Hydrogen desorption using honeycomb finned heat exchangers integrated in adsorbent storage systems
Abstract
One of the main technical hurdles associated with adsorbent based hydrogen storage systems is relative to their ability to discharge hydrogen effectively, as dictated by fuel cell requirements. In this study, a new honeycomb finned heat exchanger concept was examined to evaluate its potential as a heat transfer system for hydrogen desorption. A bench scale 0.5 L vessel was equipped with the proposed heat exchanger, filled with MOF-5® adsorbent material. The heating power, required to desorb hydrogen, was provided by a 100 W electric heater placed in the center of the honeycomb structure. Two desorption tests, at room temperature and under cryogenic temperatures, were carried out to evaluate the hydrogen desorption performance of the proposed system under different operating conditions. The bench scale vessel performance was verified from both an experimental and a modeling point of view, demonstrating the ability to desorb about 45% of the adsorbed hydrogen in reduced time and applying low heating power. Further modeling analyses were also carried out showing the potential of the proposed system to reach high hydrogen discharging rates at cryogenic temperature conditions and operating pressures between 100 bar and 5 bar. The proposed adsorption system also demonstrated to be able to dischargemore »
- Authors:
-
- Savannah River Site (SRS), Aiken, SC (United States); Greenway Energy LLC, Aiken, SC (United States)
- Savannah River Site (SRS), Aiken, SC (United States)
- Univ. of Quebec a Trois-Rivieres, QC (Canada). Hydrogen Research Inst.
- Publication Date:
- Research Org.:
- Savannah River Site (SRS), Aiken, SC (United States)
- Sponsoring Org.:
- USDOE Office of Energy Efficiency and Renewable Energy (EERE)
- OSTI Identifier:
- 1426656
- Report Number(s):
- SRNL-STI-2018-00027
Journal ID: ISSN 0306-2619; PII: S0306261918300035; TRN: US1802446
- Grant/Contract Number:
- AC09-08SR22470
- Resource Type:
- Accepted Manuscript
- Journal Name:
- Applied Energy
- Additional Journal Information:
- Journal Volume: 213; Journal Issue: C; Journal ID: ISSN 0306-2619
- Publisher:
- Elsevier
- Country of Publication:
- United States
- Language:
- English
- Subject:
- 25 ENERGY STORAGE; 30 DIRECT ENERGY CONVERSION; 71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSICS; Hydrogen storage; Adsorbents; Finned heat exchanger; Transport models; Experiments
Citation Formats
Corgnale, Claudio, Hardy, Bruce, Chahine, Richard, and Cossement, Daniel. Hydrogen desorption using honeycomb finned heat exchangers integrated in adsorbent storage systems. United States: N. p., 2018.
Web. doi:10.1016/j.apenergy.2018.01.003.
Corgnale, Claudio, Hardy, Bruce, Chahine, Richard, & Cossement, Daniel. Hydrogen desorption using honeycomb finned heat exchangers integrated in adsorbent storage systems. United States. https://doi.org/10.1016/j.apenergy.2018.01.003
Corgnale, Claudio, Hardy, Bruce, Chahine, Richard, and Cossement, Daniel. Thu .
"Hydrogen desorption using honeycomb finned heat exchangers integrated in adsorbent storage systems". United States. https://doi.org/10.1016/j.apenergy.2018.01.003. https://www.osti.gov/servlets/purl/1426656.
@article{osti_1426656,
title = {Hydrogen desorption using honeycomb finned heat exchangers integrated in adsorbent storage systems},
author = {Corgnale, Claudio and Hardy, Bruce and Chahine, Richard and Cossement, Daniel},
abstractNote = {One of the main technical hurdles associated with adsorbent based hydrogen storage systems is relative to their ability to discharge hydrogen effectively, as dictated by fuel cell requirements. In this study, a new honeycomb finned heat exchanger concept was examined to evaluate its potential as a heat transfer system for hydrogen desorption. A bench scale 0.5 L vessel was equipped with the proposed heat exchanger, filled with MOF-5® adsorbent material. The heating power, required to desorb hydrogen, was provided by a 100 W electric heater placed in the center of the honeycomb structure. Two desorption tests, at room temperature and under cryogenic temperatures, were carried out to evaluate the hydrogen desorption performance of the proposed system under different operating conditions. The bench scale vessel performance was verified from both an experimental and a modeling point of view, demonstrating the ability to desorb about 45% of the adsorbed hydrogen in reduced time and applying low heating power. Further modeling analyses were also carried out showing the potential of the proposed system to reach high hydrogen discharging rates at cryogenic temperature conditions and operating pressures between 100 bar and 5 bar. The proposed adsorption system also demonstrated to be able to discharge all the available hydrogen in less than 500 s operating at cryogenic conditions and with a nominal heating power of 100 W.},
doi = {10.1016/j.apenergy.2018.01.003},
journal = {Applied Energy},
number = C,
volume = 213,
place = {United States},
year = {Thu Mar 01 00:00:00 EST 2018},
month = {Thu Mar 01 00:00:00 EST 2018}
}
Search WorldCat to find libraries that may hold this journalWeb of Science