In Situ Neutron Diffraction Study of the Influence of Microstructure on the Mechanical Response of Additively Manufactured 304L Stainless Steel
- Authors:
-
- Los Alamos National Lab. (LANL), Los Alamos, NM (United States)
- Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
- Canadian Nuclear Laboratories, Chalk River (Canada)
- Pennsylvania State Univ., University Park, PA (United States)
- Sandia National Lab. (SNL-CA), Livermore, CA (United States)
- Publication Date:
- Research Org.:
- Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Sandia National Lab. (SNL-CA), Livermore, CA (United States); Los Alamos National Laboratory (LANL), Los Alamos, NM (United States)
- Sponsoring Org.:
- USDOE National Nuclear Security Administration (NNSA); USDOE Laboratory Directed Research and Development (LDRD) Program
- OSTI Identifier:
- 1411620
- Alternate Identifier(s):
- OSTI ID: 1429998
- Report Number(s):
- SAND-2017-2935J; LA-UR-17-22138
Journal ID: ISSN 1073-5623; PII: 4330; TRN: US1800256
- Grant/Contract Number:
- AC04-94AL85000; AC52-06NA25396
- Resource Type:
- Accepted Manuscript
- Journal Name:
- Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science
- Additional Journal Information:
- Journal Volume: 48; Journal Issue: 12; Journal ID: ISSN 1073-5623
- Publisher:
- ASM International
- Country of Publication:
- United States
- Language:
- English
- Subject:
- 36 MATERIALS SCIENCE; 42 ENGINEERING; additive manufacture, Neutron diffraction
Citation Formats
Brown, D. W., Adams, D. P., Balogh, L., Carpenter, J. S., Clausen, B., King, G., Reedlunn, B., Palmer, T. A., Maguire, M. C., and Vogel, S. C. In Situ Neutron Diffraction Study of the Influence of Microstructure on the Mechanical Response of Additively Manufactured 304L Stainless Steel. United States: N. p., 2017.
Web. doi:10.1007/s11661-017-4330-4.
Brown, D. W., Adams, D. P., Balogh, L., Carpenter, J. S., Clausen, B., King, G., Reedlunn, B., Palmer, T. A., Maguire, M. C., & Vogel, S. C. In Situ Neutron Diffraction Study of the Influence of Microstructure on the Mechanical Response of Additively Manufactured 304L Stainless Steel. United States. https://doi.org/10.1007/s11661-017-4330-4
Brown, D. W., Adams, D. P., Balogh, L., Carpenter, J. S., Clausen, B., King, G., Reedlunn, B., Palmer, T. A., Maguire, M. C., and Vogel, S. C. Tue .
"In Situ Neutron Diffraction Study of the Influence of Microstructure on the Mechanical Response of Additively Manufactured 304L Stainless Steel". United States. https://doi.org/10.1007/s11661-017-4330-4. https://www.osti.gov/servlets/purl/1411620.
@article{osti_1411620,
title = {In Situ Neutron Diffraction Study of the Influence of Microstructure on the Mechanical Response of Additively Manufactured 304L Stainless Steel},
author = {Brown, D. W. and Adams, D. P. and Balogh, L. and Carpenter, J. S. and Clausen, B. and King, G. and Reedlunn, B. and Palmer, T. A. and Maguire, M. C. and Vogel, S. C.},
abstractNote = {},
doi = {10.1007/s11661-017-4330-4},
journal = {Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science},
number = 12,
volume = 48,
place = {United States},
year = {Tue Oct 10 00:00:00 EDT 2017},
month = {Tue Oct 10 00:00:00 EDT 2017}
}
Free Publicly Available Full Text
Publisher's Version of Record
Other availability
Search WorldCat to find libraries that may hold this journal
Save to My Library
You must Sign In or Create an Account in order to save documents to your library.
Works referenced in this record:
Influence of microstructure on mechanical properties of laser metal wire-deposited Ti-6Al-4V
journal, September 2016
- Åkerfeldt, Pia; Antti, Marta-Lena; Pederson, Robert
- Materials Science and Engineering: A, Vol. 674
Thermal Expansion
book, January 1975
- Touloukian, Y. S.; Kirby, R. K.; Taylor, R. E.
- Thermophysical Properties of Matter - the TPRC Data Series., Vol. 12
Neutron-diffraction measurements of stress
journal, August 1995
- Holden, T. M.; Root, J. H.; Holt, R. A.
- Physica B: Condensed Matter, Vol. 213-214
Modeling lattice strain evolution at finite strains and experimental verification for copper and stainless steel using in situ neutron diffraction
journal, December 2010
- Neil, C. J.; Wollmershauser, J. A.; Clausen, B.
- International Journal of Plasticity, Vol. 26, Issue 12
Crystallite size distribution and dislocation structure determined by diffraction profile analysis: principles and practical application to cubic and hexagonal crystals
journal, May 2001
- Ungár, T.; Gubicza, J.; Ribárik, G.
- Journal of Applied Crystallography, Vol. 34, Issue 3
Study of the mechanical properties of Mg-7.7at.% Al by in-situ neutron diffraction
journal, July 1999
- Gharghouri, M. A.; Weatherly, G. C.; Embury, J. D.
- Philosophical Magazine A, Vol. 79, Issue 7
Neutron diffraction measurement of residual stresses, dislocation density and texture in Zr-bonded U-10Mo “mini” fuel foils and plates
journal, December 2016
- Brown, D. W.; Okuniewski, M. A.; Sisneros, T. A.
- Journal of Nuclear Materials, Vol. 482
Temperature and direction dependence of internal strain and texture evolution during deformation of uranium
journal, June 2009
- Brown, D. W.; Bourke, M. A. M.; Clausen, B.
- Materials Science and Engineering: A, Vol. 512, Issue 1-2
Monocrystal-Polycrystal Elastic Constants of a Stainless Steel
journal, September 1984
- Ledbetter, H. M.
- Physica Status Solidi (a), Vol. 85, Issue 1
Laser additive manufacturing of metallic components: materials, processes and mechanisms
journal, May 2012
- Gu, D. D.; Meiners, W.; Wissenbach, K.
- International Materials Reviews, Vol. 57, Issue 3, p. 133-164
Study of slip mechanisms in a magnesium alloy by neutron diffraction and modeling
journal, April 2003
- Agnew, S. R.; Tomé, C. N.; Brown, D. W.
- Scripta Materialia, Vol. 48, Issue 8
The Measurement of Residual Stresses Using Neutron Diffraction
journal, November 1990
- Krawitz, Aaron D.; Holden, Thomas M.
- MRS Bulletin, Vol. 15, Issue 11
The determination of a continuum mechanics equivalent elastic strain from the analysis of multiple diffraction peaks
journal, October 2004
- Daymond, Mark R.
- Journal of Applied Physics, Vol. 96, Issue 8
Quantitative texture analysis by Rietveld refinement
journal, August 1997
- Von Dreele, R. B.
- Journal of Applied Crystallography, Vol. 30, Issue 4
The determination of density and distribution of dislocations in deformed single crystals from broadened X-ray diffraction profiles
journal, June 1970
- Wilkens, M.
- Physica Status Solidi (a), Vol. 2, Issue 2
Lattice strain evolution during uniaxial tensile loading of stainless steel
journal, January 1999
- Clausen, Bjørn; Lorentzen, Torben; Bourke, Mark A. M.
- Materials Science and Engineering: A, Vol. 259, Issue 1
The Deformation and Ageing of Mild Steel: III Discussion of Results
journal, September 1951
- Hall, E. O.
- Proceedings of the Physical Society. Section B, Vol. 64, Issue 9
On the relationship between uniaxial yield strength and resolved shear stress in polycrystalline materials
journal, December 2000
- Stoller, R. E.; Zinkle, S. J.
- Journal of Nuclear Materials, Vol. 283-287
SMARTS - a spectrometer for strain measurement in engineering materials
journal, December 2002
- Bourke, M. A. M.; Dunand, D. C.; Ustundag, E.
- Applied Physics A: Materials Science & Processing, Vol. 74, Issue 0
Intergranular strains in Inconel-600 and the impact on interpreting stress fields in bent steam-generator tubing
journal, May 1998
- Holden, T. M.; Holt, R. A.; Clarke, A. P.
- Materials Science and Engineering: A, Vol. 246, Issue 1-2
Overview: high-nitrogen alloying of stainless steels
journal, March 1996
- Simmons, J. W.
- Materials Science and Engineering: A, Vol. 207, Issue 2, p. 159-169
Role of twinning and slip during compressive deformation of beryllium as a function of strain rate
journal, February 2012
- Brown, D. W.; Beyerlein, I. J.; Sisneros, T. A.
- International Journal of Plasticity, Vol. 29
Dislocation structure evolution induced by irradiation and plastic deformation in the Zr–2.5Nb nuclear structural material determined by neutron diffraction line profile analysis
journal, September 2012
- Balogh, Levente; Brown, Donald W.; Mosbrucker, Paula
- Acta Materialia, Vol. 60, Issue 15
The crystallography and deformation modes of hexagonal close-packed metals
journal, January 1967
- Partridge, P. G.
- International Materials Reviews, Vol. 12, Issue 1
Effect of processing parameters on microstructure and tensile properties of austenitic stainless steel 304L made by directed energy deposition additive manufacturing
journal, May 2016
- Wang, Zhuqing; Palmer, Todd A.; Beese, Allison M.
- Acta Materialia, Vol. 110
Strain hardening at different temperatures
journal, January 2009
- Cottrell, A.
- Philosophical Magazine Letters, Vol. 89, Issue 1
Rietveld texture analysis from TOF neutron diffraction data
journal, September 2010
- Wenk, H. -R.; Lutterotti, L.; Vogel, S. C.
- Powder Diffraction, Vol. 25, Issue 3
Use of Rietveld refinement for elastic macrostrain determination and for evaluation of plastic strain history from diffraction spectra
journal, August 1997
- Daymond, M. R.; Bourke, M. A. M.; Von Dreele, R. B.
- Journal of Applied Physics, Vol. 82, Issue 4
Measured and predicted intergranular strains in textured austenitic steel
journal, January 2000
- Daymond, M. R.; Tomé, C. N.; Bourke, M. A. M.
- Acta Materialia, Vol. 48, Issue 2
Anisotropic tensile behavior of Ti–6Al–4V components fabricated with directed energy deposition additive manufacturing
journal, April 2015
- Carroll, Beth E.; Palmer, Todd A.; Beese, Allison M.
- Acta Materialia, Vol. 87
Combined texture and structure analysis of deformed limestone from time-of-flight neutron diffraction spectra
journal, January 1997
- Lutterotti, L.; Matthies, S.; Wenk, H. -R.
- Journal of Applied Physics, Vol. 81, Issue 2
Correlation between strength and microstructure of ball-milled Al–Mg alloys determined by X-ray diffraction
journal, December 2004
- Ribárik, G.; Gubicza, J.; Ungár, T.
- Materials Science and Engineering: A, Vol. 387-389
Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges
journal, December 2015
- King, W. E.; Anderson, A. T.; Ferencz, R. M.
- Applied Physics Reviews, Vol. 2, Issue 4
Texture analysis with the new HIPPO TOF diffractometer
journal, December 2003
- Wenk, H. -R.; Lutterotti, L.; Vogel, S.
- Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, Vol. 515, Issue 3
Characterization of residual stresses in bent incoloy-800 tubing by neutron diffraction
journal, September 1988
- Holden, T. M.; Dolling, G.; Powell, B. M.
- Metallurgical Transactions A, Vol. 19, Issue 9
Correlation between subgrains and coherently scattering domains
journal, December 2005
- Ungár, T.; Tichy, G.; Gubicza, J.
- Powder Diffraction, Vol. 20, Issue 4
Works referencing / citing this record:
A comparison of adiabatic shear bands in wrought and additively manufactured 316L stainless steel using nanoindentation and electron backscatter diffraction
journal, September 2019
- Weaver, Jordan S.; Livescu, Veronica; Mara, Nathan A.
- Journal of Materials Science, Vol. 55, Issue 4
Development of Intergranular Residual Stress and Its Implication to Mechanical Behaviors at Elevated Temperatures in AL6XN Austenitic Stainless Steel
journal, May 2018
- Hong, Yanyan; Li, Shilei; Li, Hongjia
- Metallurgical and Materials Transactions A, Vol. 49, Issue 8
Microscale residual stresses in additively manufactured stainless steel
journal, September 2019
- Chen, Wen; Voisin, Thomas; Zhang, Yin
- Nature Communications, Vol. 10, Issue 1