Micro-mechanical evaluation of SiC-SiC composite interphase properties and debond mechanisms
Abstract
SiC-SiC composites exhibit exceptional high temperature strength and oxidation properties making them an advantageous choice for accident tolerant nuclear fuel cladding. In the present work, small scale mechanical testing along with AFM and TEM analysis were employed to evaluate PyC interphase properties that play a key role in the overall mechanical behavior of the composite. The Mohr-Coulomb formulation allowed for the extraction of the internal friction coefficient and debonding shear strength as a function of the PyC layer thickness, an additional parameter. Here, these results have led to re-evaluation of the Mohr-Coulomb failure criterion and adjustment via a new phenomenological equation.
- Authors:
-
- Univ. of California, Berkeley, CA (United States)
- Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Univ. of California, Berkeley, CA (United States)
- Publication Date:
- Research Org.:
- Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)
- Sponsoring Org.:
- USDOE Office of Nuclear Energy (NE)
- OSTI Identifier:
- 1399553
- Alternate Identifier(s):
- OSTI ID: 1496393
- Grant/Contract Number:
- AC05-00OR22725
- Resource Type:
- Accepted Manuscript
- Journal Name:
- Composites. Part B, Engineering
- Additional Journal Information:
- Journal Volume: 131; Journal Issue: C; Journal ID: ISSN 1359-8368
- Publisher:
- Elsevier
- Country of Publication:
- United States
- Language:
- English
- Subject:
- 36 MATERIALS SCIENCE; SiC-SiC; Nuclear; Composites; Pyrolytic carbon (PyC); Interphase; Interface; Micro-mechanical; Small scale mechanical testing (SSMT); Micro-pillar compression
Citation Formats
Kabel, Joey, Yang, Y., Balooch, Mehdi, Howard, C., Koyanagi, Takaaki, Terrani, Kurt A., Katoh, Yutai, and Hosemann, P. Micro-mechanical evaluation of SiC-SiC composite interphase properties and debond mechanisms. United States: N. p., 2017.
Web. doi:10.1016/j.compositesb.2017.07.035.
Kabel, Joey, Yang, Y., Balooch, Mehdi, Howard, C., Koyanagi, Takaaki, Terrani, Kurt A., Katoh, Yutai, & Hosemann, P. Micro-mechanical evaluation of SiC-SiC composite interphase properties and debond mechanisms. United States. https://doi.org/10.1016/j.compositesb.2017.07.035
Kabel, Joey, Yang, Y., Balooch, Mehdi, Howard, C., Koyanagi, Takaaki, Terrani, Kurt A., Katoh, Yutai, and Hosemann, P. Mon .
"Micro-mechanical evaluation of SiC-SiC composite interphase properties and debond mechanisms". United States. https://doi.org/10.1016/j.compositesb.2017.07.035. https://www.osti.gov/servlets/purl/1399553.
@article{osti_1399553,
title = {Micro-mechanical evaluation of SiC-SiC composite interphase properties and debond mechanisms},
author = {Kabel, Joey and Yang, Y. and Balooch, Mehdi and Howard, C. and Koyanagi, Takaaki and Terrani, Kurt A. and Katoh, Yutai and Hosemann, P.},
abstractNote = {SiC-SiC composites exhibit exceptional high temperature strength and oxidation properties making them an advantageous choice for accident tolerant nuclear fuel cladding. In the present work, small scale mechanical testing along with AFM and TEM analysis were employed to evaluate PyC interphase properties that play a key role in the overall mechanical behavior of the composite. The Mohr-Coulomb formulation allowed for the extraction of the internal friction coefficient and debonding shear strength as a function of the PyC layer thickness, an additional parameter. Here, these results have led to re-evaluation of the Mohr-Coulomb failure criterion and adjustment via a new phenomenological equation.},
doi = {10.1016/j.compositesb.2017.07.035},
journal = {Composites. Part B, Engineering},
number = C,
volume = 131,
place = {United States},
year = {Mon Jul 31 00:00:00 EDT 2017},
month = {Mon Jul 31 00:00:00 EDT 2017}
}
Web of Science
Works referenced in this record:
Silicon carbide composite for light water reactor fuel assembly applications
journal, May 2014
- Yueh, Ken; Terrani, Kurt A.
- Journal of Nuclear Materials, Vol. 448, Issue 1-3
Silicon carbide composites as fusion power reactor structural materials
journal, October 2011
- Snead, L. L.; Nozawa, T.; Ferraris, M.
- Journal of Nuclear Materials, Vol. 417, Issue 1-3
Radiation effects in SiC for nuclear structural applications
journal, June 2012
- Katoh, Yutai; Snead, Lance L.; Szlufarska, Izabela
- Current Opinion in Solid State and Materials Science, Vol. 16, Issue 3
SiC-Matrix Composite Materials for Advanced Jet Engines
journal, September 2003
- Naslain, R.; Christin, F.
- MRS Bulletin, Vol. 28, Issue 9
High-velocity impact damage behavior of plain-woven SiC/SiC composites after thermal loading
journal, April 2012
- Yashiro, Shigeki; Ogi, Keiji; Oshita, Masashi
- Composites Part B: Engineering, Vol. 43, Issue 3
Probabilistic analysis of a SiC/SiC ceramic matrix composite turbine vane
journal, June 2008
- Murthy, Pappu L. N.; Nemeth, Noel N.; Brewer, David N.
- Composites Part B: Engineering, Vol. 39, Issue 4
Selection of fuel cladding material for nuclear fission reactors
journal, December 2011
- Azevedo, C. R. F.
- Engineering Failure Analysis, Vol. 18, Issue 8
Accident tolerant fuels for LWRs: A perspective
journal, May 2014
- Zinkle, S. J.; Terrani, K. A.; Gehin, J. C.
- Journal of Nuclear Materials, Vol. 448, Issue 1-3
Kinetics and Mechanisms of High-Temperature Creep in Silicon Carbide: II, Chemically Vapor Deposited
journal, November 1984
- Carter, C. H.; Davis, R. F.; Bentley, J.
- Journal of the American Ceramic Society, Vol. 67, Issue 11
Innovative composite materials research at the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy
journal, January 1994
- Sorrell, Charles A.; Hoffman, Patricia A.
- Composites Engineering, Vol. 4, Issue 8
Silicon Carbide Oxidation in Steam up to 2 MPa
journal, July 2014
- Terrani, Kurt A.; Pint, Bruce A.; Parish, Chad M.
- Journal of the American Ceramic Society, Vol. 97, Issue 8
Handbook of SiC properties for fuel performance modeling
journal, September 2007
- Snead, Lance L.; Nozawa, Takashi; Katoh, Yutai
- Journal of Nuclear Materials, Vol. 371, Issue 1-3
Current status and recent research achievements in SiC/SiC composites
journal, December 2014
- Katoh, Y.; Snead, L. L.; Henager, C. H.
- Journal of Nuclear Materials, Vol. 455, Issue 1-3
Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview
journal, February 2004
- Naslain, R.
- Composites Science and Technology, Vol. 64, Issue 2
Evaluation of neutron irradiated silicon carbide and silicon carbide composites
journal, September 2007
- Newsome, George; Snead, Lance L.; Hinoki, Tatsuya
- Journal of Nuclear Materials, Vol. 371, Issue 1-3
The effect of neutron irradiation on the fiber/matrix interphase of silicon carbide composites
journal, February 2009
- Nozawa, T.; Katoh, Y.; Snead, L. L.
- Journal of Nuclear Materials, Vol. 384, Issue 3
Continuous SiC fiber, CVI SiC matrix composites for nuclear applications: Properties and irradiation effects
journal, May 2014
- Katoh, Yutai; Ozawa, Kazumi; Shih, Chunghao
- Journal of Nuclear Materials, Vol. 448, Issue 1-3
The physics and mechanics of fibre-reinforced brittle matrix composites
journal, August 1994
- Evans, A. G.; Zok, F. W.
- Journal of Materials Science, Vol. 29, Issue 15
On the micromechanical failure modes in a class of ideal brittle matrix composites. Part 1. Coated-fiber composites
journal, January 1998
- Pagano, N. J.
- Composites Part B: Engineering, Vol. 29, Issue 2
Localized mechanical property assessment of SiC/SiC composite materials
journal, March 2015
- Frazer, D.; Abad, M. D.; Krumwiede, D.
- Composites Part A: Applied Science and Manufacturing, Vol. 70
Single fiber push-out characterization of interfacial mechanical properties in unidirectional CVI-C/SiC composites by the nano-indentation technique
journal, December 2015
- Zhang, Lifeng; Ren, Chengzu; Zhou, Changling
- Applied Surface Science, Vol. 357
Determination of interfacial mechanical properties of ceramic composites by the compression of micro-pillar test specimens
journal, March 2013
- Shih, Chunghao; Katoh, Yutai; Leonard, Keith J.
- Journal of Materials Science, Vol. 48, Issue 15
Tensile Creep Behavior of SiC-Based Fibers With a Low Oxygen Content
journal, April 2007
- Sauder, Cédric; Lamon, Jacques
- Journal of the American Ceramic Society, Vol. 90, Issue 4
Influence of Interface Characteristics on the Mechanical Properties of Hi-Nicalon type-S or Tyranno-SA3 Fiber-Reinforced SiC/SiC Minicomposites: Influence of Interface Characteristics on the Mechanical Properties
journal, February 2010
- Sauder, C.; Brusson, A.; Lamon, J.
- International Journal of Applied Ceramic Technology, Vol. 7, Issue 3
Thermophysical and mechanical properties of near-stoichiometric fiber CVI SiC/SiC composites after neutron irradiation at elevated temperatures
journal, August 2010
- Katoh, Yutai; Snead, Lance L.; Nozawa, Takashi
- Journal of Nuclear Materials, Vol. 403, Issue 1-3
Discussion of the dependence of the effect of size on the yield stress in hard materials studied by microcompression of MgO
journal, March 2011
- Korte, S.; Clegg, W. J.
- Philosophical Magazine, Vol. 91, Issue 7-9
Mechanical Properties and Deformation of Cubic Silicon Carbide Micropillars in Compression at Room Temperature
journal, July 2012
- Shin, Chansun; Jin, Hyung-Ha; Kim, Weon-Ju
- Journal of the American Ceramic Society, Vol. 95, Issue 9
Scale effects for strength, ductility, and toughness in “brittle” materials
journal, March 2009
- Gerberich, W. W.; Michler, J.; Mook, W. M.
- Journal of Materials Research, Vol. 24, Issue 3
Brittle-to-Ductile Transition in Uniaxial Compression of Silicon Pillars at Room Temperature
journal, August 2009
- Östlund, Fredrik; Rzepiejewska-Malyska, Karolina; Leifer, Klaus
- Advanced Functional Materials, Vol. 19, Issue 15
Microstructural evolution of nuclear grade graphite induced by ion irradiation at high temperature environment
journal, March 2013
- Tsai, Shuo-Cheng; Huang, E-Wen; Kai, Ji-Jung
- Journal of Nuclear Materials, Vol. 434, Issue 1-3
Heterogeneous diamond phases in compressed graphite studied by electron energy-loss spectroscopy
journal, April 2016
- Sato, Yohei; Bugnet, Matthieu; Terauchi, Masami
- Diamond and Related Materials, Vol. 64
The investigation of crack mechanism for Tyranno-SA SiC/SiC composites with ESI method
journal, August 2004
- Yan, J. Y.; Chen, C. W.; Fang, P. C.
- Journal of Nuclear Materials, Vol. 329-333
Mechanical Properties of Thin Pyrolitic Carbon Interphase SiC-Matrix Composites Reinforced with Near-Stoichiometric SiC Fibers
journal, November 2005
- Katoh, Yutai; Nozawa, Takashi; Snead, Lance L.
- Journal of the American Ceramic Society, Vol. 88, Issue 11
Interlayer shear strength of single crystalline graphite
journal, August 2012
- Liu, Ze; Zhang, Shou-Mo; Yang, Jia-Rui
- Acta Mechanica Sinica, Vol. 28, Issue 4
Works referencing / citing this record:
A finite fracture model for the analysis of multi-cracking in woven ceramic matrix composites
journal, April 2018
- Li, J.; Martin, E.; Leguillon, D.
- Composites Part B: Engineering, Vol. 139