Multipole-Based Cable Braid Electromagnetic Penetration Model: Electric Penetration Case
Abstract
In this paper, we investigate the electric penetration case of the first principles multipole-based cable braid electromagnetic penetration model reported in the Progress in Electromagnetics Research B 66, 63–89 (2016). We first analyze the case of a 1-D array of wires: this is a problem which is interesting on its own, and we report its modeling based on a multipole-conformal mapping expansion and extension by means of Laplace solutions in bipolar coordinates. We then compare the elastance (inverse of capacitance) results from our first principles cable braid electromagnetic penetration model to that obtained using the multipole-conformal mapping bipolar solution. These results are found in a good agreement up to a radius to half spacing ratio of 0.6, demonstrating a robustness needed for many commercial cables. We then analyze realistic cable implementations without dielectrics and compare the results from our first principles braid electromagnetic penetration model to the semiempirical results reported by Kley in the IEEE Transactions on Electromagnetic Compatibility 35, 1–9 (1993). Finally, although we find results on the same order of magnitude of Kley's results, the full dependence on the actual cable geometry is accounted for only in our proposed multipole model which, in addition, enables us to treatmore »
- Authors:
-
- Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
- Publication Date:
- Research Org.:
- Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
- Sponsoring Org.:
- USDOE National Nuclear Security Administration (NNSA)
- OSTI Identifier:
- 1399489
- Report Number(s):
- SAND-2017-0858J
Journal ID: ISSN 0018-9375; 650752
- Grant/Contract Number:
- NA0003525
- Resource Type:
- Accepted Manuscript
- Journal Name:
- IEEE Transactions on Electromagnetic Compatibility
- Additional Journal Information:
- Journal Volume: 60; Journal Issue: 2; Journal ID: ISSN 0018-9375
- Publisher:
- IEEE
- Country of Publication:
- United States
- Language:
- English
- Subject:
- 42 ENGINEERING; wires; cable shielding; electric potential; capacitance; analytical models; laboratories; cable braid; electric penetration; first principles electromagnetic penetration model
Citation Formats
Campione, Salvatore, Warne, Larry K., Langston, William L., Johnson, William A., Coats, Rebecca S., and Basilio, Lorena I. Multipole-Based Cable Braid Electromagnetic Penetration Model: Electric Penetration Case. United States: N. p., 2017.
Web. doi:10.1109/temc.2017.2721101.
Campione, Salvatore, Warne, Larry K., Langston, William L., Johnson, William A., Coats, Rebecca S., & Basilio, Lorena I. Multipole-Based Cable Braid Electromagnetic Penetration Model: Electric Penetration Case. United States. https://doi.org/10.1109/temc.2017.2721101
Campione, Salvatore, Warne, Larry K., Langston, William L., Johnson, William A., Coats, Rebecca S., and Basilio, Lorena I. Tue .
"Multipole-Based Cable Braid Electromagnetic Penetration Model: Electric Penetration Case". United States. https://doi.org/10.1109/temc.2017.2721101. https://www.osti.gov/servlets/purl/1399489.
@article{osti_1399489,
title = {Multipole-Based Cable Braid Electromagnetic Penetration Model: Electric Penetration Case},
author = {Campione, Salvatore and Warne, Larry K. and Langston, William L. and Johnson, William A. and Coats, Rebecca S. and Basilio, Lorena I.},
abstractNote = {In this paper, we investigate the electric penetration case of the first principles multipole-based cable braid electromagnetic penetration model reported in the Progress in Electromagnetics Research B 66, 63–89 (2016). We first analyze the case of a 1-D array of wires: this is a problem which is interesting on its own, and we report its modeling based on a multipole-conformal mapping expansion and extension by means of Laplace solutions in bipolar coordinates. We then compare the elastance (inverse of capacitance) results from our first principles cable braid electromagnetic penetration model to that obtained using the multipole-conformal mapping bipolar solution. These results are found in a good agreement up to a radius to half spacing ratio of 0.6, demonstrating a robustness needed for many commercial cables. We then analyze realistic cable implementations without dielectrics and compare the results from our first principles braid electromagnetic penetration model to the semiempirical results reported by Kley in the IEEE Transactions on Electromagnetic Compatibility 35, 1–9 (1993). Finally, although we find results on the same order of magnitude of Kley's results, the full dependence on the actual cable geometry is accounted for only in our proposed multipole model which, in addition, enables us to treat perturbations from those commercial cables measured.},
doi = {10.1109/temc.2017.2721101},
journal = {IEEE Transactions on Electromagnetic Compatibility},
number = 2,
volume = 60,
place = {United States},
year = {Tue Jul 11 00:00:00 EDT 2017},
month = {Tue Jul 11 00:00:00 EDT 2017}
}
Web of Science