skip to main content

Title: Analysis of Superconducting Dipole Coil of 11 GeV Super High Momentum Spectrometer

Jefferson Lab is constructing five Super High Momentum Spectrometer (SHMS) superconducting magnets for the 12 GeV Upgrade. This paper reports measured coil material properties and the results of the extensive finite element analysis (FEA) for the dipole coil. To properly define the smeared orthotropic material of the coil, a detailed coil model is set up to compute material parameters because not all parameters were measured. Stress and strain acceptance criteria are discussed. Eight load steps are defined. The preheat temperature of the force collar is optimized under two loading scenarios so that the positive pressure between the inner coil and central spacer is maintained while there is not too much squeeze to the coil.
 [1] ;  [1] ;  [1] ;  [1] ;  [1]
  1. JLAB
Publication Date:
OSTI Identifier:
Report Number(s):
JLAB-PHY-15-2040; DOE/OR/23177-3460
Journal ID: ISSN 1051-8223
DOE Contract Number:
Resource Type:
Journal Article
Resource Relation:
Journal Name: IEEE Transactions on Applied Superconductivity; Journal Volume: 25; Journal Issue: 3
Research Org:
Thomas Jefferson National Accelerator Facility, Newport News, VA (United States)
Sponsoring Org:
USDOE; USDOE Office of Science (SC)
Country of Publication:
United States