Self-Heating Conductive Ceramic Composites for High Temperature Thermal Energy Storage

Yang, Lin; Peng, Peng; Weger, Nathaniel; Mills, Sean; Messeri, Clément; Menon, Akanksha K.; Zeltmann, Steven; Babbe, Finn; Zheng, Qiye; Dun, Chaochao; Zhang, Chuan; Urban, Jeffrey J.; Minor, Andrew M.; Prasher, Ravi; Breunig, Hanna; Lubner, Sean

doi:10.1021/acsenergylett.4c03270

Title: Self-Heating Conductive Ceramic Composites for High Temperature Thermal Energy Storage

Journal Article · 26 January 2025 · ACS Energy Letters

DOI: https://doi.org/10.1021/acsenergylett.4c03270 · OSTI ID:2529433

^[1];

^[2];

^[3]; Mills, Sean ^[4]; Messeri, Clément ^[3];

^[5]; Zeltmann, Steven ^[4];

^[6]; Zheng, Qiye ^[7];

^[8];

^[9];

^[8];

^[4];

^[3];

^[6];

^[10]

Peking University, Beijing (China); Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States)
Chinese Academy of Sciences (CAS), Beijing (China); Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States)
Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States); Univ. of California, Berkeley, CA (United States)
Univ. of California, Berkeley, CA (United States); Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States). Molecular Foundry
Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States); Georgia Institute of Technology, Atlanta, GA (United States)
Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States)
Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States); Univ. of California, Berkeley, CA (United States); Hong Kong University of Science and Technology (HKUST) (Hong Kong)
Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States). Molecular Foundry
Peking University, Beijing (China)
Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States); Boston Univ., MA (United States)

The absence of affordable and deployable large-scale energy storage poses a major barrier to providing zero-emission energy on demand for societal decarbonization. High temperature thermal energy storage is one promising option with low cost and high scalability, but it is hindered by the inherent complexity of simultaneously satisfying all of the material requirements. Here we design a class of ceramic–carbon composites based on co-optimizing mechanical, electrical, and thermal properties. Further, these composites demonstrate stability in soak-and-hold tests and direct self-heating up to 1,936 °C and 750 thermal cycles from 500 to 1,630 °C without degradation. This thermal performance derives from their composition and microstructural design as verified by in situ high-temperature transmission electron microscopy and X-ray diffraction. They offer both higher energy density and lower cost than conventional storage technologies with a projected system Levelized Cost of Storage below the U.S. Department of Energy’s 2030 target 5 ¢/kWh (electric).

View Accepted Manuscript (DOE)

Cite

Export

Save

Research Organization:: Energy Frontier Research Centers (EFRC) (United States). Fundamental Understanding of Transport Under Reactor Extremes (FUTURE); Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States). Molecular Foundry

Sponsoring Organization:: National Science Foundation (NSF); USDOE Laboratory Directed Research and Development (LDRD) Program; USDOE Office of Science (SC), Basic Energy Sciences (BES). Scientific User Facilities (SUF)

Grant/Contract Number:: AC02-05CH11231

OSTI ID:: 2529433

Journal Information:: ACS Energy Letters, Journal Name: ACS Energy Letters Journal Issue: 2 Vol. 10; ISSN 2380-8195

Publisher:: American Chemical Society (ACS)Copyright Statement

Country of Publication:: United States

Language:: English

References (43)

Characterization of Hardness and Stiffness of Ceramic Matrix Composites through Instrumented Indentation Test Shi, Yuan; Neubrand, Achim; Koch, Dietmar Advanced Engineering Materials, Vol. 21, Issue 5 https://doi.org/10.1002/adem.201800806	journal	September 2018
Ceramics in Severe Environments: Proceedings of the Sixth University Conference on Ceramic Science North Carolina State University at Raleigh December 7–9, 1970 Kriegel, Wurth W.; Palmour, Hayne https://doi.org/10.1007/978-1-4684-3141-4	book	January 1971
Wetting Behavior and Reactivity of Molten Silicon with h-BN Substrate at Ultrahigh Temperatures up to 1750 °C Polkowski, Wojciech; Sobczak, Natalia; Nowak, Rafał Journal of Materials Engineering and Performance, Vol. 27, Issue 10 https://doi.org/10.1007/s11665-017-3114-8	journal	December 2017
Silicon-Boron Alloys as New Ultra-High Temperature Phase-Change Materials: Solid/Liquid State Interaction with the h-BN Composite Polkowski, Wojciech; Sobczak, Natalia; Bruzda, Grzegorz Silicon, Vol. 12, Issue 7 https://doi.org/10.1007/s12633-019-00256-9	journal	September 2019
Thermal stress resistance of engineering ceramics Hasselman, D. P. H. Materials Science and Engineering, Vol. 71 https://doi.org/10.1016/0025-5416(85)90235-6	journal	May 1985
Solid/liquid interaction between Si-based phase change materials and refractories Polkowski, Wojciech; Sobczak, Natalia; Nowak, Rafał Ultra-High Temperature Thermal Energy Storage, Transfer and Conversion https://doi.org/10.1016/B978-0-12-819955-8.00005-3	book	January 2021
Gas turbine combined cycle Shiozaki, Shigehiro; Fujii, Takashi; Takenaga, Kazuhiro Advances in Power Boilers https://doi.org/10.1016/B978-0-12-820360-6.00006-0	book	January 2021
A fractal model for predicting the effective thermal conductivity of liquid with suspension of nanoparticles Wang, Bu-Xuan; Zhou, Le-Ping; Peng, Xiao-Feng International Journal of Heat and Mass Transfer, Vol. 46, Issue 14 https://doi.org/10.1016/S0017-9310(03)00016-4	journal	July 2003
Technological improvements in energetic efficiency and sustainability in existing combined-cycle gas turbine (CCGT) power plants Colmenar-Santos, Antonio; Gómez-Camazón, David; Rosales-Asensio, Enrique Applied Energy, Vol. 223 https://doi.org/10.1016/j.apenergy.2018.03.191	journal	August 2018
Using facility-level emissions data to estimate the technical potential of alternative thermal sources to meet industrial heat demand McMillan, Colin A.; Ruth, Mark Applied Energy, Vol. 239 https://doi.org/10.1016/j.apenergy.2019.01.077	journal	April 2019
Performance of firebrick resistance-heated energy storage for industrial heat applications and round-trip electricity storage Stack, Daniel C.; Curtis, Daniel; Forsberg, Charles Applied Energy, Vol. 242 https://doi.org/10.1016/j.apenergy.2019.03.100	journal	May 2019
Thermal energy grid storage: Liquid containment and pumping above 2000 °C Amy, Caleb; Pishahang, Mehdi; Kelsall, Colin Applied Energy, Vol. 308 https://doi.org/10.1016/j.apenergy.2021.118081	journal	February 2022
Variation of temperature dependence of electrical resistivity with crystal structure of artificial graphite products Iwashita, Norio; Imagawa, Hiroshi; Nishiumi, Wataru Carbon, Vol. 61 https://doi.org/10.1016/j.carbon.2013.05.042	journal	September 2013
Case study of the gradient features of in situ concrete Hou, Pengkun; Zhang, Rui; Cheng, Xin Case Studies in Construction Materials, Vol. 1 https://doi.org/10.1016/j.cscm.2014.08.003	journal	January 2014
Thermal energy storage: “How previous findings determine current research priorities” Fernandes, D.; Pitié, F.; Cáceres, G. Energy, Vol. 39, Issue 1 https://doi.org/10.1016/j.energy.2012.01.024	journal	March 2012
Techno-economic assessment of solid–gas thermochemical energy storage systems for solar thermal power applications Bayon, Alicia; Bader, Roman; Jafarian, Mehdi Energy, Vol. 149 https://doi.org/10.1016/j.energy.2017.11.084	journal	April 2018
An overview of thermal energy storage systems Alva, Guruprasad; Lin, Yaxue; Fang, Guiyin Energy, Vol. 144 https://doi.org/10.1016/j.energy.2017.12.037	journal	February 2018
Carnot battery technology: A state-of-the-art review Dumont, Olivier; Frate, Guido Francesco; Pillai, Aditya Journal of Energy Storage, Vol. 32 https://doi.org/10.1016/j.est.2020.101756	journal	December 2020
Physicochemical properties of cinder and alkaline modification in tuyere birdnest region of blast furnace Guo, Ziyu; Zhang, Jianliang; Zong, Yanbing Fuel, Vol. 348 https://doi.org/10.1016/j.fuel.2023.128595	journal	September 2023
Analysis and improvement of the hot disk transient plane source method for low thermal conductivity materials Zheng, Qiye; Kaur, Sumanjeet; Dames, Chris International Journal of Heat and Mass Transfer, Vol. 151 https://doi.org/10.1016/j.ijheatmasstransfer.2020.119331	journal	April 2020
Storage Requirements and Costs of Shaping Renewable Energy Toward Grid Decarbonization Ziegler, Micah S.; Mueller, Joshua M.; Pereira, Gonçalo D. Joule, Vol. 3, Issue 9 https://doi.org/10.1016/j.joule.2019.06.012	journal	September 2019
Heat source and application-dependent levelized cost of decarbonized heat Gilbert, Tristan; Menon, Akanksha K.; Dames, Chris Joule, Vol. 7, Issue 1 https://doi.org/10.1016/j.joule.2022.11.006	journal	January 2023
Combined heat and electricity using thermal storage to decarbonize buildings and industries Lubner, Sean D.; Prasher, Ravi S. One Earth, Vol. 5, Issue 3 https://doi.org/10.1016/j.oneear.2022.03.001	journal	March 2022
Thermal energy storage: Recent developments and practical aspects Zhang, Huili; Baeyens, Jan; Cáceres, Gustavo Progress in Energy and Combustion Science, Vol. 53 https://doi.org/10.1016/j.pecs.2015.10.003	journal	March 2016
Additive manufacturing of advanced ceramic materials Lakhdar, Y.; Tuck, C.; Binner, J. Progress in Materials Science, Vol. 116 https://doi.org/10.1016/j.pmatsci.2020.100736	journal	February 2021
Progress in electrical energy storage system: A critical review Chen, Haisheng; Cong, Thang Ngoc; Yang, Wei Progress in Natural Science, Vol. 19, Issue 3 https://doi.org/10.1016/j.pnsc.2008.07.014	journal	March 2009
Local temperature measurement in TEM by parallel beam electron diffraction Niekiel, Florian; Kraschewski, Simon M.; Müller, Julian Ultramicroscopy, Vol. 176 https://doi.org/10.1016/j.ultramic.2016.11.028	journal	May 2017
Pumping liquid metal at high temperatures up to 1,673 kelvin Amy, C.; Budenstein, D.; Bagepalli, M. Nature, Vol. 550, Issue 7675 https://doi.org/10.1038/nature24054	journal	October 2017
The future cost of electrical energy storage based on experience rates Schmidt, O.; Hawkes, A.; Gambhir, A. Nature Energy, Vol. 2, Issue 8 https://doi.org/10.1038/nenergy.2017.110	journal	July 2017
Five thermal energy grand challenges for decarbonization Henry, Asegun; Prasher, Ravi; Majumdar, Arun Nature Energy, Vol. 5, Issue 9 https://doi.org/10.1038/s41560-020-0675-9	journal	August 2020
Rate capability and Ragone plots for phase change thermal energy storage Woods, Jason; Mahvi, Allison; Goyal, Anurag Nature Energy, Vol. 6, Issue 3 https://doi.org/10.1038/s41560-021-00778-w	journal	February 2021
Thermophotovoltaic efficiency of 40% LaPotin, Alina; Schulte, Kevin L.; Steiner, Myles A. Nature, Vol. 604, Issue 7905 https://doi.org/10.1038/s41586-022-04473-y	journal	April 2022
Deformation of Graphite by Thermal Cycling Jenkins, G. M.; Williamson, G. K. Journal of Applied Physics, Vol. 34, Issue 9 https://doi.org/10.1063/1.1729818	journal	September 1963
Effective thermal conductivity of particulate composites with interfacial thermal resistance Nan, Ce-Wen; Birringer, R.; Clarke, David R. Journal of Applied Physics, Vol. 81, Issue 10 https://doi.org/10.1063/1.365209	journal	May 1997
Structured illumination with thermal imaging (SI-TI): A dynamically reconfigurable metrology for parallelized thermal transport characterization Zheng, Qiye; Chalise, Divya; Jia, Mingxin Applied Physics Reviews, Vol. 9, Issue 2 https://doi.org/10.1063/5.0079842	journal	May 2022
100-Gigawatt-hour crushed-rock heat storage for CSP and nuclear Forsberg, Charles; Aljefri, Ali S. AIP Conference Proceedings https://doi.org/10.1063/5.0085684	conference	January 2022
Correlation between full width at half maximum (FWHM) of XRD peak with residual stress on ground surfaces Vashista, M.; Paul, S. Philosophical Magazine, Vol. 92, Issue 33 https://doi.org/10.1080/14786435.2012.704429	journal	November 2012
Griffith Criterion and Thermal Shock Resistance of Single‐Phase Versus Multiphase Brittle Ceramics Hasselman, D. P. H. Journal of the American Ceramic Society, Vol. 52, Issue 5 https://doi.org/10.1111/j.1151-2916.1969.tb09188.x	journal	May 1969
Unified Theory of Thermal Shock Fracture Initiation and Crack Propagation in Brittle Ceramics Hasselman, D. P. H. Journal of the American Ceramic Society, Vol. 52, Issue 11 https://doi.org/10.1111/j.1151-2916.1969.tb15848.x	journal	November 1969
Effect of Crystallites on Surface Damage and Fracture Behavior of a Glass-Ceramic Morena, R.; Niihara, K.; Haselman, D. P. H. Journal of the American Ceramic Society, Vol. 66, Issue 10 https://doi.org/10.1111/j.1151-2916.1983.tb10528.x	journal	October 1983
Effect of Crystallites on Thermal Shock Resistance of Cordierite Glass‐Ceramics Fairbanks, Carolyn J.; Lee, Hong Lim; Haselman, D. P. H. Journal of the American Ceramic Society, Vol. 67, Issue 11 https://doi.org/10.1111/j.1151-2916.1984.tb19494.x	journal	November 1984
Carbothermal shock synthesis of high-entropy-alloy nanoparticles Yao, Yonggang; Huang, Zhennan; Xie, Pengfei Science, Vol. 359, Issue 6383 https://doi.org/10.1126/science.aan5412	journal	March 2018
Microstructure and Mechanical Properties of TiC/Ti₃AlC₂ In Situ Composites Prepared by Hot Pressing Method Ruan, Miao Miao; Feng, Xiao Ming; Ai, Tao Tao Materials Science Forum, Vol. 816 https://doi.org/10.4028/www.scientific.net/MSF.816.200	journal	April 2015