Modeling Ti–6Al–4V using crystal plasticity, calibrated with multi-scale experiments, to understand the effect of the orientation and morphology of the α and β phases on time dependent cyclic loading
Abstract
Classically, crystal plasticity modeling has used a range of constitutive equations, in which the incorporation of additional physics-based relationships typically results in additional model parameters. These additional parameters need to be reliably calibrated, which often necessitates the use of a range of experimental data acquired at multiple length scales. In this work, a crystal plasticity based finite element (CPFE) model for a dual-phase Titanium alloy, Ti–6Al–4V, is developed. The α and β phases of the microstructure are explicitly modeled. The model is calibrated using a systematic optimization routine and experimental data that consist of macroscopic stress-strain curves coupled with lattice strains on different crystallographic planes for the two phases. These experimental data were obtained from in situ high energy X-ray diffraction experiments for multiple material pedigrees, with varying crystallographic orientation distribution and β volume fractions. Depending on the thermomechanical-processing route and the heat treatment used to manufacture the alloy, Ti–6Al–4V can exist in a wide number of microstructural forms, which often results in the α and β phases either having well aligned slip systems (following the Burgers orientation relationship (BOR)) or possessing no alignment of the slip systems across the interphase boundary (not following the BOR). In this study, themore »
- Authors:
-
- Purdue Univ., West Lafayette, IN (United States)
- Pratt & Whitney, East Hartford, CT (United States). Materials and Processes Engineering
- Argonne National Lab. (ANL), Argonne, IL (United States)
- Publication Date:
- Research Org.:
- Argonne National Lab. (ANL), Argonne, IL (United States)
- Sponsoring Org.:
- USDOE Office of Science (SC), Basic Energy Sciences (BES)
- OSTI Identifier:
- 1777463
- Grant/Contract Number:
- AC02-06CH11357
- Resource Type:
- Accepted Manuscript
- Journal Name:
- Journal of the Mechanics and Physics of Solids
- Additional Journal Information:
- Journal Volume: 146; Journal ID: ISSN 0022-5096
- Publisher:
- Elsevier
- Country of Publication:
- United States
- Language:
- English
- Subject:
- 36 MATERIALS SCIENCE; Burgers Orientation Relationship (BOR); Dwell Fatigue; Model Calibration; Parameter optimization; dual-phase Ti alloy
Citation Formats
Kapoor, Kartik, Ravi, Priya, Noraas, Ryan, Park, Jun-Sang, Venkatesh, Vasisht, and Sangid, Michael D. Modeling Ti–6Al–4V using crystal plasticity, calibrated with multi-scale experiments, to understand the effect of the orientation and morphology of the α and β phases on time dependent cyclic loading. United States: N. p., 2021.
Web. doi:10.1016/j.jmps.2020.104192.
Kapoor, Kartik, Ravi, Priya, Noraas, Ryan, Park, Jun-Sang, Venkatesh, Vasisht, & Sangid, Michael D. Modeling Ti–6Al–4V using crystal plasticity, calibrated with multi-scale experiments, to understand the effect of the orientation and morphology of the α and β phases on time dependent cyclic loading. United States. https://doi.org/10.1016/j.jmps.2020.104192
Kapoor, Kartik, Ravi, Priya, Noraas, Ryan, Park, Jun-Sang, Venkatesh, Vasisht, and Sangid, Michael D. Fri .
"Modeling Ti–6Al–4V using crystal plasticity, calibrated with multi-scale experiments, to understand the effect of the orientation and morphology of the α and β phases on time dependent cyclic loading". United States. https://doi.org/10.1016/j.jmps.2020.104192. https://www.osti.gov/servlets/purl/1777463.
@article{osti_1777463,
title = {Modeling Ti–6Al–4V using crystal plasticity, calibrated with multi-scale experiments, to understand the effect of the orientation and morphology of the α and β phases on time dependent cyclic loading},
author = {Kapoor, Kartik and Ravi, Priya and Noraas, Ryan and Park, Jun-Sang and Venkatesh, Vasisht and Sangid, Michael D.},
abstractNote = {Classically, crystal plasticity modeling has used a range of constitutive equations, in which the incorporation of additional physics-based relationships typically results in additional model parameters. These additional parameters need to be reliably calibrated, which often necessitates the use of a range of experimental data acquired at multiple length scales. In this work, a crystal plasticity based finite element (CPFE) model for a dual-phase Titanium alloy, Ti–6Al–4V, is developed. The α and β phases of the microstructure are explicitly modeled. The model is calibrated using a systematic optimization routine and experimental data that consist of macroscopic stress-strain curves coupled with lattice strains on different crystallographic planes for the two phases. These experimental data were obtained from in situ high energy X-ray diffraction experiments for multiple material pedigrees, with varying crystallographic orientation distribution and β volume fractions. Depending on the thermomechanical-processing route and the heat treatment used to manufacture the alloy, Ti–6Al–4V can exist in a wide number of microstructural forms, which often results in the α and β phases either having well aligned slip systems (following the Burgers orientation relationship (BOR)) or possessing no alignment of the slip systems across the interphase boundary (not following the BOR). In this study, the fully-calibrated CPFE model is used to gain a comprehensive understanding of the deformation behavior of Ti–6Al–4V, specifically, the effect of microstructures that follow the BOR (or not) on time-dependent cyclic loading (including the effects of dwell hold times).},
doi = {10.1016/j.jmps.2020.104192},
journal = {Journal of the Mechanics and Physics of Solids},
number = ,
volume = 146,
place = {United States},
year = {Fri Jan 01 00:00:00 EST 2021},
month = {Fri Jan 01 00:00:00 EST 2021}
}
Free Publicly Available Full Text
Publisher's Version of Record
Other availability
Search WorldCat to find libraries that may hold this journal
Save to My Library
You must Sign In or Create an Account in order to save documents to your library.
Works referenced in this record:
Slip and fatigue crack formation processes in an α/β titanium alloy in relation to crystallographic texture on different scales
journal, September 2008
- Bridier, F.; Villechaise, P.; Mendez, J.
- Acta Materialia, Vol. 56, Issue 15
Microstructural effects on strain rate and dwell sensitivity in dual-phase titanium alloys
journal, January 2019
- Waheed, Sana; Zheng, Zebang; Balint, Daniel S.
- Acta Materialia, Vol. 162
Modeling the deformation behavior of Hadfield steel single and polycrystals due to twinning and slip
journal, May 2000
- Karaman, I.; Sehitoglu, H.; Beaudoin, A. J.
- Acta Materialia, Vol. 48, Issue 9
Modeling Strain Localization in Microtextured Regions in a Titanium Alloy: Ti–6Al–4V
journal, October 2019
- Kapoor, Kartik; Noraas, Ryan; Seetharaman, Venkat
- Integrating Materials and Manufacturing Innovation, Vol. 8, Issue 4
The influence of mechanical constraints introduced by β annealed microstructures on the yield strength and ductility of Ti-6Al-4V
journal, June 2017
- Kasemer, Matthew; Quey, Romain; Dawson, Paul
- Journal of the Mechanics and Physics of Solids, Vol. 103
Modeling slip system strength evolution in Ti-7Al informed by in-situ grain stress measurements
journal, April 2017
- Pagan, Darren C.; Shade, Paul A.; Barton, Nathan R.
- Acta Materialia, Vol. 128
The role of elastic anisotropy, length scale and crystallographic slip in fatigue crack nucleation
journal, May 2013
- Sweeney, C. A.; Vorster, W.; Leen, S. B.
- Journal of the Mechanics and Physics of Solids, Vol. 61, Issue 5
A method for measuring single-crystal elastic moduli using high-energy X-ray diffraction and a crystal-based finite element model
journal, October 2010
- Efstathiou, C.; Boyce, D. E.; Park, J. -S.
- Acta Materialia, Vol. 58, Issue 17
Incorporating grain-level residual stresses and validating a crystal plasticity model of a two-phase Ti-6Al-4 V alloy produced via additive manufacturing
journal, December 2018
- Kapoor, Kartik; Yoo, Yung Suk Jeremy; Book, Todd A.
- Journal of the Mechanics and Physics of Solids, Vol. 121
Microstructural heterogeneity in rate-dependent plasticity of multiphase titanium alloys
journal, June 2017
- Zhang, Zhen; Dunne, Fionn P. E.
- Journal of the Mechanics and Physics of Solids, Vol. 103
Effects of heat treatment and build orientation on the evolution of ϵ and α′ martensite and strength during compressive loading of additively manufactured 304L stainless steel
journal, August 2020
- Ferreri, Nicholas C.; Pokharel, Reeju; Livescu, Veronica
- Acta Materialia, Vol. 195
Microstructure based fatigue life prediction framework for polycrystalline nickel-base superalloys with emphasis on the role played by twin boundaries in crack initiation
journal, April 2016
- Yeratapally, Saikumar R.; Glavicic, Michael G.; Hardy, Mark
- Acta Materialia, Vol. 107
Experimental measurement of lattice strain pole figures using synchrotron x rays
journal, November 2005
- Miller, M. P.; Bernier, J. V.; Park, J. -S.
- Review of Scientific Instruments, Vol. 76, Issue 11
The effect of the beta phase on the micromechanical response of dual-phase titanium alloys
journal, July 2017
- Ashton, Patrick J.; Jun, Tea-Sung; Zhang, Zhen
- International Journal of Fatigue, Vol. 100
A review of dwell sensitive fatigue in titanium alloys: the role of microstructure, texture and operating conditions
journal, September 2003
- Bache, M.
- International Journal of Fatigue, Vol. 25, Issue 9-11
The physics of fatigue crack initiation
journal, December 2013
- Sangid, Michael D.
- International Journal of Fatigue, Vol. 57
Insights on slip transmission at grain boundaries from atomistic simulations
journal, August 2014
- Spearot, Douglas E.; Sangid, Michael D.
- Current Opinion in Solid State and Materials Science, Vol. 18, Issue 4
The influence of microstructure on surface strain distributions in a nickel micro-tension specimen
journal, November 2012
- Turner, T. J.; Shade, P. A.; Schuren, J. C.
- Modelling and Simulation in Materials Science and Engineering, Vol. 21, Issue 1
Slip band–grain boundary interactions in commercial-purity titanium
journal, September 2014
- Guo, Y.; Britton, T. B.; Wilkinson, A. J.
- Acta Materialia, Vol. 76
Crystal plasticity modeling of slip activity in Ti–6Al–4V under high cycle fatigue loading
journal, June 2009
- Bridier, Florent; McDowell, David L.; Villechaise, Patrick
- International Journal of Plasticity, Vol. 25, Issue 6
Plastic strain localization in metals: origins and consequences
journal, January 2014
- Antolovich, Stephen D.; Armstrong, Ronald W.
- Progress in Materials Science, Vol. 59
Crystal Plasticity Finite-Element Analysis of Deformation Behavior in Multiple-Grained Lead-Free Solder Joints
journal, December 2012
- Darbandi, P.; Bieler, T. R.; Pourboghrat, F.
- Journal of Electronic Materials, Vol. 42, Issue 2
Determining the strengths of HCP slip systems using harmonic analyses of lattice strain distributions
journal, February 2018
- Dawson, Paul R.; Boyce, Donald E.; Park, Jun-Sang
- Acta Materialia, Vol. 144
DREAM.3D: A Digital Representation Environment for the Analysis of Microstructure in 3D
journal, April 2014
- Groeber, Michael A.; Jackson, Michael A.
- Integrating Materials and Manufacturing Innovation, Vol. 3, Issue 1
Room temperature deformation and mechanisms of slip transmission in oriented single-colony crystals of an α/β titanium alloy
journal, February 1999
- Suri, S.; Viswanathan, G. B.; Neeraj, T.
- Acta Materialia, Vol. 47, Issue 3
Lengthscale-dependent, elastically anisotropic, physically-based hcp crystal plasticity: Application to cold-dwell fatigue in Ti alloys
journal, June 2007
- Dunne, F. P. E.; Rugg, D.; Walker, A.
- International Journal of Plasticity, Vol. 23, Issue 6
On the mechanisms of fatigue facet nucleation in titanium alloys
journal, November 2008
- Dunne, F. P. E.; Rugg, D.
- Fatigue & Fracture of Engineering Materials & Structures, Vol. 31, Issue 11
Slip transfer across phase boundaries in dual phase titanium alloys and the effect on strain rate sensitivity
journal, May 2018
- Zheng, Zebang; Waheed, Sana; Balint, Daniel S.
- International Journal of Plasticity, Vol. 104
Strain and texture analysis of coatings using high-energy x-rays
journal, July 2003
- Almer, J.; Lienert, U.; Peng, R. L.
- Journal of Applied Physics, Vol. 94, Issue 1
Roles of microstructure in fatigue crack initiation
journal, September 2010
- Chan, Kwai S.
- International Journal of Fatigue, Vol. 32, Issue 9
Grain-scale experimental validation of crystal plasticity finite element simulations of tantalum oligocrystals
journal, September 2014
- Lim, H.; Carroll, J. D.; Battaile, C. C.
- International Journal of Plasticity, Vol. 60
Tension and torsion fatigue testing of a near-alpha titanium alloy
journal, September 1992
- Bache, M.; Evans, W.
- International Journal of Fatigue, Vol. 14, Issue 5
A neutron diffraction and modeling study of uniaxial deformation in polycrystalline beryllium
journal, July 2003
- Brown, D. W.; Bourke, M. A. M.; Tomé, C. N.
- Metallurgical and Materials Transactions A, Vol. 34, Issue 7
Crystallographic plasticity in fretting of Ti–6AL–4V
journal, October 2003
- Goh, Chung-Hyun; Neu, Richard W.; McDowell, David L.
- International Journal of Plasticity, Vol. 19, Issue 10
Crystal plasticity modeling of β phase deformation in Ti-6Al-4V
journal, August 2017
- Moore, John A.; Barton, Nathan R.; Florando, Jeff
- Modelling and Simulation in Materials Science and Engineering, Vol. 25, Issue 7
Orientation dependence of the strain-rate sensitivity and thermally activated flow in iron single crystals
journal, September 1970
- Spitzig, W. A.; Keh, A. S.
- Acta Metallurgica, Vol. 18, Issue 9
Influence of processing on microstructure and mechanical properties of (α+β) titanium alloys
journal, March 1998
- Lütjering, G.
- Materials Science and Engineering: A, Vol. 243, Issue 1-2
Crack nucleation using combined crystal plasticity modelling, high-resolution digital image correlation and high-resolution electron backscatter diffraction in a superalloy containing non-metallic inclusions under fatigue
journal, May 2016
- Zhang, Tiantian; Jiang, Jun; Britton, Ben
- Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, Vol. 472, Issue 2189
Identification of crystal plasticity parameters using DIC measurements and weighted FEMU
journal, September 2016
- Guery, Adrien; Hild, François; Latourte, Félix
- Mechanics of Materials, Vol. 100
Determination of Ti-6242 α and β slip properties using micro-pillar test and computational crystal plasticity
journal, October 2016
- Zhang, Zhen; Jun, Tea-Sung; Britton, T. Benjamin
- Journal of the Mechanics and Physics of Solids, Vol. 95
On cold dwell facet fatigue in titanium alloy aero-engine components
journal, April 2017
- Cuddihy, M. A.; Stapleton, A.; Williams, S.
- International Journal of Fatigue, Vol. 97
Measuring Stress Distributions in Ti-6Al-4V Using Synchrotron X-Ray Diffraction
journal, October 2008
- Bernier, J. V.; Park, J. -S.; Pilchak, A. L.
- Metallurgical and Materials Transactions A, Vol. 39, Issue 13
On the mechanistic basis of deformation at the microscale in hexagonal close-packed metals
journal, June 2015
- Britton, T. B.; Dunne, F. P. E.; Wilkinson, A. J.
- Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, Vol. 471, Issue 2178
Residual strains in HY100 polycrystals: Comparisons of experiments and simulations
journal, June 2000
- Dawson, Paul; Boyce, Donald; MacEwen, Stuart
- Metallurgical and Materials Transactions A, Vol. 31, Issue 6
Deformation and creep modeling in polycrystalline Ti–6Al alloys
journal, September 2003
- Hasija, Vikas; Ghosh, S.; Mills, Michael J.
- Acta Materialia, Vol. 51, Issue 15
Crystal plasticity simulations of fretting of Ti-6Al-4V in partial slip regime considering effects of texture
journal, January 2008
- Mayeur, Jason R.; McDowell, David L.; Neu, Richard W.
- Computational Materials Science, Vol. 41, Issue 3
Single-Crystal Elastic Moduli and the hcp → bcc Transformation in Ti, Zr, and Hf
journal, July 1964
- Fisher, E. S.; Renken, C. J.
- Physical Review, Vol. 135, Issue 2A
A mathematical representation of the multiaxial Bauschinger effect
journal, April 2007
- Frederick, C. O.; Armstrong, P. J.
- Materials at High Temperatures, Vol. 24, Issue 1
Microstructure-sensitive modeling of polycrystalline IN 100
journal, October 2008
- Shenoy, Mahesh; Tjiptowidjojo, Yustianto; McDowell, David
- International Journal of Plasticity, Vol. 24, Issue 10
Strain rate sensitivity, microstructure variations, and stress-assisted β → α′′ phase transformation investigation on the mechanical behavior of dual-phase titanium alloys
journal, August 2020
- Kapoor, Kartik; Ravi, Priya; Naragani, Diwakar
- Materials Characterization, Vol. 166
The role of defects and critical pore size analysis in the fatigue response of additively manufactured IN718 via crystal plasticity
journal, July 2018
- Prithivirajan, Veerappan; Sangid, Michael D.
- Materials & Design, Vol. 150
An investigation of the effects of microstructure on dwell fatigue crack growth in Ti-6242
journal, September 2005
- McBagonluri, F.; Akpan, E.; Mercer, C.
- Materials Science and Engineering: A, Vol. 405, Issue 1-2
Dwell fatigue in two Ti alloys: An integrated crystal plasticity and discrete dislocation study
journal, November 2016
- Zheng, Zebang; Balint, Daniel S.; Dunne, Fionn P. E.
- Journal of the Mechanics and Physics of Solids, Vol. 96
Evaluation of an inverse methodology for estimating constitutive parameters in face-centered cubic materials from single crystal indentations
journal, November 2017
- Chakraborty, Aritra; Eisenlohr, Philip
- European Journal of Mechanics - A/Solids, Vol. 66
Microstructure-based crystal plasticity modeling of cyclic deformation of Ti–6Al–4V
journal, August 2007
- Zhang, M.; Zhang, J.; McDowell, D. L.
- International Journal of Plasticity, Vol. 23, Issue 8
Anisotropy in the room-temperature deformation of α – β colonies in titanium alloys: role of the α – β interface
journal, April 2004
- Savage, M. F.; Tatalovich, J.; Mills, M. J.
- Philosophical Magazine, Vol. 84, Issue 11
A methodology to determine the elastic moduli of crystals by matching experimental and simulated lattice strain pole figures using discrete harmonics
journal, March 2017
- Wielewski, Euan; Boyce, Donald E.; Park, Jun-Sang
- Acta Materialia, Vol. 126
Intrinsic anisotropy of strain rate sensitivity in single crystal alpha titanium
journal, October 2016
- Zhang, Zhen; Jun, Tea-Sung; Britton, T. Benjamin
- Acta Materialia, Vol. 118
Initializing type-2 residual stresses in crystal plasticity finite element simulations utilizing high-energy diffraction microscopy data
journal, June 2018
- Kapoor, Kartik; Sangid, Michael D.
- Materials Science and Engineering: A, Vol. 729
Study of residual stresses in Ti-7Al using theory and experiments
journal, December 2017
- Chatterjee, K.; Ko, J. Y. P.; Weiss, J. T.
- Journal of the Mechanics and Physics of Solids, Vol. 109
A three-dimensional crystal plasticity model for duplex Ti–6Al–4V
journal, September 2007
- Mayeur, J. R.; McDowell, D. L.
- International Journal of Plasticity, Vol. 23, Issue 9
Anisotropy in hexagonal close-packed structures: improvements to crystal plasticity approaches applied to magnesium alloy
journal, December 2013
- Oppedal, A. L.; El Kadiri, Haitham; Tomé, C. N.
- Philosophical Magazine, Vol. 93, Issue 35
Uncertainty Quantification in the Mechanical Response of Crystal Plasticity Simulations
journal, June 2019
- Bandyopadhyay, Ritwik; Prithivirajan, Veerappan; Sangid, Michael D.
- JOM, Vol. 71, Issue 8
Grain-orientation-dependent residual stress and the effect of annealing in cold-rolled stainless steel
journal, April 2002
- Wang, Y. D.; Lin Peng, R.; Wang, X. -L
- Acta Materialia, Vol. 50, Issue 7
Texture heterogeneities induced by subtransus processing of near α titanium alloys
journal, September 2008
- Germain, L.; Gey, N.; Humbert, M.
- Acta Materialia, Vol. 56, Issue 16
Effect of microstructure on strain localization in a 7050 aluminum alloy: Comparison of experiments and modeling for various textures
journal, April 2016
- Mello, Alberto W.; Nicolas, Andrea; Lebensohn, Ricardo A.
- Materials Science and Engineering: A, Vol. 661
The Deformation and Ageing of Mild Steel: III Discussion of Results
journal, September 1951
- Hall, E. O.
- Proceedings of the Physical Society. Section B, Vol. 64, Issue 9
Crystal plasticity parameter identification with 3D measurements and Integrated Digital Image Correlation
journal, September 2016
- Bertin, Morgan; Du, Chaowei; Hoefnagels, Johan P. M.
- Acta Materialia, Vol. 116
Plastic heterogeneities of a copper multicrystal deformed in uniaxial tension: experimental study and finite element simulations
journal, March 2000
- Delaire, F.; Raphanel, J. L.; Rey, C.
- Acta Materialia, Vol. 48, Issue 5
Grain boundaries and interfaces in slip transfer
journal, August 2014
- Bieler, T. R.; Eisenlohr, P.; Zhang, C.
- Current Opinion in Solid State and Materials Science, Vol. 18, Issue 4
Dwell sensitive fatigue in a near alpha titanium alloy at ambient temperature
journal, June 1997
- Bache, M. R.; Cope, M.; Davies, H. M.
- International Journal of Fatigue, Vol. 19, Issue 93
On the consideration of interactions between dislocations and grain boundaries in crystal plasticity finite element modeling – Theory, experiments, and simulations
journal, May 2006
- Ma, A.; Roters, F.; Raabe, D.
- Acta Materialia, Vol. 54, Issue 8
A method to determine the orientation of the high-temperature beta phase from measured EBSD data for the low-temperature alpha phase in Ti-6Al-4V
journal, April 2003
- Glavicic, M. G.; Kobryn, P. A.; Bieler, T. R.
- Materials Science and Engineering: A, Vol. 346, Issue 1-2
Kinetics of flow and strain-hardening
journal, November 1981
- Mecking, H.; Kocks, U. F.
- Acta Metallurgica, Vol. 29, Issue 11
On rate-dependent polycrystal deformation: the temperature sensitivity of cold dwell fatigue
journal, September 2015
- Zhang, Zhen; Cuddihy, M. A.; Dunne, F. P. E.
- Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, Vol. 471, Issue 2181
Modeling the effect of twinning and detwinning during strain-path changes of magnesium alloy AZ31
journal, May 2009
- Proust, Gwénaëlle; Tomé, Carlos N.; Jain, Ashutosh
- International Journal of Plasticity, Vol. 25, Issue 5
A micromechanical analysis of the yielding behavior of individual widmanstätten colonies of an α + β titanium alloy
journal, November 2004
- Chan, Kwai S.
- Metallurgical and Materials Transactions A, Vol. 35, Issue 11
Crystal plasticity modeling of deformation and creep in polycrystalline Ti-6242
journal, May 2006
- Deka, Dhyanjyoti; Joseph, Deepu S.; Ghosh, Somnath
- Metallurgical and Materials Transactions A, Vol. 37, Issue 5
A Comparative Study on Dwell Fatigue of Ti-6Al-2Sn-4Zr-xMo (x = 2 to 6) Alloys on a Microstructure-Normalized Basis
journal, September 2014
- Qiu, Jianke; Ma, Yingjie; Lei, Jiafeng
- Metallurgical and Materials Transactions A, Vol. 45, Issue 13
A dislocation density based constitutive model for crystal plasticity FEM including geometrically necessary dislocations
journal, May 2006
- Ma, A.; Roters, F.; Raabe, D.
- Acta Materialia, Vol. 54, Issue 8