Evaluation of elastic constants of M23C6 and M7C3 embedded in Fe-Cr-C alloys using in-situ XRD tensile test and self-consistent model

Lee, Hoon; Liu, Xiang; Lan, Kuan-Che; Yan, Huan; Pan, Xiao; Zhang, Xuan; Park, Jun-sang; Li, Meimei; Almer, Jonathan; Stubbins, James

doi:10.1016/j.mtla.2024.102274

Title: Evaluation of elastic constants of M23C6 and M7C3 embedded in Fe-Cr-C alloys using in-situ XRD tensile test and self-consistent model

Journal Article · 01 December 2024 · Materialia

DOI: https://doi.org/10.1016/j.mtla.2024.102274 · OSTI ID:2507091

;

; Yan, Huan;

; Zhang, Xuan;

; Li, Meimei; Almer, Jonathan; Stubbins, James

Not Available

View Journal Article

Cite

Export

Save

Sponsoring Organization:: USDOE

Grant/Contract Number:: NE0008291

OSTI ID:: 2507091

Journal Information:: Materialia, Journal Name: Materialia Journal Issue: C Vol. 38; ISSN 2589-1529

Publisher:: ElsevierCopyright Statement

Country of Publication:: Netherlands

Language:: English

References (43)

The Mathematics of the Physical Properties of Crystals Bond, Walter L. Bell System Technical Journal, Vol. 22, Issue 1 https://doi.org/10.1002/j.1538-7305.1943.tb01304.x	journal	January 1943
Berechnung der elastischen Konstanten des Vielkristalls aus den Konstanten des Einkristalls Kr�ner, Ekkehart Zeitschrift f�r Physik, Vol. 151, Issue 4 https://doi.org/10.1007/BF01337948	journal	August 1958
Young’s Modulus Surface and Poisson’s Ratio Curve for Orthorhombic Crystals Zhang, Jian-Min; Zhang, Yan; Xu, Ke-Wei Journal of Chemical Crystallography, Vol. 38, Issue 10 https://doi.org/10.1007/s10870-008-9370-6	journal	April 2008
Ductile-to-Brittle Transition in Low-Alloy Steel: A Combined Experimental and Numerical Investigation Sharma, Tenneti; Kumar, N. Naveen; Mondal, Riya Journal of Materials Engineering and Performance, Vol. 28, Issue 7 https://doi.org/10.1007/s11665-019-04173-1	journal	June 2019
The Effect of Heat Treatments on the Properties of a Ferritic High-Chromium Cast Iron ElJersifi, Adnane; Aouadi, Khalil; Ben Ali, Meriem Journal of Materials Engineering and Performance, Vol. 32, Issue 18 https://doi.org/10.1007/s11665-022-07700-9	journal	December 2022
Zur plastischen verformung des vielkristalls Kröner, E. Acta Metallurgica, Vol. 9, Issue 2 https://doi.org/10.1016/0001-6160(61)90060-8	journal	February 1961
Ultrasonic equation of state of iron Rotter, C. A.; Smith, Charles S. Journal of Physics and Chemistry of Solids, Vol. 27, Issue 2 https://doi.org/10.1016/0022-3697(66)90032-1	journal	February 1966
Crystallography of M7C3 carbides and M'7B3 borides: The difference in the local order in carbides and borides to explain the nature and density of defects in these compounds Bauer-Grosse, E.; Morniroli, J. P.; Khachfi, M. Journal of the Less Common Metals, Vol. 117, Issue 1-2 https://doi.org/10.1016/0022-5088(86)90038-X	journal	March 1986
Elastic properties of reinforced solids: Some theoretical principles Hill, R. Journal of the Mechanics and Physics of Solids, Vol. 11, Issue 5 https://doi.org/10.1016/0022-5096(63)90036-X	journal	September 1963
A re-examination of Westbrook's X-ray diffraction pattern for Cr7C3 Kayser, F. X. Materials Research Bulletin, Vol. 31, Issue 6 https://doi.org/10.1016/0025-5408(96)00045-1	journal	June 1996
Microstructure and stability of FeCrC hardfacing alloys Atamert, S.; Bhadeshia, H. K. D. H. Materials Science and Engineering: A, Vol. 130, Issue 1 https://doi.org/10.1016/0921-5093(90)90085-H	journal	November 1990
Low-activation ferritic and martensitic steels for fusion application Kohyama, A.; Hishinuma, A.; Gelles, D. S. Journal of Nuclear Materials, Vol. 233-237 https://doi.org/10.1016/S0022-3115(96)00327-3	journal	October 1996
Interphase and intergranular stress generation in carbon steels Oliver, E. C.; Daymond, M. R.; Withers, P. J. Acta Materialia, Vol. 52, Issue 7 https://doi.org/10.1016/j.actamat.2003.12.035	journal	April 2004
Tailoring the anisotropic mechanical properties of hexagonal M7X3 (M=Fe, Cr, W, Mo; X=C, B) by multialloying Chong, XiaoYu; Hu, MingYu; Wu, Peng Acta Materialia, Vol. 169 https://doi.org/10.1016/j.actamat.2019.03.015	journal	May 2019
M7C3: The story of a misunderstood carbide Eshed, E.; Choudhuri, D.; Osovski, S. Acta Materialia, Vol. 235 https://doi.org/10.1016/j.actamat.2022.117985	journal	August 2022
Structural, elastic and thermodynamic properties of iron carbide Fe 7 C 3 phases: An ab initio study Chihi, T.; Bouhemadou, A.; Reffas, M. Chinese Journal of Physics, Vol. 55, Issue 3 https://doi.org/10.1016/j.cjph.2016.12.014	journal	June 2017
The brittle-to-ductile transition in cold rolled tungsten plates: Impact of crystallographic texture, grain size and dislocation density on the transition temperature Bonnekoh, Carsten; Jäntsch, Ute; Hoffmann, Jan International Journal of Refractory Metals and Hard Materials, Vol. 78 https://doi.org/10.1016/j.ijrmhm.2018.09.010	journal	January 2019
The electronic, mechanical properties and theoretical hardness of chromium carbides by first-principles calculations Li, Yefei; Gao, Yimin; Xiao, Bing Journal of Alloys and Compounds, Vol. 509, Issue 17 https://doi.org/10.1016/j.jallcom.2011.02.009	journal	April 2011
Mechanical properties and electronic structures of M23C6 (M = Fe, Cr, Mn)-type multicomponent carbides Liu, Yangzhen; Jiang, Yehua; Xing, Jiandong Journal of Alloys and Compounds, Vol. 648 https://doi.org/10.1016/j.jallcom.2015.07.048	journal	November 2015
Formation of eutectic carbides in Fe–Cr–Mo–C alloy during non-equilibrium crystallization Wieczerzak, K.; Bala, P.; Stepien, M. Materials & Design, Vol. 94 https://doi.org/10.1016/j.matdes.2016.01.028	journal	March 2016
Elastic constants and internal friction of martensitic steel, ferritic-pearlitic steel, and α-iron Kim, Sudook A.; Johnson, Ward L. Materials Science and Engineering: A, Vol. 452-453 https://doi.org/10.1016/j.msea.2006.11.147	journal	April 2007
High-pressure behavior of iron carbide (Fe ₇ C ₃ ) at inner core conditions Mookherjee, Mainak; Nakajima, Yoichi; Steinle-Neumann, Gerd Journal of Geophysical Research, Vol. 116, Issue B4 https://doi.org/10.1029/2010JB007819	journal	January 2011
Elastic and viscoelastic properties of α iron at high temperatures Isaak, Donald G.; Masuda, Koji Journal of Geophysical Research: Solid Earth, Vol. 100, Issue B9 https://doi.org/10.1029/95JB01235	journal	September 1995
Analysis of the carbide precipitation and microstructural evolution in HCCI as a function of the heating rate and destabilization temperature Guitar, M. Agustina; Nayak, U. Pranav; Campo Schneider, Lucía Scientific Reports, Vol. 13, Issue 1 https://doi.org/10.1038/s41598-023-36364-1	journal	June 2023
Temperature dependence of the elastic constants in α‐iron single crystals: relationship to spin order and diffusion anomalies Dever, D. J. Journal of Applied Physics, Vol. 43, Issue 8 https://doi.org/10.1063/1.1661710	journal	August 1972
Elastic constants of monocrystal iron from 3 to 500 K Adams, J. J.; Agosta, D. S.; Leisure, R. G. Journal of Applied Physics, Vol. 100, Issue 11 https://doi.org/10.1063/1.2365714	journal	January 2006
First-principles study of structural, elastic, and electronic properties of chromium carbides Jiang, Chao Applied Physics Letters, Vol. 92, Issue 4 https://doi.org/10.1063/1.2838345	journal	January 2008
Mechanical properties and chemical bonding characteristics of Cr7C3 type multicomponent carbides Xiao, B.; Feng, J.; Zhou, C. T. Journal of Applied Physics, Vol. 109, Issue 2 https://doi.org/10.1063/1.3532038	journal	January 2011
A first-principles study of cementite (Fe ₃ C) and its alloyed counterparts: Elastic constants, elastic anisotropies, and isotropic elastic moduli Ghosh, G. AIP Advances, Vol. 5, Issue 8 https://doi.org/10.1063/1.4928208	journal	August 2015
Elastic constants of polycrystals with generally anisotropic crystals Kube, Christopher M.; de Jong, Maarten Journal of Applied Physics, Vol. 120, Issue 16 https://doi.org/10.1063/1.4965867	journal	October 2016
Relative mobility of screw versus edge dislocations controls the ductile-to-brittle transition in metals Lu, Yan; Zhang, Yu-Heng; Ma, En Proceedings of the National Academy of Sciences, Vol. 118, Issue 37 https://doi.org/10.1073/pnas.2110596118	journal	September 2021
The crystallography of M ₂₃ C ₆ carbides in a martensitic 9% Cr steel after tempering, aging and creep Kipelova, A.; Belyakov, A.; Kaibyshev, R. Philosophical Magazine, Vol. 93, Issue 18 https://doi.org/10.1080/14786435.2013.765995	journal	June 2013
XCII. Relations between the elastic moduli and the plastic properties of polycrystalline pure metals Pugh, S. F. The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science, Vol. 45, Issue 367 https://doi.org/10.1080/14786440808520496	journal	August 1954
Atom distributions in tau-carbide phases: Fe and Cr distributions in (Cr _{23− x} Fe _x )C ₆ with x = 0, 0·7 ₄ , 1·7 ₀ , 4·1 ₃ and 7·3 ₆ Yakel, H. L. Acta Crystallographica Section B Structural Science, Vol. 43, Issue 3 https://doi.org/10.1107/S0108768187097957	journal	June 1987
The crystal structure of Cr23C6 Bowman, A. L.; Arnold, G. P.; Storms, E. K. Acta Crystallographica Section B Structural Crystallography and Crystal Chemistry, Vol. 28, Issue 10 https://doi.org/10.1107/S0567740872007526	journal	October 1972
Study of mechanically synthesized carbide Fe7C3 Barinov, V. A.; Tsurin, V. A.; Surikov, V. T. The Physics of Metals and Metallography, Vol. 110, Issue 5 https://doi.org/10.1134/S0031918X10110074	journal	November 2010
Recent Developments in Irradiation-Resistant Steels Odette, G. R.; Alinger, M. J.; Wirth, B. D. Annual Review of Materials Research, Vol. 38, Issue 1, p. 471-503 https://doi.org/10.1146/annurev.matsci.38.060407.130315	journal	August 2008
The high-pressure anisotropic thermoelastic properties of a potential inner core carbon-bearing phase, Fe7C3, by single-crystal X-ray diffraction Lai, Xiaojing; Zhu, Feng; Liu, Jiachao American Mineralogist, Vol. 103, Issue 10 https://doi.org/10.2138/am-2018-6527	journal	October 2018
Thermoelastic property and high-pressure stability of Fe7C3: Implication for iron-carbide in the Earth's core Nakajima, Y.; Takahashi, E.; Sata, N. American Mineralogist, Vol. 96, Issue 7 https://doi.org/10.2138/am.2011.3703	journal	June 2011
Analysis of Carbides in Multi-component White Cast Iron for Hot Rolling Mill Rolls Hashimoto, Mitsuo; Kubo, Osamu; Matsubara, Yasuhiro ISIJ International, Vol. 44, Issue 2 https://doi.org/10.2355/isijinternational.44.372	journal	January 2004
Change in Primary (Cr, Fe)7C3 Carbides Induced by Electric Current Pulse Modification of Hypereutectic High Chromium Cast Iron Melt Geng, Baoyu; Zhou, Rongfeng; Li, Lu Materials, Vol. 12, Issue 1 https://doi.org/10.3390/ma12010032	journal	December 2018
First Principles Investigation of Binary Chromium Carbides Cr7C3, Cr3C2 and Cr23C6: Electronic Structures, Mechanical Properties and Thermodynamic Properties under Pressure Sun, Liang; Ji, Xiongshuai; Zhao, Liang Materials, Vol. 15, Issue 2 https://doi.org/10.3390/ma15020558	journal	January 2022
Effect of Titanium on the Microstructure and Mechanical Properties of High-Carbon Martensitic Stainless Steel 8Cr13MoV Yu, Wen-Tao; Li, Jing; Shi, Cheng-Bin Metals, Vol. 6, Issue 8 https://doi.org/10.3390/met6080193	journal	August 2016

Similar Records

Molybdenum effect on Fe--Cr--Ni-alloy elastic constants

Journal Article · 1988 · J. Mat. Res.; (United States) · OSTI ID:5621144

Ledbetter, H M; Kim, S A

In-situ observations of the dissolution of carbides in an Fe-Cr-C alloy

Journal Article · 1999 · Scripta Materialia · OSTI ID:20006433

Qian, M

Elastic constants of Fe-Ni-C alloys

Thesis/Dissertation · 1971 · OSTI ID:4747213

Diesburg, Daniel Eugene

Title: Evaluation of elastic constants of M23C6 and M7C3 embedded in Fe-Cr-C alloys using in-situ XRD tensile test and self-consistent model

Citation Formats

References (43)

Similar Records

Related Subjects