Mechanism of the Bauschinger effect in Al-Ge-Si alloys
Abstract
Here, wrought Al-Ge-Si alloys were designed and produced to ensure dislocation bypass strengthening ("hard pin" precipitates) without significant precipitate cutting/shearing ("soft pin" precipitates). They were processed from the melt, solution heat treated and aged.
- Authors:
-
- Medtronic, Mounds View, MN (United States)
- The Ohio State Univ., Columbus, OH (United States)
- Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
- Simulia Central Region, West Chester, OH (United States)
- Pohang Univ. of Science and Technology, Gyeongbuk (Korea, Republic of)
- Publication Date:
- Research Org.:
- Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
- Sponsoring Org.:
- USDOE National Nuclear Security Administration (NNSA)
- OSTI Identifier:
- 1333673
- Alternate Identifier(s):
- OSTI ID: 1419122
- Report Number(s):
- SAND-2016-8110J
Journal ID: ISSN 0921-5093; 646771
- Grant/Contract Number:
- AC04-94AL85000
- Resource Type:
- Accepted Manuscript
- Journal Name:
- Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing
- Additional Journal Information:
- Journal Volume: 684; Journal ID: ISSN 0921-5093
- Publisher:
- Elsevier
- Country of Publication:
- United States
- Language:
- English
- Subject:
- 36 MATERIALS SCIENCE
Citation Formats
Gan, Wei, Bong, Hyuk Jong, Lim, Hojun, Boger, R. K., Barlat, F., and Wagoner, R. H. Mechanism of the Bauschinger effect in Al-Ge-Si alloys. United States: N. p., 2016.
Web. doi:10.1016/j.msea.2016.12.020.
Gan, Wei, Bong, Hyuk Jong, Lim, Hojun, Boger, R. K., Barlat, F., & Wagoner, R. H. Mechanism of the Bauschinger effect in Al-Ge-Si alloys. United States. https://doi.org/10.1016/j.msea.2016.12.020
Gan, Wei, Bong, Hyuk Jong, Lim, Hojun, Boger, R. K., Barlat, F., and Wagoner, R. H. Wed .
"Mechanism of the Bauschinger effect in Al-Ge-Si alloys". United States. https://doi.org/10.1016/j.msea.2016.12.020. https://www.osti.gov/servlets/purl/1333673.
@article{osti_1333673,
title = {Mechanism of the Bauschinger effect in Al-Ge-Si alloys},
author = {Gan, Wei and Bong, Hyuk Jong and Lim, Hojun and Boger, R. K. and Barlat, F. and Wagoner, R. H.},
abstractNote = {Here, wrought Al-Ge-Si alloys were designed and produced to ensure dislocation bypass strengthening ("hard pin" precipitates) without significant precipitate cutting/shearing ("soft pin" precipitates). They were processed from the melt, solution heat treated and aged.},
doi = {10.1016/j.msea.2016.12.020},
journal = {Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing},
number = ,
volume = 684,
place = {United States},
year = {Wed Dec 07 00:00:00 EST 2016},
month = {Wed Dec 07 00:00:00 EST 2016}
}
Free Publicly Available Full Text
Publisher's Version of Record
Other availability
Search WorldCat to find libraries that may hold this journal
Cited by: 21 works
Citation information provided by
Web of Science
Web of Science
Save to My Library
You must Sign In or Create an Account in order to save documents to your library.
Works referenced in this record:
Anisotropic hardening equations derived from reverse-bend testing
journal, October 2002
- Geng, Lumin; Shen, Yao; Wagoner, R. H.
- International Journal of Plasticity, Vol. 18, Issue 5-6
Role of plastic anisotropy and its evolution on springback
journal, January 2002
- Geng, Lumin; Wagoner, R. H.
- International Journal of Mechanical Sciences, Vol. 44, Issue 1
Extension of quasi-plastic–elastic approach to incorporate complex plastic flow behavior – application to springback of advanced high-strength steels
journal, June 2013
- Lee, Jinwoo; Lee, Jeong-Yeon; Barlat, Frédéric
- International Journal of Plasticity, Vol. 45
An application of homogeneous anisotropic hardening to springback prediction in pre-strained U-draw/bending
journal, December 2012
- Lee, Jeong-Yeon; Lee, Jin-Woo; Lee, Myoung-Gyu
- International Journal of Solids and Structures, Vol. 49, Issue 25
Advanced Issues in springback
journal, June 2013
- Wagoner, Robert H.; Lim, Hojun; Lee, Myoung-Gyu
- International Journal of Plasticity, Vol. 45
Measurement of springback
journal, January 2002
- Carden, W. D.; Geng, L. M.; Matlock, D. K.
- International Journal of Mechanical Sciences, Vol. 44, Issue 1
Simulation of springback
journal, January 2002
- Li, K. P.; Carden, W. P.; Wagoner, R. H.
- International Journal of Mechanical Sciences, Vol. 44, Issue 1
Transient tensile behavior of interstitial-free steel and 70/30 brass following plane-strain deformation
journal, August 1989
- Doucet, A. B.; Wagoner, R. H.
- Metallurgical Transactions A, Vol. 20, Issue 8
Plastic behavior of dual phase steel following plane-strain deformation
journal, March 1985
- Laukonis, J. V.; Wagoner, R. H.
- Metallurgical Transactions A, Vol. 16, Issue 3
Plastic behavior of aluminum-killed steel following plane-strain deformation
journal, July 1983
- Wagoner, R. H.; Laukonis, J. V.
- Metallurgical Transactions A, Vol. 14, Issue 7
Plastic behavior of 70/30 brass sheet
journal, August 1982
- Wagoner, R. H.
- Metallurgical Transactions A, Vol. 13, Issue 8
Implementation and application of a temperature-dependent Chaboche model
journal, December 2015
- Zhou, C.; Chen, Z.; Lee, J. W.
- International Journal of Plasticity, Vol. 75
Variation and consistency of Young’s modulus in steel
journal, January 2016
- Chen, Zhong; Gandhi, Umesh; Lee, Jinwoo
- Journal of Materials Processing Technology, Vol. 227
The elastic–plastic transition of metals
journal, August 2016
- Chen, Zhong; Bong, Hyuk Jong; Li, Dayong
- International Journal of Plasticity, Vol. 83
Complex unloading behavior: Nature of the deformation and its consistent constitutive representation
journal, July 2011
- Sun, Li; Wagoner, R. H.
- International Journal of Plasticity, Vol. 27, Issue 7
The effect of shear-resistant, plate-shaped precipitates on the work hardening of Al alloys: Towards a prediction of the strength–elongation correlation
journal, December 2009
- da Costa Teixeira, J.; Bourgeois, L.; Sinclair, C. W.
- Acta Materialia, Vol. 57, Issue 20
The effect of interrupted aging on the yield strength and uniform elongation of precipitation-hardened Al alloys
journal, September 2013
- Chen, Y.; Weyland, M.; Hutchinson, C. R.
- Acta Materialia, Vol. 61, Issue 15
A modification of Prager’s hardening rule
journal, January 1959
- Ziegler, Hans
- Quarterly of Applied Mathematics, Vol. 17, Issue 1
A study of latent hardening behavior in aluminium single crystals
journal, November 1996
- Mingzhang, Wang; Shi, Lin; Chenghua, Li
- Scripta Materialia, Vol. 35, Issue 10
Effect of reinforcement geometry on matrix stresses in three aluminium metal matrix composite systems
journal, October 2001
- Johannesson, B.; Ogin, S. L.; Surappa, M. K.
- Scripta Materialia, Vol. 45, Issue 8
Isotropic and kinematic hardening in a dispersion-strengthened aluminum alloy
journal, May 1997
- Reynolds, A. P.; Lyons, J. S.
- Metallurgical and Materials Transactions A, Vol. 28, Issue 5
The work-hardening of copper-silica: I. A model based on internal stresses, with no plastic relaxation
journal, May 1971
- Brown, L. M.; Stobbs, W. M.
- Philosophical Magazine, Vol. 23, Issue 185
Bauschinger effect and back stress in a dual phase steel.
journal, January 1989
- Ma, M. T.; Sun, B. Z.; Tomota, Y.
- ISIJ International, Vol. 29, Issue 1
The anisotropy of age-hardened Al-4 pct Cu single crystals during plane-strain compression
journal, January 1972
- Hosford, W. F.; Zeisloft, R. H.
- Metallurgical and Materials Transactions B, Vol. 3, Issue 1
A physically based yield criterion I. Determination of the yield stress based on analysis of pre-yield dislocation behaviour
journal, April 2016
- van Liempt, Peter; Sietsma, Jilt
- Materials Science and Engineering: A, Vol. 662
Viscoplasticity of heterogeneous metallic materials
journal, August 2008
- McDowell, David L.
- Materials Science and Engineering: R: Reports, Vol. 62, Issue 3
Simulated defect growth avalanches during deformation of nanocrystalline copper
journal, February 2013
- Tiwari, Shreevant; Tucker, Garritt J.; McDowell, David L.
- Philosophical Magazine, Vol. 93, Issue 5
Dislocation Bow-Out Model for Yield Stress of Ultra-Fine Grained Materials
journal, January 2008
- Kato, Masaharu; Fujii, Toshiyuki; Onaka, Susumu
- MATERIALS TRANSACTIONS, Vol. 49, Issue 6
Dislocation substructures in mild steel deformed in simple shear
journal, July 1989
- Rauch, E. F.; Schmitt, J. -H
- Materials Science and Engineering: A, Vol. 113
Forward and reverse rearrangements of dislocations in tangled walls
journal, August 1986
- Hasegawa, T.; Yakou, T.; Kocks, U. F.
- Materials Science and Engineering, Vol. 81
Experimental observation of microstructure evolution under strain-path changes in low-carbon IF steel
journal, July 2001
- Nesterova, E. V.; Bacroix, B.; Teodosiu, C.
- Materials Science and Engineering: A, Vol. 309-310
Yield loci for polycrystalline metals without texture
journal, November 1985
- Schmitt, J. H.; Aernoudt, E.; Baudelet, B.
- Materials Science and Engineering, Vol. 75, Issue 1-2
The Flow Law of Mild Steel under Monotonic or Complex Strain Path
journal, January 1992
- Rauch, Edgar F.
- Solid State Phenomena, Vol. 23-24
On the origin of cell walls and of lattice misorientations during deformation
journal, April 1980
- Kocks, U. F.; Hasegawa, T.; Scattergood, R. O.
- Scripta Metallurgica, Vol. 14, Issue 4
Dislocation wall and cell structures and long-range internal stresses in deformed metal crystals
journal, September 1983
- Mughrabi, H.
- Acta Metallurgica, Vol. 31, Issue 9
Influences of cell walls and grain boundaries on transient responses of an if steel to changes in strain path
journal, April 1994
- Wilson, D. V.; Bate, P. S.
- Acta Metallurgica et Materialia, Vol. 42, Issue 4
Directional strain softening in ferritic steel
journal, May 1987
- Strauven, Y.; Aernoudt, E.
- Acta Metallurgica, Vol. 35, Issue 5
Change of Young’s modulus of cold-deformed pure iron in a tensile test
journal, December 2005
- Benito, J. A.; Jorba, J.; Manero, J. M.
- Metallurgical and Materials Transactions A, Vol. 36, Issue 12
Work-hardening behavior of mild steel under stress reversal at large strains
journal, January 1992
- Hu, Zaiqian; Rauch, Edgar Fernand; Teodosiu, Cristian
- International Journal of Plasticity, Vol. 8, Issue 7
Work-hardening/softening behaviour of b.c.c. polycrystals during changing strain paths: I. An integrated model based on substructure and texture evolution, and its prediction of the stress–strain behaviour of an IF steel during two-stage strain paths
journal, May 2001
- Peeters, B.; Seefeldt, M.; Teodosiu, C.
- Acta Materialia, Vol. 49, Issue 9
Work-hardening/softening behaviour of b.c.c. polycrystals during changing strain:
journal, May 2001
- Peeters, B.; Bacroix, B.; Teodosiu, C.
- Acta Materialia, Vol. 49, Issue 9
Modelling of anisotropic work-hardening behaviour of metallic materials subjected to strain-path changes
journal, March 2005
- Bouvier, S.; Alves, J. L.; Oliveira, M. C.
- Computational Materials Science, Vol. 32, Issue 3-4
Sequential modeling of local precipitation, strength and strain hardening in friction stir welds of an aluminum alloy 6005A-T6
journal, October 2007
- Simar, A.; Bréchet, Y.; de Meester, B.
- Acta Materialia, Vol. 55, Issue 18
Microstructure-based modelling of isotropic and kinematic strain hardening in a precipitation-hardened aluminium alloy
journal, May 2011
- Fribourg, G.; Bréchet, Y.; Deschamps, A.
- Acta Materialia, Vol. 59, Issue 9
On the reversibility of dislocation slip during cyclic deformation of Al alloys containing shear-resistant particles
journal, May 2011
- Han, W. Z.; Vinogradov, A.; Hutchinson, C. R.
- Acta Materialia, Vol. 59, Issue 9
Cyclic behaviour of a 6061 aluminium alloy: Coupling precipitation and elastoplastic modelling
journal, January 2015
- Bardel, D.; Perez, M.; Nelias, D.
- Acta Materialia, Vol. 83
A comparison of the mechanical behaviour of an AA1050 and a low carbon steel deformed upon strain reversal
journal, February 2005
- Vincze, G.; Rauch, E. F.; Gracio, J. J.
- Acta Materialia, Vol. 53, Issue 4
Precipitate-induced anisotropy in binary Al-Cu alloys
journal, November 1998
- Barlat, F.; Liu, J.
- Materials Science and Engineering: A, Vol. 257, Issue 1
The plastic anisotropy of two-phase aluminium alloys—I. Anisotropy in unidirectional deformation
journal, November 1981
- Bate, P.; Roberts, W. T.; Wilson, D. V.
- Acta Metallurgica, Vol. 29, Issue 11
Strengthening mechanisms of T1 precipitates and their influence on the plasticity of an Al–Cu–Li alloy
journal, May 2014
- Dorin, Thomas; De Geuser, Frédéric; Lefebvre, Williams
- Materials Science and Engineering: A, Vol. 605
The influence of precipitation on plastic deformation of Al–Cu–Li alloys
journal, June 2013
- Deschamps, A.; Decreus, B.; De Geuser, F.
- Acta Materialia, Vol. 61, Issue 11
The role of internal stresses on the plastic deformation of the Al–Mg–Si–Cu alloy AA6111
journal, February 2008
- Proudhon, H.; Poole, W. J.; Wang, X.
- Philosophical Magazine, Vol. 88, Issue 5
Precipitation hardening of Al-(Si, Ge) alloys
journal, September 1992
- Hornbogen, E.; Mukhopadhyay, A. K.; Starke, E. A.
- Scripta Metallurgica et Materialia, Vol. 27, Issue 6
Resistance to shape refinement of precipitates in Al-(Si,Ge) alloys during thermal cycling
journal, March 2003
- Radmilovic, V.; Tolley, A. J.; Dahmen, U.
- Metallurgical and Materials Transactions A, Vol. 34, Issue 3
Distribution of plastic strain in alloys containing small particles
journal, June 1975
- Hornbogen, Erhard; Zum Gahr, Karl-Heinz
- Metallography, Vol. 8, Issue 3
The Al-Si (Aluminum-Silicon) system
journal, February 1984
- Murray, J. L.; McAlister, A. J.
- Bulletin of Alloy Phase Diagrams, Vol. 5, Issue 1
Measurement of solid solubility of germanium in aluminum
journal, February 1993
- Fujikawa, Shin-Itiroh; Izeki, Yoh-Ichiroh
- Metallurgical Transactions A, Vol. 24, Issue 2
Phase diagrams of Al–Si and Al–Ge systems
journal, March 1998
- Kagaya, Hiroko-Matsuo; Imazawa, Kazumoto; Sato, Mayumi
- Physica B: Condensed Matter, Vol. 245, Issue 3
Foil thickness measurements from convergent-beam diffraction patterns
journal, February 1981
- Allen, Samuel M.
- Philosophical Magazine A, Vol. 43, Issue 2
The determination of foil thickness by scanning transmission electron microscopy
journal, October 1975
- Kelly, P. M.; Jostsons, A.; Blake, R. G.
- Physica Status Solidi (a), Vol. 31, Issue 2
Continuous, large strain, tension/compression testing of sheet material
journal, December 2005
- Boger, R. K.; Wagoner, R. H.; Barlat, F.
- International Journal of Plasticity, Vol. 21, Issue 12
Properties of Friction-Stir Welded Aluminum Alloys 6111 and 5083
journal, June 2008
- Gan, W.; Okamoto, K.; Hirano, S.
- Journal of Engineering Materials and Technology, Vol. 130, Issue 3
A sheet tension/compression test for elevated temperature
journal, November 2012
- Piao, K.; Lee, J. K.; Kim, J. H.
- International Journal of Plasticity, Vol. 38
Twinning-Slip Transitions in Mg AZ31B
journal, May 2012
- Piao, Kun; Chung, Kwansoo; Lee, Myoung-Gyu
- Metallurgical and Materials Transactions A, Vol. 43, Issue 9
The Bauschinger effect and discontinuous yielding
journal, August 1972
- Abel, A.; Muir, H.
- Philosophical Magazine, Vol. 26, Issue 2
Impurity Diffusion in Aluminum
journal, April 1970
- Peterson, N. L.; Rothman, S. J.
- Physical Review B, Vol. 1, Issue 8
Impurity diffusion activation energies in Al from first principles
journal, February 2009
- Simonovic, Darko; Sluiter, Marcel H. F.
- Physical Review B, Vol. 79, Issue 5
The effect of grain size and strain on the tensile flow stress of aluminium at room temperature
journal, August 1977
- Hansen, N.
- Acta Metallurgica, Vol. 25, Issue 8
The influence of precipitation on the work-hardening behavior of the aluminum alloys AA6111 and AA7030
journal, November 2003
- Cheng, L. M.; Poole, W. J.; Embury, J. D.
- Metallurgical and Materials Transactions A, Vol. 34, Issue 11
Physics and phenomenology of strain hardening: the FCC case
journal, January 2003
- Kocks, U. F.; Mecking, H.
- Progress in Materials Science, Vol. 48, Issue 3
Solid-solution hardening
journal, January 1993
- Butt, M. Z.; Feltham, P.
- Journal of Materials Science, Vol. 28, Issue 10
Kinetics of solution hardening
journal, December 1985
- Kocks, U. F.
- Metallurgical Transactions A, Vol. 16, Issue 12
Effect of load redistribution in transient plastic flow
journal, July 2006
- Gan, Wei; Zhang, Peihui; Wagoner, Robert H.
- Metallurgical and Materials Transactions A, Vol. 37, Issue 7
The Bauschinger effect and the stresses in a strained single crystal
journal, October 1992
- Hu, Xiaoyu; Wei, Chao; Margolin, Harold
- Scripta Metallurgica et Materialia, Vol. 27, Issue 7
Physically based material model for evolution of stress–strain behavior of heat treatable aluminum alloys during solution heat treatment
journal, January 2010
- Anjabin, N.; Karimi Taheri, A.
- Materials & Design, Vol. 31, Issue 1
Computational crystal plasticity
journal, January 2000
- Dawson, Paul R.
- International Journal of Solids and Structures, Vol. 37, Issue 1-2
Concepts for Integrating Plastic Anisotropy into Metal Forming Simulations
journal, April 2002
- Raabe, D.; Klose, P.; Engl, B.
- Advanced Engineering Materials, Vol. 4, Issue 4
A dislocation density based constitutive model for crystal plasticity FEM including geometrically necessary dislocations
journal, May 2006
- Ma, A.; Roters, F.; Raabe, D.
- Acta Materialia, Vol. 54, Issue 8
Effects of initial orientation, sample geometry and friction on anisotropy and crystallographic orientation changes in single crystal microcompression deformation: A crystal plasticity finite element study
journal, August 2007
- Raabe, D.; Ma, D.; Roters, F.
- Acta Materialia, Vol. 55, Issue 13
Simulation of polycrystal deformation with grain and grain boundary effects
journal, September 2011
- Lim, H.; Lee, M. G.; Kim, J. H.
- International Journal of Plasticity, Vol. 27, Issue 9
Strain gradient plasticity: Theory and experiment
journal, February 1994
- Fleck, N. A.; Muller, G. M.; Ashby, M. F.
- Acta Metallurgica et Materialia, Vol. 42, Issue 2
A dislocation density-based single crystal constitutive equation
journal, July 2010
- Lee, M. G.; Lim, H.; Adams, B. L.
- International Journal of Plasticity, Vol. 26, Issue 7
A Practical Meso-Scale Polycrystal Model to Predict Dislocation Densities and the Hall–Petch Effect
journal, January 2014
- Lim, H.; Subedi, S.; Fullwood, D. T.
- MATERIALS TRANSACTIONS, Vol. 55, Issue 1
Inelastic constitutive relations for solids: An internal-variable theory and its application to metal plasticity
journal, November 1971
- Rice, J. R.
- Journal of the Mechanics and Physics of Solids, Vol. 19, Issue 6
An analysis of nonuniform and localized deformation in ductile single crystals
journal, June 1982
- Peirce, D.; Asaro, R. J.; Needleman, A.
- Acta Metallurgica, Vol. 30, Issue 6
Correlation between microstructure and mechanical properties of severely deformed metals
journal, August 2009
- Gubicza, J.; Chinh, N. Q.; Lábár, J. L.
- Journal of Alloys and Compounds, Vol. 483, Issue 1-2
Laws for Work-Hardening and Low-Temperature Creep
journal, January 1976
- Kocks, U. F.
- Journal of Engineering Materials and Technology, Vol. 98, Issue 1
Problems of plastic gliding
journal, January 1940
- Orowan, E.
- Proceedings of the Physical Society, Vol. 52, Issue 1
Dislocation pile-up and grain boundary interactions in 304 stainless steel
journal, June 1986
- Shen, Z.; Wagoner, R. H.; Clark, W. A. T.
- Scripta Metallurgica, Vol. 20, Issue 6
Tensile deformation of aluminum single crystals at low temperatures
journal, March 1960
- Hosford, W. F.; Fleischer, R. L.; Backofen, W. A.
- Acta Metallurgica, Vol. 8, Issue 3
On the characteristics of Portevin–Le Chatelier bands in aluminum alloy 5182 under stress-controlled and strain-controlled tensile testing
journal, November 2002
- Abbadi, M.; Hähner, P.; Zeghloul, A.
- Materials Science and Engineering: A, Vol. 337, Issue 1-2
Role of dynamic strain ageing in low cycle fatigue
journal, December 1993
- Mannan, S. L.
- Bulletin of Materials Science, Vol. 16, Issue 6
Works referencing / citing this record:
Analysis of the Bauschinger Effect in Cold Drawn Pearlitic Steels
journal, January 2020
- Toribio, Jesús; Kharin, Viktor; Ayaso, Francisco-Javier
- Metals, Vol. 10, Issue 1