Detecting and imaging stress corrosion cracking in stainless steel, with application to inspecting storage canisters for spent nuclear fuel
Abstract
One of the primary concerns with the long-term performance of storage systems for spent nuclear fuel (SNF) is the potential for corrosion due to deliquescence of salts deposited as aerosols on the surface of the canister, which is typically made of austentic stainless steel. In regions of high residual weld stresses, this may lead to localized stress-corrosion cracking (SCC). The ability to detect and image SCC at an early stage (long before the cracks are susceptible to propagate through the thickness of the canister wall and leaks of radioactive material may occur) is essential to the performance evaluation and licensing process of the storage systems. In this paper, we explore a number of nondestructive testing techniques to detect and image SCC in austenitic stainless steel. Our attention is focused on a small rectangular sample of 1× 2 in2 with two cracks of mm-scale sizes. The techniques explored in this paper include nonlinear resonant ultrasound spectroscopy (NRUS) for detection, Linear Elastodynamic Gradient Imaging Technique (LEGIT), ultrasonic C-scan, vibrothermography, and synchrotron X-ray diffraction for imaging. Results obtained from these techniques are compared. Cracks of mm-scale sizes can be detected and imaged with all the techniques explored in this study.
- Authors:
-
- Los Alamos National Lab. (LANL), Los Alamos, NM (United States)
- North Carolina State Univ., Raleigh, NC (United States). Dept. of Nuclear Engineering
- Tohoku Univ., Sendai (Japan). Dept. of Materials Processing
- Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
- Brigham Young Univ., Provo, UT (United States). Dept. of Physics and Astronomy
- Colorado School of Mines, Golden, CO (United States). Dept. of Physics
- Publication Date:
- Research Org.:
- Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Los Alamos National Lab. (LANL), Los Alamos, NM (United States)
- Sponsoring Org.:
- USDOE Office of Nuclear Energy (NE)
- OSTI Identifier:
- 1810393
- Alternate Identifier(s):
- OSTI ID: 1576656
- Report Number(s):
- SAND-2021-3574J
Journal ID: ISSN 0963-8695; 697267; TRN: US2213036
- Grant/Contract Number:
- AC04-94AL85000; NE0008442
- Resource Type:
- Accepted Manuscript
- Journal Name:
- NDT & E International
- Additional Journal Information:
- Journal Volume: 109; Journal ID: ISSN 0963-8695
- Publisher:
- Elsevier
- Country of Publication:
- United States
- Language:
- English
- Subject:
- 12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE WASTES FROM NUCLEAR FACILITIES
Citation Formats
Remillieux, Marcel C., Kaoumi, Djamel, Ohara, Yoshikazu, Stuber Geesey, Marcie A., Xi, Li, Schoell, Ryan, Bryan, Charles R., Enos, David G., Summa, Deborah A., Ulrich, T. J., Anderson, Brian E., and Shayer, Zeev. Detecting and imaging stress corrosion cracking in stainless steel, with application to inspecting storage canisters for spent nuclear fuel. United States: N. p., 2019.
Web. doi:10.1016/j.ndteint.2019.102180.
Remillieux, Marcel C., Kaoumi, Djamel, Ohara, Yoshikazu, Stuber Geesey, Marcie A., Xi, Li, Schoell, Ryan, Bryan, Charles R., Enos, David G., Summa, Deborah A., Ulrich, T. J., Anderson, Brian E., & Shayer, Zeev. Detecting and imaging stress corrosion cracking in stainless steel, with application to inspecting storage canisters for spent nuclear fuel. United States. https://doi.org/10.1016/j.ndteint.2019.102180
Remillieux, Marcel C., Kaoumi, Djamel, Ohara, Yoshikazu, Stuber Geesey, Marcie A., Xi, Li, Schoell, Ryan, Bryan, Charles R., Enos, David G., Summa, Deborah A., Ulrich, T. J., Anderson, Brian E., and Shayer, Zeev. Thu .
"Detecting and imaging stress corrosion cracking in stainless steel, with application to inspecting storage canisters for spent nuclear fuel". United States. https://doi.org/10.1016/j.ndteint.2019.102180. https://www.osti.gov/servlets/purl/1810393.
@article{osti_1810393,
title = {Detecting and imaging stress corrosion cracking in stainless steel, with application to inspecting storage canisters for spent nuclear fuel},
author = {Remillieux, Marcel C. and Kaoumi, Djamel and Ohara, Yoshikazu and Stuber Geesey, Marcie A. and Xi, Li and Schoell, Ryan and Bryan, Charles R. and Enos, David G. and Summa, Deborah A. and Ulrich, T. J. and Anderson, Brian E. and Shayer, Zeev},
abstractNote = {One of the primary concerns with the long-term performance of storage systems for spent nuclear fuel (SNF) is the potential for corrosion due to deliquescence of salts deposited as aerosols on the surface of the canister, which is typically made of austentic stainless steel. In regions of high residual weld stresses, this may lead to localized stress-corrosion cracking (SCC). The ability to detect and image SCC at an early stage (long before the cracks are susceptible to propagate through the thickness of the canister wall and leaks of radioactive material may occur) is essential to the performance evaluation and licensing process of the storage systems. In this paper, we explore a number of nondestructive testing techniques to detect and image SCC in austenitic stainless steel. Our attention is focused on a small rectangular sample of 1× 2 in2 with two cracks of mm-scale sizes. The techniques explored in this paper include nonlinear resonant ultrasound spectroscopy (NRUS) for detection, Linear Elastodynamic Gradient Imaging Technique (LEGIT), ultrasonic C-scan, vibrothermography, and synchrotron X-ray diffraction for imaging. Results obtained from these techniques are compared. Cracks of mm-scale sizes can be detected and imaged with all the techniques explored in this study.},
doi = {10.1016/j.ndteint.2019.102180},
journal = {NDT & E International},
number = ,
volume = 109,
place = {United States},
year = {Thu Oct 31 00:00:00 EDT 2019},
month = {Thu Oct 31 00:00:00 EDT 2019}
}
Web of Science
Works referenced in this record:
C-mode acoustic microscopy applied to integrated circuit package inspection
journal, March 1992
- Moore, T. M.
- Solid-State Electronics, Vol. 35, Issue 3
The imaging of failure in structural materials by synchrotron radiation X-ray microtomography
journal, September 2017
- Wu, S. C.; Xiao, T. Q.; Withers, P. J.
- Engineering Fracture Mechanics, Vol. 182
Image registration methods: a survey
journal, October 2003
- Zitová, Barbara; Flusser, Jan
- Image and Vision Computing, Vol. 21, Issue 11
The sources of heat generation in vibrothermography
journal, December 2011
- Renshaw, Jeremy; Chen, John C.; Holland, Stephen D.
- NDT & E International, Vol. 44, Issue 8
Effect of Polymer and Ceramic Crevice Formers on the Crevice Corrosion of Ni-Cr-Mo Alloy 22
journal, October 2010
- Shan, X.; Payer, J. H.
- CORROSION, Vol. 66, Issue 10
Review of progress and applications in acoustic microscopy
journal, May 1974
- Kessler, L. W.
- The Journal of the Acoustical Society of America, Vol. 55, Issue 5
Frictional heating model for efficient use of vibrothermography
journal, July 2009
- Mabrouki, F.; Thomas, M.; Genest, M.
- NDT & E International, Vol. 42, Issue 5
Sonic infrared imaging of fatigue cracks
journal, January 2001
- Favro, L. D.; Thomas, R. L.; Han, X.
- International Journal of Fatigue, Vol. 23
Nonequilibrium and nonlinear dynamics in Berea and Fontainebleau sandstones: Low-strain regime
journal, January 2007
- Pasqualini, Donatella; Heitmann, Katrin; TenCate, James A.
- Journal of Geophysical Research, Vol. 112, Issue B1
Direct measurement procedure for three-dimensional local crack driving force using synchrotron X-ray microtomography
journal, December 2008
- Toda, H.; Yamamoto, S.; Kobayashi, M.
- Acta Materialia, Vol. 56, Issue 20
Image analysis of delamination cracks in carbon-fibre composites by scanning acoustic microscopy
journal, January 1994
- Todoroki, Akira; Kobayashi, Hideo; Lee, Jong Gi
- Composites Science and Technology, Vol. 52, Issue 4
Nondestructive inspection of spent nuclear fuel storage canisters using shear horizontal guided waves
journal, August 2018
- Choi, Sungho; Cho, Hwanjeong; Lissenden, Cliff J.
- Nuclear Engineering and Technology, Vol. 50, Issue 6
Fracture mechanics by three-dimensional crack-tip synchrotron X-ray microscopy
journal, March 2015
- Withers, P. J.
- Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, Vol. 373, Issue 2036
Review / Sythèse Nonlinear acoustic applications for material characterization: A review
journal, March 2000
- Zheng, Y.; Maev, R. Gr; Solodov, I. Yu
- Canadian Journal of Physics, Vol. 77, Issue 12
Multi-mode nonlinear resonance ultrasound spectroscopy for defect imaging: An analytical approach for the one-dimensional case
journal, July 2007
- Van Den Abeele, Koen
- The Journal of the Acoustical Society of America, Vol. 122, Issue 1
Superior techniques for eliminating ring artifacts in X-ray micro-tomography
journal, January 2018
- Vo, Nghia T.; Atwood, Robert C.; Drakopoulos, Michael
- Optics Express, Vol. 26, Issue 22
Acoustic microscopy with mechanical scanning—A review
journal, January 1979
- Quate, C. F.; Atalar, A.; Wickramasinghe, H. K.
- Proceedings of the IEEE, Vol. 67, Issue 8
Fatigue damage assessment by nonlinear ultrasonic materials characterization
journal, February 1998
- Nagy, Peter B.
- Ultrasonics, Vol. 36, Issue 1-5
In Situ Investigation of High Humidity Stress Corrosion Cracking of 7075 Aluminum Alloy by Three-Dimensional (3D) X-ray Synchrotron Tomography
journal, May 2014
- Singh, S. S.; Williams, J. J.; Lin, M. F.
- Materials Research Letters, Vol. 2, Issue 4
Three-dimensional fatigue crack growth behavior in an aluminum alloy investigated with in situ high-resolution synchrotron X-ray microtomography
journal, June 2009
- Zhang, H.; Toda, H.; Qu, P. C.
- Acta Materialia, Vol. 57, Issue 11
Nonlinear and Nonequilibrium Dynamics in Geomaterials
journal, August 2004
- TenCate, James A.; Pasqualini, Donatella; Habib, Salman
- Physical Review Letters, Vol. 93, Issue 6
Resonance and elastic nonlinear phenomena in rock
journal, May 1996
- Johnson, Paul A.; Zinszner, Bernard; Rasolofosaon, Patrick N. J.
- Journal of Geophysical Research: Solid Earth, Vol. 101, Issue B5
Quantification of material nonlinearity in relation to microdamage density using nonlinear reverberation spectroscopy: Experimental and theoretical study
journal, September 2009
- Van Den Abeele, K.; Le Bas, P. Y.; Van Damme, B.
- The Journal of the Acoustical Society of America, Vol. 126, Issue 3
Nonlinear resonant ultrasound spectroscopy of stress corrosion cracking in stainless steel rods
journal, March 2019
- Hogg, Stephen M.; Anderson, Brian E.; Le Bas, Pierre-Yves
- NDT & E International, Vol. 102
Three-dimensional visualisation of fatigue cracks in metals using high resolution synchrotron X-ray micro-tomography
journal, September 2006
- Buffiere, J. Y.; Ferrie, E.; Proudhon, H.
- Materials Science and Technology, Vol. 22, Issue 9
In Situ Experiments with X ray Tomography: an Attractive Tool for Experimental Mechanics
journal, January 2010
- Buffiere, J. -Y.; Maire, E.; Adrien, J.
- Experimental Mechanics, Vol. 50, Issue 3
Toward Robotic Inspection of Dry Storage Casks for Spent Nuclear Fuel
journal, February 2017
- Lissenden, C. J.; Choi, S.; Cho, H.
- Journal of Pressure Vessel Technology, Vol. 139, Issue 3
Comparison of Crevice Corrosion of Fe-Based Amorphous Metal and Crystalline Ni-Cr-Mo Alloy
journal, November 2008
- Shan, X.; Ha, H.; Payer, J. H.
- Metallurgical and Materials Transactions A, Vol. 40, Issue 6