Electrochemical transfer of oxygen during direct current arc welding
- Colorado School of Mines, Golden, CO (United States)
Weld metal oxygen content is important for control of weld metal microstructure and notch toughness. Low oxygen contents promote low toughness bainitic structures. Moderate oxygen levels favor a tough acicular ferrite structure, and high oxygen levels promote lower toughness grain boundary and Widmanstaetten side plate structures. The objective of this research was to examine electrochemical oxygen transfer as a function of welding process variables, polarity, and the relative importance of conduction across plasma-metal and slag-metal interfaces for: submerged arc welding (SAW), shielded metal arc welding (SMAW), and gas tungsten arc welding (GTAW) processes. SAW and SMAW were made in DCEN and DCEP polarities on structural steel and copper substrates. GTAW were made on steel substrates in DCEN polarity. The experimental results show that both thermochemical and electrochemical reactions are important for oxygen transfer, and that there are differences in the electrochemical reactions at slag-metal and plasma-metal interfaces. Both electrochemical and thermochemical reactions are significant for direct current arc welding processes. The arc plasma acts as an electrolyte for arc welding processes and electrochemical reactions occur at the plasma-metal interface have chemical effects opposite to those at the slag metal interface. This is caused by the fact that only positive ions exist in the arc plasma in large concentrations.
- OSTI ID:
- 115465
- Report Number(s):
- CONF-9404233-; TRN: 95:002927-0043
- Resource Relation:
- Conference: 75. American Welding Society (AWS) annual meeting, Philadelphia, PA (United States), 10-15 Apr 1994; Other Information: PBD: 1994; Related Information: Is Part Of 75th Diamond anniversary American Welding Society annual meeting; PB: 273 p.
- Country of Publication:
- United States
- Language:
- English
Similar Records
Welding process selection for fabrication of a superconducting magnet structure
The role of titanium in the non-metallic inclusions which nucleate acicular ferrite in the submerged arc weld (SAW) fusion zones of Navy HY-100 steel