High-temperature effects on the light transmission through sapphire optical fiber
Abstract
Single crystal sapphire optical fiber was tested at high temperatures (1500°C) to determine its suitability for optical instrumentation in high-temperature environments. Broadband light transmission (450-2300 nm) through sapphire fiber was measured as a function of temperature as a test of the fiber's ability to survive and operate in high-temperature environments. Upon heating sapphire fiber to 1400°C, large amounts of light attenuation were measured across the entire range of light wavelengths that were tested. SEM and TEM images of the heated sapphire fiber indicated that a layer had formed at the surface of the fiber, most likely due to a chemical change at high temperatures. The microscopy results suggest that the surface layer may be in the form of aluminum hydroxide. Subsequent tests of sapphire fiber in an inert atmosphere showed minimal light attenuation at high temperatures along with the elimination of any surface layers on the fiber, indicating that the air atmosphere is indeed responsible for the increased attenuation and surface layer formation at high temperatures.
- Authors:
-
- The Ohio State Univ., Columbus, OH (United States)
- Publication Date:
- Research Org.:
- Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)
- Sponsoring Org.:
- USDOE
- OSTI Identifier:
- 1429184
- Alternate Identifier(s):
- OSTI ID: 1426309
- Grant/Contract Number:
- AC05-00OR22725
- Resource Type:
- Accepted Manuscript
- Journal Name:
- Journal of the American Ceramic Society
- Additional Journal Information:
- Journal Volume: 101; Journal Issue: 8; Journal ID: ISSN 0002-7820
- Publisher:
- American Ceramic Society
- Country of Publication:
- United States
- Language:
- English
- Subject:
- 36 MATERIALS SCIENCE; sapphire, optical materials/properties
Citation Formats
Wilson, Brandon A., Petrie, Christian M., and Blue, Thomas E. High-temperature effects on the light transmission through sapphire optical fiber. United States: N. p., 2018.
Web. doi:10.1111/jace.15515.
Wilson, Brandon A., Petrie, Christian M., & Blue, Thomas E. High-temperature effects on the light transmission through sapphire optical fiber. United States. https://doi.org/10.1111/jace.15515
Wilson, Brandon A., Petrie, Christian M., and Blue, Thomas E. Tue .
"High-temperature effects on the light transmission through sapphire optical fiber". United States. https://doi.org/10.1111/jace.15515. https://www.osti.gov/servlets/purl/1429184.
@article{osti_1429184,
title = {High-temperature effects on the light transmission through sapphire optical fiber},
author = {Wilson, Brandon A. and Petrie, Christian M. and Blue, Thomas E.},
abstractNote = {Single crystal sapphire optical fiber was tested at high temperatures (1500°C) to determine its suitability for optical instrumentation in high-temperature environments. Broadband light transmission (450-2300 nm) through sapphire fiber was measured as a function of temperature as a test of the fiber's ability to survive and operate in high-temperature environments. Upon heating sapphire fiber to 1400°C, large amounts of light attenuation were measured across the entire range of light wavelengths that were tested. SEM and TEM images of the heated sapphire fiber indicated that a layer had formed at the surface of the fiber, most likely due to a chemical change at high temperatures. The microscopy results suggest that the surface layer may be in the form of aluminum hydroxide. Subsequent tests of sapphire fiber in an inert atmosphere showed minimal light attenuation at high temperatures along with the elimination of any surface layers on the fiber, indicating that the air atmosphere is indeed responsible for the increased attenuation and surface layer formation at high temperatures.},
doi = {10.1111/jace.15515},
journal = {Journal of the American Ceramic Society},
number = 8,
volume = 101,
place = {United States},
year = {Tue Mar 13 00:00:00 EDT 2018},
month = {Tue Mar 13 00:00:00 EDT 2018}
}
Web of Science
Figures / Tables:
Works referenced in this record:
Infrared Properties of Sapphire at Elevated Temperatures
journal, January 1962
- Oppenheim, U. P.; Even, U.
- Journal of the Optical Society of America, Vol. 52, Issue 9
Radiation Energy Transfer and Thermal Conductivity of Ceramic Oxides
journal, November 1960
- Lee, D. W.; Kingery, W. D.
- Journal of the American Ceramic Society, Vol. 43, Issue 11
In situ reactor radiation-induced attenuation in sapphire optical fibers heated up to 1000 °C
journal, January 2015
- Petrie, Christian M.; Blue, Thomas E.
- Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, Vol. 342
Performance stability of the sapphire fiber and cladding under high temperature
conference, December 1999
- Shen, Yonghang; Tong, Limin; Chen, Shuying
- Photonics East '99, SPIE Proceedings
In Situ Gamma Radiation-Induced Attenuation in Sapphire Optical Fibers Heated to 1000°C
journal, July 2014
- Petrie, Christian M.; Wilson, Brandon; Blue, Thomas E.
- Journal of the American Ceramic Society, Vol. 97, Issue 10
Optical properties of sapphire fiber under high temperature
conference, September 2002
- Ye, Linhua; Shen, Zhongping; Tong, Limin
- Photonics Asia 2002, SPIE Proceedings
In-Situ Reactor Radiation-Induced Attenuation in Sapphire Optical Fibers
journal, September 2014
- Petrie, Christian M.; Windl, Wolfgang; Blue, Thomas E.
- Journal of the American Ceramic Society, Vol. 97, Issue 12
Devitrification in annealed optical fiber
journal, May 1997
- Rose, A. H.
- Journal of Lightwave Technology, Vol. 15, Issue 5
In Situ Thermally Induced Attenuation in Sapphire Optical Fibers Heated to 1400°C
journal, October 2014
- Petrie, Christian M.; Blue, Thomas E.
- Journal of the American Ceramic Society, Vol. 98, Issue 2
Optical and Infrared Properties of Al_2O_3 at Elevated Temperatures*
journal, January 1965
- Gryvnak, David A.; Burch, Darrell E.
- Journal of the Optical Society of America, Vol. 55, Issue 6
Alumina Volatility in Water Vapor at Elevated Temperatures
journal, September 2004
- Opila, Elizabeth J.; Myers, Dwight L.
- Journal of the American Ceramic Society, Vol. 87, Issue 9
Scattering effects in crystalline infrared fibers
journal, January 1988
- Sa’ar, A.; Katzir, A.
- Journal of the Optical Society of America A, Vol. 5, Issue 6
Works referencing / citing this record:
Embedded metallized optical fibers for high temperature applications
journal, April 2019
- Petrie, Christian M.; Sridharan, Niyanth; Subramanian, Mohan
- Smart Materials and Structures, Vol. 28, Issue 5
High-temperature strain monitoring of stainless steel using fiber optics embedded in ultrasonically consolidated nickel layers
journal, July 2019
- Petrie, Christian M.; Sridharan, Niyanth; Hehr, Adam
- Smart Materials and Structures, Vol. 28, Issue 8
Tailoring the nanostructure of anodic aluminum oxide cladding on optical fiber
journal, June 2018
- Liu, Kai; Ma, Yiwei; Du, Henry
- Journal of the American Ceramic Society, Vol. 101, Issue 12
Nanostructured sapphire optical fiber embedded with Au nanorods for high-temperature plasmonics in harsh environments
journal, January 2019
- Liu, Kai; Wuenschell, Jeffrey; Bera, Subhabrata
- Optics Express, Vol. 27, Issue 26
Figures / Tables found in this record: