Brennan, Anthony B. Materials Today, Vol. 13, Issue 4 https://doi.org/10.1016/S1369-7021(10)70058-4	journal	April 2010
High throughput combinatorial characterization of thermosetting siloxane–urethane coatings having spontaneously formed microtopographical surfaces Majumdar, Partha; Stafslien, Shane; Daniels, Justin Journal of Coatings Technology and Research, Vol. 4, Issue 2 https://doi.org/10.1007/s11998-007-9015-2	journal	April 2007
Recent developments in superhydrophobic surfaces and their relevance to marine fouling: a review Genzer, Jan; Efimenko, Kirill Biofouling, Vol. 22, Issue 5 https://doi.org/10.1080/08927010600980223	journal	January 2006
Average nanorough skin surface of the pilot whale ( Globicephala melas , Delphinidae): considerations on the self-cleaning abilities based on nanoroughness C., Baum; W., Meyer; R., Stelzer Marine Biology, Vol. 140, Issue 3 https://doi.org/10.1007/s00227-001-0710-8	journal	March 2002
Bioinspired self-repairing slippery surfaces with pressure-stable omniphobicity Wong, Tak-Sing; Kang, Sung Hoon; Tang, Sindy K. Y. Nature, Vol. 477, Issue 7365, p. 443-447 https://doi.org/10.1038/nature10447	journal	September 2011
Fluorogel Elastomers with Tunable Transparency, Elasticity, Shape-Memory, and Antifouling Properties Yao, Xi; Dunn, Stuart S.; Kim, Philseok Angewandte Chemie International Edition, Vol. 53, Issue 17 https://doi.org/10.1002/anie.201310385	journal	March 2014
Hydrophobic Liquid-Infused Porous Polymer Surfaces for Antibacterial Applications Li, Junsheng; Kleintschek, Tanja; Rieder, Annika ACS Applied Materials & Interfaces, Vol. 5, Issue 14 https://doi.org/10.1021/am401532z	journal	July 2013
Slippery Liquid-Infused Porous Surfaces Showing Marine Antibiofouling Properties Xiao, Linlin; Li, Junsheng; Mieszkin, Sophie ACS Applied Materials & Interfaces, Vol. 5, Issue 20 https://doi.org/10.1021/am402635p	journal	October 2013
Antifouling Coatings: Recent Developments in the Design of Surfaces That Prevent Fouling by Proteins, Bacteria, and Marine Organisms Banerjee, Indrani; Pangule, Ravindra C.; Kane, Ravi S. Advanced Materials, Vol. 23, Issue 6, p. 690-718 https://doi.org/10.1002/adma.201001215	journal	September 2010
Bacterial flagella explore microscale hummocks and hollows to increase adhesion Friedlander, R. S.; Vlamakis, H.; Kim, P. Proceedings of the National Academy of Sciences, Vol. 110, Issue 14 https://doi.org/10.1073/pnas.1219662110	journal	March 2013
Mechanical factors favoring release from fouling release coatings Brady, Robert F.; Singer, Irwin L. Biofouling, Vol. 15, Issue 1-3 https://doi.org/10.1080/08927010009386299	journal	May 2000
Bio-Inspired Self-Cleaning Surfaces Liu, Kesong; Jiang, Lei Annual Review of Materials Research, Vol. 42, Issue 1 https://doi.org/10.1146/annurev-matsci-070511-155046	journal	August 2012
Hazard assessment of silicone oils (polydimethylsiloxanes, PDMS) used in antifouling-/foul-release-products in the marine environment Nendza, Monika Marine Pollution Bulletin, Vol. 54, Issue 8 https://doi.org/10.1016/j.marpolbul.2007.04.009	journal	August 2007
The Effects of Silicone Fluid Additives and Silicone Elastomer Matrices on Barnacle Adhesion Strength Kavanagh, Christopher J.; Swain, Geoffrey W.; Kovach, Brett S. Biofouling, Vol. 19, Issue 6 https://doi.org/10.1080/08927010310001623296	journal	December 2003
Evaluation of the performance enhancement of silicone biofouling‐release coatings by oil incorporation Truby, Kathryn; Wood, Christina; Stein, Judith Biofouling, Vol. 15, Issue 1-3 https://doi.org/10.1080/08927010009386305	journal	May 2000
Mini review: Biomimetic models and bioinspired surfaces for fouling control Scardino, Andrew J.; de Nys, Rocky Biofouling, Vol. 27, Issue 1 https://doi.org/10.1080/08927014.2010.536837	journal	December 2010
Bioinspired living skins for fouling mitigation Ganguli, Rahul; Mehrotra, Vivek; Dunn, Bruce Smart Materials and Structures, Vol. 18, Issue 10 https://doi.org/10.1088/0964-1726/18/10/104027	journal	September 2009
Omnidirectional Printing of 3D Microvascular Networks Wu, Willie; DeConinck, Adam; Lewis, Jennifer A. Advanced Materials, Vol. 23, Issue 24 https://doi.org/10.1002/adma.201004625	journal	March 2011
Interactions of Botryococcus braunii Cultures with Bacterial Biofilms Rivas, Mariella O.; Vargas, Pedro; Riquelme, Carlos E. Microbial Ecology, Vol. 60, Issue 3 https://doi.org/10.1007/s00248-010-9686-6	journal	May 2010
Studies on batch and continuous cultures of Botryococcus braunii: Hydrocarbon production in relation to physiological state, cell ultrastructure, and phosphate nutrition Casadevall, E.; Dif, D.; Largeau, C. Biotechnology and Bioengineering, Vol. 27, Issue 3, p. 286-295 https://doi.org/10.1002/bit.260270312	journal	March 1985
Microalgae Isolation and Selection for Prospective Biodiesel Production Duong, Van Thang; Li, Yan; Nowak, Ekaterina Energies, Vol. 5, Issue 6 https://doi.org/10.3390/en5061835	journal	June 2012
Effect of light-path length in outdoor flat plate reactors on output rate of cell mass and of EPA in Nannochloropsis sp. Zou, Ning; Richmond, Amos Journal of Biotechnology, Vol. 70, Issue 1-3 https://doi.org/10.1016/S0168-1656(99)00087-5	journal	April 1999
Stress-Induced Changes in Optical Properties, Pigment and Fatty Acid Content of Nannochloropsis sp.: Implications for Non-destructive Assay of Total Fatty Acids Solovchenko, Alexei; Khozin-Goldberg, Inna; Recht, Lee Marine Biotechnology, Vol. 13, Issue 3 https://doi.org/10.1007/s10126-010-9323-x	journal	September 2010
Fate and Effects of Polydimethylsiloxane (PDMS) in Marine Environments Stevens, Christine; Powell, David E.; Mäkelä, Petteri Marine Pollution Bulletin, Vol. 42, Issue 7 https://doi.org/10.1016/S0025-326X(00)00229-0	journal	July 2001
A Review of the Fate and Effects of Silicones in the Environment Graiver, D.; Farminer, K. W.; Narayan, R. Journal of Polymers and the Environment, Vol. 11, Issue 4, p. 129-136 https://doi.org/10.1023/A:1026056129717	journal	October 2003
Algal density assessed by spectrophotometry: A calibration curve for the unicellular algae Pseudokirchneriella subcapitata [English] Lúcia, Helena Ribeiro Rodrigues; Alexandre, Arenzon; Maria, Teresa Raya-Rodriguez Journal of Environmental Chemistry and Ecotoxicology, Vol. 3, Issue 8 https://doi.org/10.5897/JECE2011.025	journal	August 2011
Trends in the development of environmentally friendly fouling-resistant marine coatings Callow, James A.; Callow, Maureen E. Nature Communications, Vol. 2, Issue 1 https://doi.org/10.1038/ncomms1251	journal	March 2011

Cited By (31)

Extremely durable biofouling-resistant metallic surfaces based on electrodeposited nanoporous tungstite films on steel Tesler, Alexander B.; Kim, Philseok; Kolle, Stefan Nature Communications, Vol. 6, Issue 1 https://doi.org/10.1038/ncomms9649	journal	October 2015
Fluorine‐Free Slippery Liquid‐Infused Porous Surfaces Prepared Using Hierarchically Porous Aluminum Inoue, Tomohiro; Koyama, Akira; Kowalski, Damian physica status solidi (a), Vol. 217, Issue 13 https://doi.org/10.1002/pssa.201900836	journal	January 2020
Superhydrophobic Silicone/TiO ₂ –SiO ₂ Nanorod‐like Composites for Marine Fouling Release Coatings Selim, Mohamed S.; El‐Safty, Sherif A.; Azzam, Ahmed M. ChemistrySelect, Vol. 4, Issue 12 https://doi.org/10.1002/slct.201803314	journal	March 2019
Immobilized liquid layers: A new approach to anti-adhesion surfaces for medical applications Sotiri, Irini; Overton, Jonathan C.; Waterhouse, Anna Experimental Biology and Medicine, Vol. 241, Issue 9 https://doi.org/10.1177/1535370216640942	journal	March 2016
Recent advances in engineering topography mediated antibacterial surfaces Hasan, Jafar; Chatterjee, Kaushik Nanoscale, Vol. 7, Issue 38 https://doi.org/10.1039/c5nr04156b	journal	January 2015
Liquid-Infused Smooth Coating with Transparency, Super-Durability, and Extraordinary Hydrophobicity Tenjimbayashi, Mizuki; Togasawa, Ryo; Manabe, Kengo Advanced Functional Materials, Vol. 26, Issue 37 https://doi.org/10.1002/adfm.201602546	journal	August 2016
Infused polymers for cell sheet release Juthani, Nidhi; Howell, Caitlin; Ledoux, Haylea Scientific Reports, Vol. 6, Issue 1 https://doi.org/10.1038/srep26109	journal	May 2016
Biofilm Bridges Forming Structural Networks on Patterned Lubricant‐Infused Surfaces Lei, Wenxi; Bruchmann, Julia; Rüping, Jan Lars Advanced Science, Vol. 6, Issue 13 https://doi.org/10.1002/advs.201900519	journal	May 2019
Emerging Applications of Bioinspired Slippery Surfaces in Biomedical Fields He, Wenqing; Liu, Peng; Zhang, Jianqiang Chemistry - A European Journal, Vol. 24, Issue 56 https://doi.org/10.1002/chem.201801368	journal	July 2018
Liquid infused surfaces with anti-icing properties Wang, Guowei; Guo, Zhiguang Nanoscale, Vol. 11, Issue 47 https://doi.org/10.1039/c9nr06934h	journal	January 2019
Biofilms 2015: Multidisciplinary Approaches Shed Light into Microbial Life on Surfaces Visick, Karen L.; Schembri, Mark A.; Yildiz, Fitnat Journal of Bacteriology, Vol. 198, Issue 19 https://doi.org/10.1128/jb.00156-16	journal	March 2016
Vascularized Polymers Spatially Control Bacterial Cells on Surfaces Marquis, Kayla; Chasse, Benjamin; Regan, Daniel P. Advanced Biosystems, Vol. 4, Issue 1 https://doi.org/10.1002/adbi.201900216	journal	December 2019
Recent Advances in Bioinspired Gel Surfaces with Superwettability and Special Adhesion Zhang, Pengchao; Zhao, Chuangqi; Zhao, Tianyi Advanced Science, Vol. 6, Issue 18 https://doi.org/10.1002/advs.201900996	journal	July 2019
Responsive Ionogel Surface with Renewable Antibiofouling Properties Ye, Lijun; Chen, Fei; Liu, Jie Macromolecular Rapid Communications, Vol. 40, Issue 21 https://doi.org/10.1002/marc.201900395	journal	September 2019
Slippery Lubricant-Infused Surfaces: Properties and Emerging Applications Li, Junsheng; Ueda, Erica; Paulssen, Dorothea Advanced Functional Materials, Vol. 29, Issue 4 https://doi.org/10.1002/adfm.201802317	journal	December 2018
Recent Progress and Future Directions of Multifunctional (Super)Wetting Smooth/Structured Surfaces and Coatings Archer, Richard James; Becher‐Nienhaus, Brandon; Dunderdale, Gary J. Advanced Functional Materials, Vol. 30, Issue 26 https://doi.org/10.1002/adfm.201907772	journal	February 2020
Tunable Microscale Porous Systems with Dynamic Liquid Interfaces Zhan, Kan; Hou, Xu Small, Vol. 14, Issue 18 https://doi.org/10.1002/smll.201703283	journal	February 2018
External Stimuli Responsive Liquid‐Infused Surfaces Switching between Slippery and Nonslippery States: Fabrications and Applications Lou, Xiaoding; Huang, Yu; Yang, Xian Advanced Functional Materials, Vol. 30, Issue 10 https://doi.org/10.1002/adfm.201901130	journal	January 2020
Self-Healing Functional Surfaces Esteves, Catarina Advanced Materials Interfaces, Vol. 5, Issue 17 https://doi.org/10.1002/admi.201800293	journal	July 2018
Fouling Release Coatings Based on Polydimethylsiloxane with the Incorporation of Phenylmethylsilicone Oil Ba, Miao; Zhang, Zhanping; Qi, Yuhong Coatings, Vol. 8, Issue 5 https://doi.org/10.3390/coatings8050153	journal	April 2018
Earthworm-Inspired Rough Polymer Coatings with Self-Replenishing Lubrication for Adaptive Friction-Reduction and Antifouling Surfaces Zhao, Huaixia; Sun, Qiangqiang; Deng, Xu Advanced Materials, Vol. 30, Issue 29 https://doi.org/10.1002/adma.201802141	journal	June 2018
Fast self-replenishing slippery surfaces with a 3D fibrous porous network for the healing of surface properties Yan, Minglong; Zhang, Chunhong; Chen, Rongrong Journal of Materials Chemistry A, Vol. 7, Issue 43 https://doi.org/10.1039/c9ta08133j	journal	January 2019
Multistimuli Responsive Liquid‐Release in Dynamic Polymer Coatings for Controlling Surface Slipperiness and Optical Performance Zhao, Huaixia; Prieto‐López, Lizbeth Ofelia; Zhou, Xiaozhuang Advanced Materials Interfaces, Vol. 6, Issue 20 https://doi.org/10.1002/admi.201901028	journal	August 2019
Liquid‐Repellent Metal Oxide Photocatalysts Chen, Liwei; Hong, Jinkee; Butt, Hans‐Jürgen Chemistry – A European Journal, Vol. 25, Issue 18 https://doi.org/10.1002/chem.201804411	journal	January 2019
Designing Liquid‐Infused Surfaces for Medical Applications: A Review Howell, Caitlin; Grinthal, Alison; Sunny, Steffi Advanced Materials, Vol. 30, Issue 50 https://doi.org/10.1002/adma.201802724	journal	August 2018
Conductive Electrochemically Active Lubricant-Infused Nanostructured Surfaces Attenuate Coagulation and Enable Friction-Less Droplet Manipulation Hosseini, Amin; Villegas, Martin; Yang, Jie Advanced Materials Interfaces, Vol. 5, Issue 18 https://doi.org/10.1002/admi.201800617	journal	July 2018
Biomimetic self-slippery and transferable transparent lubricant-infused functional surfaces Wang, Zelinlan; Guo, Zhiguang Nanoscale, Vol. 10, Issue 42 https://doi.org/10.1039/c8nr07608a	journal	January 2018
Fluorine‐Free Slippery Liquid‐Infused Porous Surfaces Prepared Using Hierarchically Porous Aluminum Inoue, Tomohiro; Koyama, Akira; Kowalski, Damian physica status solidi (a), Vol. 217, Issue 13 https://doi.org/10.1002/pssa.202070042	journal	July 2020
Slippery Lubricant-Infused Surfaces: Properties and Emerging Applications Li, Junsheng; Ueda, Erica; Paulssen, Dorothea Karlsruhe https://doi.org/10.5445/ir/1000091944	text	January 2019
Biofilm Bridges Forming Structural Networks on Patterned Lubricant‐Infused Surfaces Lei, Wenxi; Bruchmann, Julia; Rüping, Jan Lars Karlsruhe https://doi.org/10.5445/ir/1000094417	text	January 2019
A Green Route for Substrate-Independent Oil-Repellent Coatings Xu, Li-Ping; Han, Da; Wu, Xiuwen Scientific Reports, Vol. 6, Issue 1 https://doi.org/10.1038/srep38016	journal	November 2016

Similar Records

Self-Replenishing Vascularized Fouling-Release Surfaces

Journal Article · Wed Aug 13 00:00:00 EDT 2014 · ACS Applied Materials and Interfaces · OSTI ID:1211111

Howell, Caitlin; Vu, Thy L.; Lin, Jennifer J.; +6 more

On the mechanism of marine fouling-prevention performance of oil-containing silicone elastomers

Journal Article · Tue Jul 12 00:00:00 EDT 2022 · Scientific Reports · OSTI ID:1211111

Kolle, Stefan; Ahanotu, Onyemaechi; Meeks, Amos; +13 more

Triblock Copolymers with Grafted Fluorine-Free Amphiphilic Non-Ionic Side Chains for Antifouling and Fouling-Release Applications

Journal Article · Sat Dec 31 00:00:00 EST 2011 · Macromolecules · OSTI ID:1211111

Cho, Y; Sundaram, H; Weinman, C; +7 more

Title: Self-Replenishing Vascularized Fouling-Release Surfaces

Citation Formats

References (37)

Cited By (31)

Similar Records

Related Subjects