Experimental characterization of an additively manufactured heat exchanger for high temperature and pressure applications

Rasouli, Erfan; Tano, Ines-Noelly; Aboud, Aref; Seo, Junwon; Lamprinakos, Nicholas; Rollett, Anthony; Narayanan, Vinod

doi:10.1016/j.applthermaleng.2025.125412

Title: Experimental characterization of an additively manufactured heat exchanger for high temperature and pressure applications

Journal Article · 01 April 2025 · Applied Thermal Engineering

DOI: https://doi.org/10.1016/j.applthermaleng.2025.125412 · OSTI ID:2499578

Rasouli, Erfan; Tano, Ines-Noelly; Aboud, Aref; Seo, Junwon; Lamprinakos, Nicholas; Rollett, Anthony; Narayanan, Vinod

Not Available

View Journal Article

Cite

Export

Save

Sponsoring Organization:: USDOE Office of Energy Efficiency and Renewable Energy (EERE)

OSTI ID:: 2499578

Journal Information:: Applied Thermal Engineering, Journal Name: Applied Thermal Engineering Journal Issue: C Vol. 264; ISSN 1359-4311

Publisher:: ElsevierCopyright Statement

Country of Publication:: United Kingdom

Language:: English

References (28)

Describing the uncertainties in experimental results Moffat, Robert J. Experimental Thermal and Fluid Science, Vol. 1, Issue 1 https://doi.org/10.1016/0894-1777(88)90043-X	journal	January 1988
An additively manufactured metallic manifold-microchannel heat exchanger for high temperature applications Zhang, Xiang; Tiwari, Ratnesh; Shooshtari, Amir H. Applied Thermal Engineering, Vol. 143 https://doi.org/10.1016/j.applthermaleng.2018.08.032	journal	October 2018
Optimizing the size of a printed circuit heat exchanger by multi-objective genetic algorithm Yang, Yu; Li, Hongzhi; Yao, Mingyu Applied Thermal Engineering, Vol. 167 https://doi.org/10.1016/j.applthermaleng.2019.114811	journal	February 2020
Design, additive manufacturing, and performance of heat exchanger with a novel flow-path architecture Sabau, Adrian S.; Bejan, Adrian; Brownell, David Applied Thermal Engineering, Vol. 180 https://doi.org/10.1016/j.applthermaleng.2020.115775	journal	November 2020
Additive manufacturing of heat exchangers in aerospace applications: a review Careri, Francesco; Khan, Raja H. U.; Todd, Catherine Applied Thermal Engineering, Vol. 235 https://doi.org/10.1016/j.applthermaleng.2023.121387	journal	November 2023
Design and techno economic optimization of an additively manufactured compact heat exchanger for high temperature and high pressure applications Das, Sreedev; Rasouli, Erfan; Ziev, Tracey Applied Thermal Engineering, Vol. 245 https://doi.org/10.1016/j.applthermaleng.2024.122778	journal	May 2024
Analyzing heat transfer performance of ARCH lattice microchannel heat exchanger fabricated using selective laser melting Zhang, Xiaofeng; Yao, Jun; Zhang, Xinhao Applied Thermal Engineering, Vol. 260 https://doi.org/10.1016/j.applthermaleng.2024.124959	journal	February 2025
Thermal and mechanical performance of a hybrid printed circuit heat exchanger used for supercritical carbon dioxide Brayton cycle Lian, Jie; Xu, Dongjun; Chang, Hongliang Energy Conversion and Management, Vol. 245 https://doi.org/10.1016/j.enconman.2021.114573	journal	October 2021
Forced convective heat transfer across a pin fin micro heat sink Peles, Yoav; Koşar, Ali; Mishra, Chandan International Journal of Heat and Mass Transfer, Vol. 48, Issue 17 https://doi.org/10.1016/j.ijheatmasstransfer.2005.03.017	journal	August 2005
Pitch and aspect ratio effects on single-phase heat transfer through microscale pin fin heat sinks Rasouli, Erfan; Naderi, Cameron; Narayanan, Vinod International Journal of Heat and Mass Transfer, Vol. 118 https://doi.org/10.1016/j.ijheatmasstransfer.2017.10.105	journal	March 2018
Experimental study on the heat transfer performance of a molten-salt printed circuit heat exchanger with airfoil fins for concentrating solar power Wang, Wen-Qi; Qiu, Yu; He, Ya-Ling International Journal of Heat and Mass Transfer, Vol. 135 https://doi.org/10.1016/j.ijheatmasstransfer.2019.02.012	journal	June 2019
Experimental investigation of pressure drop and heat transfer in high temperature supercritical CO2 and helium in a printed-circuit heat exchanger Katz, Alon; Aakre, Shaun R.; Anderson, Mark H. International Journal of Heat and Mass Transfer, Vol. 171 https://doi.org/10.1016/j.ijheatmasstransfer.2021.121089	journal	June 2021
State-of-the-art in heat exchanger additive manufacturing Kaur, Inderjot; Singh, Prashant International Journal of Heat and Mass Transfer, Vol. 178 https://doi.org/10.1016/j.ijheatmasstransfer.2021.121600	journal	October 2021
Heat transfer performance of pillow plate heat exchanger with molten salt and supercritical carbon dioxide Yao, Yecheng; Ding, Jing; Zhang, Yuanyuan International Journal of Heat and Mass Transfer, Vol. 183 https://doi.org/10.1016/j.ijheatmasstransfer.2021.122211 122211	journal	February 2022
Pressure drop and heat transfer characteristics of nitrate salt and supercritical CO2 in a diffusion-bonded heat exchanger Aakre, Shaun R.; Anderson, Mark H. International Journal of Heat and Mass Transfer, Vol. 189 https://doi.org/10.1016/j.ijheatmasstransfer.2022.122691	journal	June 2022
3D topology optimization and additive manufacturability of two-fluid heat exchangers Sun, Sicheng; Rankouhi, Behzad; Thoma, Dan J. International Journal of Heat and Mass Transfer, Vol. 236 https://doi.org/10.1016/j.ijheatmasstransfer.2024.126299	journal	January 2025
Ultra-power-dense heat exchanger development through genetic algorithm design and additive manufacturing Moon, Hyunkyu; McGregor, Davis J.; Miljkovic, Nenad Joule, Vol. 5, Issue 11 https://doi.org/10.1016/j.joule.2021.08.004	journal	November 2021
Review of printed circuit heat exchangers and its applications in solar thermal energy Ma, Yuan; Xie, Gongnan; Hooman, Kamel Renewable and Sustainable Energy Reviews, Vol. 155 https://doi.org/10.1016/j.rser.2021.111933	journal	March 2022
An additively-manufactured molten salt-to-supercritical carbon di-oxide primary heat exchanger for solar thermal power generation – Design and techno-economic performance Tano, Ines-Noelly; Rasouli, Erfan; Ziev, Tracey Solar Energy, Vol. 234 https://doi.org/10.1016/j.solener.2022.01.056	journal	March 2022
Additive manufacturing and testing of a ceramic heat exchanger for high-temperature and high-pressure applications for concentrating solar power Du, Wenchao; Yu, Wenhua; France, David M. Solar Energy, Vol. 236 https://doi.org/10.1016/j.solener.2022.03.046	journal	April 2022
Ceramic–metal composites for heat exchangers in concentrated solar power plants Caccia, M.; Tabandeh-Khorshid, M.; Itskos, G. Nature, Vol. 562, Issue 7727 https://doi.org/10.1038/s41586-018-0593-1	journal	October 2018
Introduction of an additively manufactured multi-furcating heat exchanger Gerstler, William D.; Erno, Daniel 2017 16th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm) https://doi.org/10.1109/ITHERM.2017.7992545	conference	May 2017
Effect of Tip Clearance on the Thermal and Hydrodynamic Performance of a Shrouded Pin Fin Array Moores, Kevin A.; Joshi, Yogendra K. Journal of Heat Transfer, Vol. 125, Issue 6 https://doi.org/10.1115/1.1621897	journal	November 2003
Nusselt Number and Friction Factor of Staggered Arrays of Low Aspect Ratio Micropin-Fins Under Cross Flow for Water as Fluid Prasher, Ravi S.; Dirner, John; Chang, Je-Young Journal of Heat Transfer, Vol. 129, Issue 2 https://doi.org/10.1115/1.2402179	journal	April 2006
A Scalable Compact Additively Manufactured Molten Salt to Supercritical Carbon Dioxide Heat Exchanger for Solar Thermal Application Tano, Ines-Noelly; Rasouli, Erfan; Ziev, Tracey Journal of Solar Energy Engineering, Vol. 146, Issue 1 https://doi.org/10.1115/1.4063081	journal	August 2023
On-Sun Characterization of Microchannel Supercritical Carbon Dioxide Solar Thermal Receivers: Preliminary Findings Rasouli, Erfan; Mande, Caton W.; Stevens, Matthew M. ASME 2019 13th International Conference on Energy Sustainability collocated with the ASME 2019 Heat Transfer Summer Conference https://doi.org/10.1115/ES2019-3898	conference	December 2019
Assessment of the Material Performance for TCR Applications (Progress Report) Li, Meimei; Zhang, Xuan; Chen, Wei-Ying https://doi.org/10.2172/1608042	report	March 2020
Performance of Pin Fin Cast Aluminum Coldwalls, Part 1: Friction Factor Correlations Short, B. Elliott; Raad, Peter E.; Price, Donald C. Journal of Thermophysics and Heat Transfer, Vol. 16, Issue 3 https://doi.org/10.2514/2.6692	journal	July 2002

Similar Records

Experimental Characterization of an Additively Manufactured Inconel 718 Heat Exchanger for High-Temperature Applications

Journal Article · 2023 · Energies · OSTI ID:1974268

Battaglia, Fabio; Arie, Martinus; Zhang, Xiang; +2 more

Experimental characterization of heat transfer in an additively manufactured polymer heat exchanger

Journal Article · 2017 · Applied Thermal Engineering · OSTI ID:1410828

Arie, Martinus A.; Shooshtari, Amir H.; Tiwari, Ratnesh; +3 more

Design and techno economic optimization of an additively manufactured compact heat exchanger for high temperature and high pressure applications

Journal Article · 2024 · Applied Thermal Engineering · OSTI ID:2310401

Das, Sreedev; Rasouli, Erfan; Ziev, Tracey; +5 more

Title: Experimental characterization of an additively manufactured heat exchanger for high temperature and pressure applications

Citation Formats

References (28)

Similar Records

Related Subjects