Quantifying uncertainty in the process-structure relationship for Al–Cu solidification
Abstract
Phase field method (PFM) is a simulation tool to predict microstructural evolution during solidification and is helpful to establish the process-structure relationship for alloys. The robustness of the relationship however is affected by model-form and parameter uncertainties in PFM. In this paper, the uncertainty associated with the thermodynamic and process parameters of PFM is studied and quantified. Surrogate modeling is used to interpolate four quantities of interests (QoIs), including dendritic perimeter, area, primary arm length, and solute segregation, as functions of thermodynamic and process parameters. A sparse grid approach is applied to mitigate the curse-of-dimensionality computational burden in uncertainty quantification. Polynomial chaos expansion is employed to obtain the probability density functions of the QoIs. The effect of parameter uncertainty on the Al–Cu dendritic growth during solidification simulation are investigated. Here, the results show that the dendritic morphology varies significantly with respect to the interface mobility and the initial temperature.
- Authors:
-
[1];
[1];
[2];
[1]
- Georgia Inst. of Technology, Atlanta, GA (United States)
- Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
- Publication Date:
- Research Org.:
- Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
- Sponsoring Org.:
- USDOE
- OSTI Identifier:
- 1559610
- Grant/Contract Number:
- AC05-00OR22725
- Resource Type:
- Accepted Manuscript
- Journal Name:
- Modelling and Simulation in Materials Science and Engineering
- Additional Journal Information:
- Journal Volume: 27; Journal Issue: 6; Journal ID: ISSN 0965-0393
- Publisher:
- IOP Publishing
- Country of Publication:
- United States
- Language:
- English
- Subject:
- 36 MATERIALS SCIENCE; uncertainty quantification; phasefield method; solidification; sparse grid; polynomial chaos expansion
Citation Formats
Tran, Anh, Liu, Dehao, Tran, Hoang A., and Wang, Yan. Quantifying uncertainty in the process-structure relationship for Al–Cu solidification. United States: N. p., 2019.
Web. doi:10.1088/1361-651X/ab2690.
Tran, Anh, Liu, Dehao, Tran, Hoang A., & Wang, Yan. Quantifying uncertainty in the process-structure relationship for Al–Cu solidification. United States. https://doi.org/10.1088/1361-651X/ab2690
Tran, Anh, Liu, Dehao, Tran, Hoang A., and Wang, Yan. Wed .
"Quantifying uncertainty in the process-structure relationship for Al–Cu solidification". United States. https://doi.org/10.1088/1361-651X/ab2690. https://www.osti.gov/servlets/purl/1559610.
@article{osti_1559610,
title = {Quantifying uncertainty in the process-structure relationship for Al–Cu solidification},
author = {Tran, Anh and Liu, Dehao and Tran, Hoang A. and Wang, Yan},
abstractNote = {Phase field method (PFM) is a simulation tool to predict microstructural evolution during solidification and is helpful to establish the process-structure relationship for alloys. The robustness of the relationship however is affected by model-form and parameter uncertainties in PFM. In this paper, the uncertainty associated with the thermodynamic and process parameters of PFM is studied and quantified. Surrogate modeling is used to interpolate four quantities of interests (QoIs), including dendritic perimeter, area, primary arm length, and solute segregation, as functions of thermodynamic and process parameters. A sparse grid approach is applied to mitigate the curse-of-dimensionality computational burden in uncertainty quantification. Polynomial chaos expansion is employed to obtain the probability density functions of the QoIs. The effect of parameter uncertainty on the Al–Cu dendritic growth during solidification simulation are investigated. Here, the results show that the dendritic morphology varies significantly with respect to the interface mobility and the initial temperature.},
doi = {10.1088/1361-651X/ab2690},
journal = {Modelling and Simulation in Materials Science and Engineering},
number = 6,
volume = 27,
place = {United States},
year = {Wed Jun 19 00:00:00 EDT 2019},
month = {Wed Jun 19 00:00:00 EDT 2019}
}
Free Publicly Available Full Text
Publisher's Version of Record
Other availability
Search WorldCat to find libraries that may hold this journal
Cited by: 10 works
Citation information provided by
Web of Science
Web of Science
Save to My Library
You must Sign In or Create an Account in order to save documents to your library.
Works referenced in this record:
Simple Cubature Formulas with High Polynomial Exactness
journal, October 1999
- Novak, Erich; Ritter, Klaus
- Constructive Approximation, Vol. 15, Issue 4
Quantitative phase-field modeling of dendritic growth in two and three dimensions
journal, April 1998
- Karma, Alain; Rappel, Wouter-Jan
- Physical Review E, Vol. 57, Issue 4
Topological structural analysis of digitized binary images by border following
journal, April 1985
- Suzuki, Satoshi; be, KeiichiA
- Computer Vision, Graphics, and Image Processing, Vol. 30, Issue 1
Quantifying Parameter Sensitivity and Uncertainty for Interatomic Potential Design: Application to Saturated Hydrocarbons
journal, September 2017
- Tschopp, Mark A.; Chris Rinderspacher, B.; Nouranian, Sasan
- ASCE-ASME J Risk and Uncert in Engrg Sys Part B Mech Engrg, Vol. 4, Issue 1
Front fluctuations for the stochastic Cahn–Hilliard equation
journal, May 2015
- Bertini, Lorenzo; Brassesco, Stella; Buttà, Paolo
- Brazilian Journal of Probability and Statistics, Vol. 29, Issue 2
Uncertainty analysis and estimation of robust AIREBO parameters for graphene
journal, February 2019
- Dhaliwal, Gurjot; Nair, Prasanth B.; Singh, Chandra Veer
- Carbon, Vol. 142
Phase-Field Formulation for Quantitative Modeling of Alloy Solidification
journal, August 2001
- Karma, Alain
- Physical Review Letters, Vol. 87, Issue 11
Uncertainty Quantification in Modeling Metal Alloy Solidification
journal, April 2017
- Fezi, Kyle; Krane, Matthew John M.
- Journal of Heat Transfer, Vol. 139, Issue 8
Uncertainty Quantification in Solidification Modelling
journal, June 2015
- Fezi, K.; Krane, M. J. M.
- IOP Conference Series: Materials Science and Engineering, Vol. 84
Effect of interface anisotropy on spacing selection in constrained dendrite growth
journal, October 2008
- Steinbach, I.
- Acta Materialia, Vol. 56, Issue 18
Generation of 3D representative volume elements for heterogeneous materials: A review
journal, July 2018
- Bargmann, Swantje; Klusemann, Benjamin; Markmann, Jürgen
- Progress in Materials Science, Vol. 96
An Efficient Saddle Point Search Method Using Kriging Metamodels
conference, January 2016
- He, Lijuan; Wang, Yan
- ASME 2015 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Volume 1A: 35th Computers and Information in Engineering Conference
A review of dendritic growth during solidification: Mathematical modeling and numerical simulations
journal, July 2017
- Jaafar, Mohamad Ali; Rousse, Daniel R.; Gibout, Stéphane
- Renewable and Sustainable Energy Reviews, Vol. 74
Stochastic Cahn–Hilliard Equation with Fractional Noise
journal, December 2008
- Bo, Lijun; Jiang, Yiming; Wang, Yongjin
- Stochastics and Dynamics, Vol. 08, Issue 04
An Efficient First-Principles Saddle Point Searching Method Based on Distributed Kriging Metamodels
journal, September 2017
- Tran, Anh; He, Lijuan; Wang, Yan
- ASCE-ASME J Risk and Uncert in Engrg Sys Part B Mech Engrg, Vol. 4, Issue 1
Computational microstructure characterization and reconstruction: Review of the state-of-the-art techniques
journal, June 2018
- Bostanabad, Ramin; Zhang, Yichi; Li, Xiaolin
- Progress in Materials Science, Vol. 95
Modeling of coupled motion and growth interaction of equiaxed dendritic crystals in a binary alloy during solidification
journal, March 2017
- Qi, Xin Bo; Chen, Yun; Kang, Xiu Hong
- Scientific Reports, Vol. 7, Issue 1
Orientation Dependence of Columnar Dendritic Growth with Sidebranching Behaviors in Directional Solidification: Insights from Phase-Field Simulations
journal, April 2018
- Xing, Hui; Dong, Xianglei; Wang, Jianyuan
- Metallurgical and Materials Transactions B, Vol. 49, Issue 4
Explicit Cost Bounds of Algorithms for Multivariate Tensor Product Problems
journal, March 1995
- Wasilkowski, G. W.; Wozniakowski, H.
- Journal of Complexity, Vol. 11, Issue 1
Mesoscale multi-physics simulation of rapid solidification of Ti-6Al-4V alloy
journal, January 2019
- Liu, Dehao; Wang, Yan
- Additive Manufacturing, Vol. 25
Uncertainty quantification in molecular dynamics studies of the glass transition temperature
journal, March 2016
- Patrone, Paul N.; Dienstfrey, Andrew; Browning, Andrea R.
- Polymer, Vol. 87
Uncertainty Quantification in Multiscale Simulation of Materials: A Prospective
journal, July 2013
- Chernatynskiy, Aleksandr; Phillpot, Simon R.; LeSar, Richard
- Annual Review of Materials Research, Vol. 43, Issue 1
Prediction Uncertainty of Density Functional Approximations for Properties of Crystals with Cubic Symmetry
journal, December 2014
- Pernot, Pascal; Civalleri, Bartolomeo; Presti, Davide
- The Journal of Physical Chemistry A, Vol. 119, Issue 21
Sensitivity analysis and uncertainty calculation for dispersion corrected density functional theory
journal, February 2011
- Hanke, Felix
- Journal of Computational Chemistry, Vol. 32, Issue 7
Evidence for a universal law of dendritic growth rates
journal, November 1978
- Langer, J. S.; Sekerka, R. F.; Fujioka, T.
- Journal of Crystal Growth, Vol. 44, Issue 4
Theory of dendritic growth—I. Elements of a stability analysis
journal, November 1978
- Langer, J. S.; Müller-Krumbhaar, H.
- Acta Metallurgica, Vol. 26, Issue 11
Model-Form Calibration in Drift-Diffusion Simulation Using Fractional Derivatives
journal, July 2016
- Wang, Yan
- ASCE-ASME J Risk and Uncert in Engrg Sys Part B Mech Engrg, Vol. 2, Issue 3
Reconciled Top-Down and Bottom-Up Hierarchical Multiscale Calibration of bcc fe Crystal Plasticity
journal, January 2017
- Tallman, Aaron E.; Swiler, Laura P.; Wang, Yan
- International Journal for Multiscale Computational Engineering, Vol. 15, Issue 6
Special Issue on Uncertainty Quantification in Multiscale System Design and Simulation
journal, September 2017
- Wang, Yan; Swiler, Laura
- ASCE-ASME J Risk and Uncert in Engrg Sys Part B Mech Engrg, Vol. 4, Issue 1
Data Driven, Predictive Molecular Dynamics for Nanoscale Flow Simulations under Uncertainty
journal, November 2013
- Angelikopoulos, Panagiotis; Papadimitriou, Costas; Koumoutsakos, Petros
- The Journal of Physical Chemistry B, Vol. 117, Issue 47
Measurements of microhardness during transient horizontal directional solidification of Al-Rich Al-Cu alloys: Effect of thermal parameters, primary dendrite arm spacing and Al2Cu intermetallic phase
journal, May 2015
- Barros, André Santos; Magno, Igor Alexsander; Souza, Fabrício Andrade
- Metals and Materials International, Vol. 21, Issue 3
Phase-field-lattice Boltzmann studies for dendritic growth with natural convection
journal, September 2017
- Takaki, Tomohiro; Rojas, Roberto; Sakane, Shinji
- Journal of Crystal Growth, Vol. 474
Uncertainty Quantification in MD Simulations. Part I: Forward Propagation
journal, January 2012
- Rizzi, F.; Najm, H. N.; Debusschere, B. J.
- Multiscale Modeling & Simulation, Vol. 10, Issue 4
Uncertainty Quantification and Polynomial Chaos Techniques in Computational Fluid Dynamics
journal, January 2009
- Najm, Habib N.
- Annual Review of Fluid Mechanics, Vol. 41, Issue 1
Reliable kinetic Monte Carlo simulation based on random set sampling
journal, February 2013
- Wang, Yan
- Soft Computing, Vol. 17, Issue 8
The multiphase-field model with an integrated concept for modelling solute diffusion
journal, April 1998
- Tiaden, J.; Nestler, B.; Diepers, H. J.
- Physica D: Nonlinear Phenomena, Vol. 115, Issue 1-2
Computational microstructure characterization and reconstruction for stochastic multiscale material design
journal, January 2013
- Liu, Yu; Steven Greene, M.; Chen, Wei
- Computer-Aided Design, Vol. 45, Issue 1
Bayesian Error Estimation in Density-Functional Theory
journal, November 2005
- Mortensen, J. J.; Kaasbjerg, K.; Frederiksen, S. L.
- Physical Review Letters, Vol. 95, Issue 21
Statistical approaches to forcefield calibration and prediction uncertainty in molecular simulation
journal, February 2011
- Cailliez, Fabien; Pernot, Pascal
- The Journal of Chemical Physics, Vol. 134, Issue 5
Multiscale Uncertainty Quantification Based on a Generalized Hidden Markov Model
journal, March 2011
- Wang, Yan
- Journal of Mechanical Design, Vol. 133, Issue 3
A dynamically adaptive sparse grids method for quasi-optimal interpolation of multidimensional functions
journal, June 2016
- Stoyanov, Miroslav K.; Webster, Clayton G.
- Computers & Mathematics with Applications, Vol. 71, Issue 11
Growth competition of columnar dendritic grains: A phase-field study
journal, January 2015
- Tourret, D.; Karma, A.
- Acta Materialia, Vol. 82
Morphological Stability of a Particle Growing by Diffusion or Heat Flow
journal, February 1963
- Mullins, W. W.; Sekerka, R. F.
- Journal of Applied Physics, Vol. 34, Issue 2
Uncertainty quantification in modelling equiaxed alloy solidification
journal, August 2016
- Fezi, Kyle; Krane, Matthew John M.
- International Journal of Cast Metals Research, Vol. 30, Issue 1
Review of Structure Representation and Reconstruction on Mesoscale and Microscale
journal, January 2014
- Li, Dongsheng
- JOM, Vol. 66, Issue 3
How Short Is Too Short for the Interactions of a Water Potential? Exploring the Parameter Space of a Coarse-Grained Water Model Using Uncertainty Quantification
journal, March 2014
- Jacobson, Liam C.; Kirby, Robert M.; Molinero, Valeria
- The Journal of Physical Chemistry B, Vol. 118, Issue 28
Quantification of Epistemic Uncertainty in Grain Attachment Models for Equiaxed Solidification
journal, February 2017
- Plotkowski, A.; Krane, M. J. M.
- Metallurgical and Materials Transactions B, Vol. 48, Issue 3
A Sparse Grid Stochastic Collocation Method for Partial Differential Equations with Random Input Data
journal, January 2008
- Nobile, F.; Tempone, R.; Webster, C. G.
- SIAM Journal on Numerical Analysis, Vol. 46, Issue 5
The Wiener--Askey Polynomial Chaos for Stochastic Differential Equations
journal, January 2002
- Xiu, Dongbin; Karniadakis, George Em
- SIAM Journal on Scientific Computing, Vol. 24, Issue 2
Uncertainty Quantification in MD Simulations. Part II: Bayesian Inference of Force-Field Parameters
journal, January 2012
- Rizzi, F.; Najm, H. N.; Debusschere, B. J.
- Multiscale Modeling & Simulation, Vol. 10, Issue 4
A Stochastic Projection Method for Fluid Flow
journal, September 2002
- Le Maı̂tre, Olivier P.; Reagan, Matthew T.; Najm, Habib N.
- Journal of Computational Physics, Vol. 181, Issue 1
Error correction in multi-fidelity molecular dynamics simulations using functional uncertainty quantification
journal, April 2017
- Reeve, Samuel Temple; Strachan, Alejandro
- Journal of Computational Physics, Vol. 334
Parallel multiphase field simulations with OpenPhase
journal, June 2017
- Tegeler, Marvin; Shchyglo, Oleg; Kamachali, Reza Darvishi
- Computer Physics Communications, Vol. 215
Numerical Challenges in the Use of Polynomial Chaos Representations for Stochastic Processes
journal, January 2004
- Debusschere, Bert J.; Najm, Habib N.; Pébay, Philippe P.
- SIAM Journal on Scientific Computing, Vol. 26, Issue 2
Reliable Molecular Dynamics: Uncertainty quantification using interval analysis in molecular dynamics simulation
journal, February 2017
- Tran, Anh V.; Wang, Yan
- Computational Materials Science, Vol. 127
A phase-field model with antitrapping current for multicomponent alloys with arbitrary thermodynamic properties
journal, August 2007
- Kim, Seong Gyoon
- Acta Materialia, Vol. 55, Issue 13
Stability of a Planar Interface During Solidification of a Dilute Binary Alloy
journal, February 1964
- Mullins, W. W.; Sekerka, R. F.
- Journal of Applied Physics, Vol. 35, Issue 2
Instabilities and pattern formation in crystal growth
journal, January 1980
- Langer, J. S.
- Reviews of Modern Physics, Vol. 52, Issue 1
Phase-field models in materials science
journal, July 2009
- Steinbach, Ingo
- Modelling and Simulation in Materials Science and Engineering, Vol. 17, Issue 7
Uncertainty Quantification of Modelling of Equiaxed Solidification
journal, July 2016
- Fezi, K.; Krane, M. J. M.
- IOP Conference Series: Materials Science and Engineering, Vol. 143
Error Estimates for Solid-State Density-Functional Theory Predictions: An Overview by Means of the Ground-State Elemental Crystals
journal, October 2013
- Lejaeghere, K.; Van Speybroeck, V.; Van Oost, G.
- Critical Reviews in Solid State and Materials Sciences, Vol. 39, Issue 1
Scaling laws governing the growth and interaction of equiaxed Al-Cu dendrites: A study combining experiments with phase-field simulations
journal, September 2018
- Boukellal, Ahmed Kaci; Debierre, Jean-Marc; Reinhart, Guillaume
- Materialia, Vol. 1
A Stability Function for Explicit Evaluation of the Mullins‐Sekerka Interface Stability Criterion
journal, January 1965
- Sekerka, R. F.
- Journal of Applied Physics, Vol. 36, Issue 1
Multiphase-field approach for multicomponent alloys with extrapolation scheme for numerical application
journal, June 2006
- Eiken, J.; Böttger, B.; Steinbach, I.
- Physical Review E, Vol. 73, Issue 6
A method for numerical integration on an automatic computer
journal, December 1960
- Clenshaw, C. W.; Curtis, A. R.
- Numerische Mathematik, Vol. 2, Issue 1
Simulating Mobile Dendrites in a Flow
journal, January 2013
- Medvedev, Dmitry; Varnik, Fathollah; Steinbach, Ingo
- Procedia Computer Science, Vol. 18
Uncertainty quantification in reacting-flow simulations through non-intrusive spectral projection
journal, February 2003
- Reagan, Matthew T.; Najm, Habib N.; Ghanem, Roger G.
- Combustion and Flame, Vol. 132, Issue 3