DOE PAGES title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Suppressing defects through the synergistic effect of a Lewis base and a Lewis acid for highly efficient and stable perovskite solar cells

Abstract

Achieving long-term operational stability at a high efficiency level for perovskite solar cells is the most challenging issue toward commercialization of this emerging photovoltaic technology. Here, we investigated the cooperation of a Lewis base and a Lewis acid by combining commercial bis-PCBM mixed isomers as the Lewis acid in the antisolvent and N-(4-bromophenyl)thiourea (BrPh-ThR) as the Lewis base in the perovskite solution precursor. The combination of the Lewis base and the Lewis acid synergistically passivates Pb2+ and PbX3– antisite defects, enlarges the perovskite grain size, and improves charge-carrier separation and transport, leading to improved device efficiency from 19.3% to 21.7%. In addition, this Lewis base and acid combination also suppresses moisture incursion and passivates pinholes generated in the hole-transporting layer. Furthermore, the unsealed devices remained at 93% of the initial efficiency value in ambient air (10–20% relative humidity) after 3600 h at 20–25 °C and dropped by 10% after 1500 h under continuous operation at 1-sun illumination and 55 °C in nitrogen with maximum power-point tracking.

Authors:
ORCiD logo [1];  [2];  [3]; ORCiD logo [4]; ORCiD logo [4]; ORCiD logo [4]; ORCiD logo [3]; ORCiD logo [4];  [3]
  1. National Renewable Energy Lab. (NREL), Golden, CO (United States); Ecole Polytechnique Federal de Lausanne (EPFL), Lausanne (Switzerland)
  2. Sun Yat-sen Univ., Guangzhou (People's Republic of China)
  3. Ecole Polytechnique Federal de Lausanne (EPFL), Lausanne (Switzerland)
  4. National Renewable Energy Lab. (NREL), Golden, CO (United States)
Publication Date:
Research Org.:
National Renewable Energy Laboratory (NREL), Golden, CO (United States)
Sponsoring Org.:
USDOE Office of Energy Efficiency and Renewable Energy (EERE)
OSTI Identifier:
1478732
Alternate Identifier(s):
OSTI ID: 1478267
Report Number(s):
NREL/JA-5900-71829
Journal ID: ISSN 1754-5692; EESNBY
Grant/Contract Number:  
AC36-08GO28308
Resource Type:
Accepted Manuscript
Journal Name:
Energy & Environmental Science
Additional Journal Information:
Journal Volume: 11; Journal Issue: 12; Journal ID: ISSN 1754-5692
Publisher:
Royal Society of Chemistry
Country of Publication:
United States
Language:
English
Subject:
14 SOLAR ENERGY; 36 MATERIALS SCIENCE; perovskite solar cells; stability; efficiency; photovoltaics; Lewis base; Lewis acid

Citation Formats

Zhang, Fei, Bi, Dongqin, Pellet, Norman, Xiao, Chuanxiao, Li, Zhen, Berry, Joseph J., Zakeeruddin, Shaik Mohammed, Zhu, Kai, and Grätzel, Michael. Suppressing defects through the synergistic effect of a Lewis base and a Lewis acid for highly efficient and stable perovskite solar cells. United States: N. p., 2018. Web. doi:10.1039/C8EE02252F.
Zhang, Fei, Bi, Dongqin, Pellet, Norman, Xiao, Chuanxiao, Li, Zhen, Berry, Joseph J., Zakeeruddin, Shaik Mohammed, Zhu, Kai, & Grätzel, Michael. Suppressing defects through the synergistic effect of a Lewis base and a Lewis acid for highly efficient and stable perovskite solar cells. United States. https://doi.org/10.1039/C8EE02252F
Zhang, Fei, Bi, Dongqin, Pellet, Norman, Xiao, Chuanxiao, Li, Zhen, Berry, Joseph J., Zakeeruddin, Shaik Mohammed, Zhu, Kai, and Grätzel, Michael. Mon . "Suppressing defects through the synergistic effect of a Lewis base and a Lewis acid for highly efficient and stable perovskite solar cells". United States. https://doi.org/10.1039/C8EE02252F. https://www.osti.gov/servlets/purl/1478732.
@article{osti_1478732,
title = {Suppressing defects through the synergistic effect of a Lewis base and a Lewis acid for highly efficient and stable perovskite solar cells},
author = {Zhang, Fei and Bi, Dongqin and Pellet, Norman and Xiao, Chuanxiao and Li, Zhen and Berry, Joseph J. and Zakeeruddin, Shaik Mohammed and Zhu, Kai and Grätzel, Michael},
abstractNote = {Achieving long-term operational stability at a high efficiency level for perovskite solar cells is the most challenging issue toward commercialization of this emerging photovoltaic technology. Here, we investigated the cooperation of a Lewis base and a Lewis acid by combining commercial bis-PCBM mixed isomers as the Lewis acid in the antisolvent and N-(4-bromophenyl)thiourea (BrPh-ThR) as the Lewis base in the perovskite solution precursor. The combination of the Lewis base and the Lewis acid synergistically passivates Pb2+ and PbX3– antisite defects, enlarges the perovskite grain size, and improves charge-carrier separation and transport, leading to improved device efficiency from 19.3% to 21.7%. In addition, this Lewis base and acid combination also suppresses moisture incursion and passivates pinholes generated in the hole-transporting layer. Furthermore, the unsealed devices remained at 93% of the initial efficiency value in ambient air (10–20% relative humidity) after 3600 h at 20–25 °C and dropped by 10% after 1500 h under continuous operation at 1-sun illumination and 55 °C in nitrogen with maximum power-point tracking.},
doi = {10.1039/C8EE02252F},
journal = {Energy & Environmental Science},
number = 12,
volume = 11,
place = {United States},
year = {Mon Oct 08 00:00:00 EDT 2018},
month = {Mon Oct 08 00:00:00 EDT 2018}
}

Journal Article:
Free Publicly Available Full Text
Publisher's Version of Record

Citation Metrics:
Cited by: 227 works
Citation information provided by
Web of Science

Figures / Tables:

Figure 1 Figure 1: (a) Schematic diagram of antisolvent process; (b) Schematic reaction process of perovskite growth resulting from combination of the Lewis base BrPh-ThR in the perovskite-solution precursor and the Lewis acid bis-PCBM in the antisolvent process.

Save / Share:

Works referenced in this record:

Induced Crystallization of Perovskites by a Perylene Underlayer for High-Performance Solar Cells
journal, May 2016


Self-formed grain boundary healing layer for highly efficient CH3NH3PbI3 perovskite solar cells
journal, June 2016


Tailored interfaces of unencapsulated perovskite solar cells for >1,000 hour operational stability
journal, January 2018


Adamantanes Enhance the Photovoltaic Performance and Operational Stability of Perovskite Solar Cells by Effective Mitigation of Interfacial Defect States
journal, April 2018

  • Tavakoli, Mohammad Mahdi; Bi, Dongqin; Pan, Linfeng
  • Advanced Energy Materials, Vol. 8, Issue 19
  • DOI: 10.1002/aenm.201800275

Improved performance and stability of perovskite solar cells by crystal crosslinking with alkylphosphonic acid ω-ammonium chlorides
journal, August 2015

  • Li, Xiong; Ibrahim Dar, M.; Yi, Chenyi
  • Nature Chemistry, Vol. 7, Issue 9
  • DOI: 10.1038/nchem.2324

Recent Advances in Improving the Stability of Perovskite Solar Cells
journal, November 2015

  • Tiep, Nguyen Huy; Ku, Zhiliang; Fan, Hong Jin
  • Advanced Energy Materials, Vol. 6, Issue 3
  • DOI: 10.1002/aenm.201501420

Suppressing defects through thiadiazole derivatives that modulate CH 3 NH 3 PbI 3 crystal growth for highly stable perovskite solar cells under dark conditions
journal, January 2018

  • Zhu, Hongwei; Zhang, Fei; Xiao, Yin
  • Journal of Materials Chemistry A, Vol. 6, Issue 12
  • DOI: 10.1039/C8TA00769A

A Bifunctional Lewis Base Additive for Microscopic Homogeneity in Perovskite Solar Cells
journal, August 2017


High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
journal, May 2015


A perylene diimide based polymer: a dual function interfacial material for efficient perovskite solar cells
journal, January 2017

  • Meng, Fanqi; Liu, Kuan; Dai, Shuixing
  • Materials Chemistry Frontiers, Vol. 1, Issue 6
  • DOI: 10.1039/C6QM00309E

Passivated Perovskite Crystallization via g -C 3 N 4 for High-Performance Solar Cells
journal, December 2017

  • Jiang, Lu-Lu; Wang, Zhao-Kui; Li, Meng
  • Advanced Functional Materials, Vol. 28, Issue 7
  • DOI: 10.1002/adfm.201705875

Colloidally prepared La-doped BaSnO 3 electrodes for efficient, photostable perovskite solar cells
journal, March 2017


Giant switchable photovoltaic effect in organometal trihalide perovskite devices
journal, December 2014

  • Xiao, Zhengguo; Yuan, Yongbo; Shao, Yuchuan
  • Nature Materials, Vol. 14, Issue 2
  • DOI: 10.1038/nmat4150

Efficient luminescent solar cells based on tailored mixed-cation perovskites
journal, January 2016


Tuning the crystal growth of perovskite thin-films by adding the 2-pyridylthiourea additive for highly efficient and stable solar cells prepared in ambient air
journal, January 2017

  • Sun, Mengna; Zhang, Fei; Liu, Hongli
  • Journal of Materials Chemistry A, Vol. 5, Issue 26
  • DOI: 10.1039/C7TA00894E

Ion Migration in Organometal Trihalide Perovskite and Its Impact on Photovoltaic Efficiency and Stability
journal, January 2016


Stable High-Performance Perovskite Solar Cells via Grain Boundary Passivation
journal, March 2018


π-Conjugated Lewis Base: Efficient Trap-Passivation and Charge-Extraction for Hybrid Perovskite Solar Cells
journal, December 2016


High-Mobility p-Type Organic Semiconducting Interlayer Enhancing Efficiency and Stability of Perovskite Solar Cells
journal, April 2017


Hysteresis-free perovskite solar cells made of potassium-doped organometal halide perovskite
journal, September 2017


Organometal halide perovskite solar cells: degradation and stability
journal, January 2016

  • Berhe, Taame Abraha; Su, Wei-Nien; Chen, Ching-Hsiang
  • Energy & Environmental Science, Vol. 9, Issue 2
  • DOI: 10.1039/C5EE02733K

Influence of Electrode Interfaces on the Stability of Perovskite Solar Cells: Reduced Degradation Using MoO x /Al for Hole Collection
journal, April 2016


Electron-hole diffusion lengths > 175 μm in solution-grown CH 3 NH 3 PbI 3 single crystals
journal, January 2015


Isomer-Pure Bis-PCBM-Assisted Crystal Engineering of Perovskite Solar Cells Showing Excellent Efficiency and Stability
journal, February 2017


Planar Heterojunction Perovskite Solar Cells via Vapor-Assisted Solution Process
journal, December 2013

  • Chen, Qi; Zhou, Huanping; Hong, Ziruo
  • Journal of the American Chemical Society, Vol. 136, Issue 2, p. 622-625
  • DOI: 10.1021/ja411509g

Highly Efficient and Stable Perovskite Solar Cells Based on Monolithically Grained CH 3 NH 3 PbI 3 Film
journal, December 2016


Investigation on the role of Lewis bases in the ripening process of perovskite films for highly efficient perovskite solar cells
journal, January 2017

  • Zhu, Lifeng; Xu, Yuzuan; Zhang, Pengpeng
  • J. Mater. Chem. A, Vol. 5, Issue 39
  • DOI: 10.1039/C7TA05378A

Low-temperature solution-processed wavelength-tunable perovskites for lasing
journal, March 2014

  • Xing, Guichuan; Mathews, Nripan; Lim, Swee Sien
  • Nature Materials, Vol. 13, Issue 5
  • DOI: 10.1038/nmat3911

Fused-Ring Electron Acceptor ITIC-Th: A Novel Stabilizer for Halide Perovskite Precursor Solution
journal, March 2018

  • Qin, Minchao; Cao, Jie; Zhang, Tiankai
  • Advanced Energy Materials, Vol. 8, Issue 18
  • DOI: 10.1002/aenm.201703399

Perovskite solar cells with 18.21% efficiency and area over 1 cm2 fabricated by heterojunction engineering
journal, September 2016


Chemical Reduction of Intrinsic Defects in Thicker Heterojunction Planar Perovskite Solar Cells
journal, April 2017


Bulk heterojunction perovskite hybrid solar cells with large fill factor
journal, January 2015

  • Wang, Kai; Liu, Chang; Du, Pengcheng
  • Energy & Environmental Science, Vol. 8, Issue 4
  • DOI: 10.1039/C5EE00222B

A Fast Deposition-Crystallization Procedure for Highly Efficient Lead Iodide Perovskite Thin-Film Solar Cells
journal, July 2014


Polymer-templated nucleation and crystal growth of perovskite films for solar cells with efficiency greater than 21%
journal, September 2016


Bulk heterojunction perovskite–PCBM solar cells with high fill factor
journal, February 2016


Perovskite–fullerene hybrid materials suppress hysteresis in planar diodes
journal, May 2015

  • Xu, Jixian; Buin, Andrei; Ip, Alexander H.
  • Nature Communications, Vol. 6, Issue 1
  • DOI: 10.1038/ncomms8081

Lewis Acid–Base Adduct Approach for High Efficiency Perovskite Solar Cells
journal, January 2016


A Lewis Base-Assisted Passivation Strategy Towards Highly Efficient and Stable Perovskite Solar Cells
journal, May 2018


Enhanced Photoluminescence and Solar Cell Performance via Lewis Base Passivation of Organic–Inorganic Lead Halide Perovskites
journal, September 2014

  • Noel, Nakita K.; Abate, Antonio; Stranks, Samuel D.
  • ACS Nano, Vol. 8, Issue 10
  • DOI: 10.1021/nn5036476

Efficient planar heterojunction perovskite solar cells by vapour deposition
journal, September 2013

  • Liu, Mingzhen; Johnston, Michael B.; Snaith, Henry J.
  • Nature, Vol. 501, Issue 7467, p. 395-398
  • DOI: 10.1038/nature12509

A vacuum flash–assisted solution process for high-efficiency large-area perovskite solar cells
journal, June 2016


Stable high efficiency two-dimensional perovskite solar cells via cesium doping
journal, January 2017

  • Zhang, Xu; Ren, Xiaodong; Liu, Bin
  • Energy & Environmental Science, Vol. 10, Issue 10
  • DOI: 10.1039/C7EE01145H

Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
journal, September 2016


Achieving long-term stable perovskite solar cells via ion neutralization
journal, January 2016

  • Back, Hyungcheol; Kim, Geunjin; Kim, Junghwan
  • Energy & Environmental Science, Vol. 9, Issue 4
  • DOI: 10.1039/C6EE00612D

Enhanced Performance of Perovskite Solar Cells with Zinc Chloride Additives
journal, December 2017

  • Jin, Junjie; Li, Hao; Chen, Cong
  • ACS Applied Materials & Interfaces, Vol. 9, Issue 49
  • DOI: 10.1021/acsami.7b15310

Impact of grain boundaries on efficiency and stability of organic-inorganic trihalide perovskites
journal, December 2017


Defect passivation in hybrid perovskite solar cells using quaternary ammonium halide anions and cations
journal, June 2017


A PCBM-assisted perovskite growth process to fabricate high efficiency semitransparent solar cells
journal, January 2016

  • Li, Chao; Sleppy, Joseph; Dhasmana, Nitesh
  • Journal of Materials Chemistry A, Vol. 4, Issue 30
  • DOI: 10.1039/C6TA04790D

Supramolecular Halogen Bond Passivation of Organic–Inorganic Halide Perovskite Solar Cells
journal, May 2014

  • Abate, Antonio; Saliba, Michael; Hollman, Derek J.
  • Nano Letters, Vol. 14, Issue 6
  • DOI: 10.1021/nl500627x

Systematic investigation of the impact of operation conditions on the degradation behaviour of perovskite solar cells
journal, January 2018


A Fast Deposition-Crystallization Procedure for Highly Efficient Lead Iodide Perovskite Thin-Film Solar Cells
journal, July 2014

  • Xiao, Manda; Huang, Fuzhi; Huang, Wenchao
  • Angewandte Chemie International Edition, Vol. 53, Issue 37
  • DOI: 10.1002/anie.201405334

Ion Migration in Organometal Trihalide Perovskite and Its Impact on Photovoltaic Efficiency and Stability
text, January 2016


Works referencing / citing this record:

Conjugated Polymer–Assisted Grain Boundary Passivation for Efficient Inverted Planar Perovskite Solar Cells
journal, May 2019


Improving Charge Transport via Intermediate‐Controlled Crystal Growth in 2D Perovskite Solar Cells
journal, April 2019

  • Gao, Liguo; Zhang, Fei; Xiao, Chuanxiao
  • Advanced Functional Materials, Vol. 29, Issue 47
  • DOI: 10.1002/adfm.201901652

Additive Engineering for Efficient and Stable Perovskite Solar Cells
journal, October 2019


Progress of Surface Science Studies on ABX 3 ‐Based Metal Halide Perovskite Solar Cells
journal, April 2020

  • Qiu, Longbin; He, Sisi; Ono, Luis K.
  • Advanced Energy Materials, Vol. 10, Issue 13
  • DOI: 10.1002/aenm.201902726

Emerging Conductive Atomic Force Microscopy for Metal Halide Perovskite Materials and Solar Cells
journal, March 2020

  • Si, Haonan; Zhang, Suicai; Ma, Shuangfei
  • Advanced Energy Materials, Vol. 10, Issue 10
  • DOI: 10.1002/aenm.201903922

Verringerung schädlicher Defekte für leistungsstarke Metallhalogenid‐Perowskit‐Solarzellen
journal, April 2020

  • Ono, Luis K.; Liu, Shengzhong (Frank); Qi, Yabing
  • Angewandte Chemie, Vol. 132, Issue 17
  • DOI: 10.1002/ange.201905521

Enhanced Charge Transport by Incorporating Formamidinium and Cesium Cations into Two‐Dimensional Perovskite Solar Cells
journal, July 2019


Reducing Detrimental Defects for High‐Performance Metal Halide Perovskite Solar Cells
journal, January 2020

  • Ono, Luis K.; Liu, Shengzhong (Frank); Qi, Yabing
  • Angewandte Chemie International Edition, Vol. 59, Issue 17
  • DOI: 10.1002/anie.201905521

Improving Performance and Stability of Planar Perovskite Solar Cells through Grain Boundary Passivation with Block Copolymers
journal, May 2019


Progress in Multifunctional Molecules for Perovskite Solar Cells
journal, July 2019


Stability improvement under high efficiency—next stage development of perovskite solar cells
journal, April 2019


Lead halide perovskites for photocatalytic organic synthesis
journal, June 2019


Consensus statement for stability assessment and reporting for perovskite photovoltaics based on ISOS procedures
journal, January 2020


Enhancing electron transport via graphene quantum dot/SnO 2 composites for efficient and durable flexible perovskite photovoltaics
journal, January 2019

  • Zhou, Yu; Yang, Sisi; Yin, Xuewen
  • Journal of Materials Chemistry A, Vol. 7, Issue 4
  • DOI: 10.1039/c8ta10168j

Alternative electrodes for HTMs and noble-metal-free perovskite solar cells: 2D MXenes electrodes
journal, January 2019

  • Cao, Junmei; Meng, Fanning; Gao, Liguo
  • RSC Advances, Vol. 9, Issue 59
  • DOI: 10.1039/c9ra06091j

Enhanced perovskite crystallization by the polyvinylpyrrolidone additive for high efficiency solar cells
journal, January 2019

  • Yan, Jin; Li, Nan; Ai, Yuqian
  • Sustainable Energy & Fuels, Vol. 3, Issue 12
  • DOI: 10.1039/c9se00632j

Cost-effective dopant-free star-shaped oligo-aryl amines for high performance perovskite solar cells
journal, January 2019

  • Feng, Jun-Ying; Lai, Kuan-Wen; Shiue, Yuan-Shin
  • Journal of Materials Chemistry A, Vol. 7, Issue 23
  • DOI: 10.1039/c9ta01278h

Enhanced efficacy of defect passivation and charge extraction for efficient perovskite photovoltaics with a small open circuit voltage loss
journal, January 2019

  • Liao, Jin-Feng; Wu, Wu-Qiang; Zhong, Jun-Xing
  • Journal of Materials Chemistry A, Vol. 7, Issue 15
  • DOI: 10.1039/c9ta01760g

Efficient and stable carbon-based perovskite solar cells enabled by the inorganic interface of CuSCN and carbon nanotubes
journal, January 2019

  • Wu, Xin; Xie, Liqiang; Lin, Kebin
  • Journal of Materials Chemistry A, Vol. 7, Issue 19
  • DOI: 10.1039/c9ta02014d

Polyethyleneimine-functionalized carbon nanotubes as an interlayer to bridge perovskite/carbon for all inorganic carbon-based perovskite solar cells
journal, January 2019

  • Yang, Yinglong; Chen, Haining; Hu, Chen
  • Journal of Materials Chemistry A, Vol. 7, Issue 38
  • DOI: 10.1039/c9ta08177a

A dithieno[3,2- b :2′,3′- d ]pyrrole-cored four-arm hole transporting material for over 19% efficiency dopant-free perovskite solar cells
journal, January 2019

  • Dong, Zihao; Yin, Xinxing; Ali, Amjad
  • Journal of Materials Chemistry C, Vol. 7, Issue 31
  • DOI: 10.1039/c9tc03111a

Poly(vinylpyrrolidone)-doped SnO 2 as an electron transport layer for perovskite solar cells with improved performance
journal, January 2019

  • Wang, Di; Chen, Shan-Ci; Zheng, Qingdong
  • Journal of Materials Chemistry C, Vol. 7, Issue 39
  • DOI: 10.1039/c9tc04269e

Secondary lateral growth of MAPbI 3 grains for the fabrication of efficient perovskite solar cells
journal, January 2020

  • Li, Chengbo; Wang, Aili; Xie, Lisha
  • Journal of Materials Chemistry C, Vol. 8, Issue 9
  • DOI: 10.1039/c9tc06293a

Enhanced Charge Transport by Incorporating Formamidinium and Cesium Cations into Two-Dimensional Perovskite Solar Cells
journal, July 2019

  • Gao, Liguo; Zhang, Fei; Chen, Xihan
  • Angewandte Chemie International Edition, Vol. 58, Issue 34
  • DOI: 10.1002/anie.201905690

Consensus statement for stability assessment and reporting for perovskite photovoltaics based on ISOS procedures
text, January 2020

  • Khenkin, Mark V.; Katz, Eugene A.; Abate, Antonio
  • Apollo - University of Cambridge Repository
  • DOI: 10.17863/cam.63659

Improving Performance and Stability of Planar Perovskite Solar Cells through Grain Boundary Passivation with Block Copolymers
journal, May 2019


Consensus statement for stability assessment and reporting for perovskite photovoltaics based on ISOS procedures
text, January 2020

  • Khenkin, Mv; Katz, Ea; Abate, A.
  • Apollo - University of Cambridge Repository
  • DOI: 10.17863/cam.54194

Figures/Tables have been extracted from DOE-funded journal article accepted manuscripts.