An implicit solution for Asay foil trajectories generated by separable, sustained-production ejecta source models

Tregillis, Ian L.; Koskelo, Aaron

doi:10.1063/5.0228457

Title: An implicit solution for Asay foil trajectories generated by separable, sustained-production ejecta source models

Journal Article · 16 September 2024 · Journal of Applied Physics

DOI: https://doi.org/10.1063/5.0228457 · OSTI ID:2478619

^[1];

^[1]

Los Alamos National Laboratory (LANL), Los Alamos, NM (United States)

We present a simple implicit solution for the time-dependent trajectory of a thin Asay foil ejecta diagnostic for the general case where the impinging ejecta cloud is generated by a source function characterized by an arbitrary (sustained) time dependence and a time-independent (stationary) particle velocity distribution. In the limit that the source function time dependence becomes a delta function, this solution—which is amenable to rapid numerical calculations of arbitrary accuracy—exactly recovers a previously published solution for the special case of instantaneous ejecta production. We also derive simple expressions for the free-surface arrival (catch-up) time as well as the true ejecta areal mass accumulation on the accelerating foil and place bounds on the level of error incurred when applying instant-production mass solutions to a sustained-production trajectory. We demonstrate these solutions with example calculations for hypothetical source functions spanning a wide range of ejecta production durations, velocity distributions, and temporal behaviors. These calculations demonstrate how the foil trajectory is often insensitive to the temporal dependence of the source function, instead being dominated by the velocity distribution. We quantify this insensitivity using a “compatibility score” metric. Under certain conditions, one may capitalize upon this insensitivity to obtain a good approximation of the second integral of the velocity distribution from the observed foil trajectory.

View Accepted Manuscript (DOE)

Cite

Export

Save

Research Organization:: Los Alamos National Laboratory (LANL), Los Alamos, NM (United States)

Sponsoring Organization:: USDOE National Nuclear Security Administration (NNSA)

Grant/Contract Number:: 89233218CNA000001

OSTI ID:: 2478619

Report Number(s):: LA-UR--24-27066

Journal Information:: Journal of Applied Physics, Journal Name: Journal of Applied Physics Journal Issue: 11 Vol. 136; ISSN 0021-8979

Publisher:: American Institute of Physics (AIP)Copyright Statement

Country of Publication:: United States

Language:: English

References (45)

An asymptotic expansion for the semi‐infinite sum of Dirac‐δ functions Rendón, Otto; Sigalotti, Leonardo Di G.; Klapp, Jaime Mathematical Methods in the Applied Sciences, Vol. 40, Issue 18 https://doi.org/10.1002/mma.4479	journal	June 2017
Ejecta Production from Second Shock: Numerical Simulations and Experiments Karkhanis, V.; Ramaprabhu, P.; Buttler, W. T. Journal of Dynamic Behavior of Materials, Vol. 3, Issue 2 https://doi.org/10.1007/s40870-017-0091-9	journal	February 2017
Μeasurements of Sn Ejecta Particle-Size Distributions Using Ultraviolet In-line Fraunhofer Holography Sorenson, D. S.; Capelle, G. A.; Grover, M. Journal of Dynamic Behavior of Materials, Vol. 3, Issue 2 https://doi.org/10.1007/s40870-017-0105-7	journal	April 2017
Investigation of Ejecta Production from Tin at an Elevated Temperature and the Eutectic Alloy Lead–Bismuth Bell, D. J.; Routley, N. R.; Millett, J. C. F. Journal of Dynamic Behavior of Materials, Vol. 3, Issue 2 https://doi.org/10.1007/s40870-017-0106-6	journal	March 2017
Ejected Particle Size Distributions from Shocked Metal Surfaces Schauer, M. M.; Buttler, W. T.; Frayer, D. K. Journal of Dynamic Behavior of Materials, Vol. 3, Issue 2 https://doi.org/10.1007/s40870-017-0111-9	journal	April 2017
A Source Model for Ejecta Hammerberg, J. E.; Buttler, W. T.; Cherne, F. J. Journal of Dynamic Behavior of Materials, Vol. 3, Issue 2 https://doi.org/10.1007/s40870-017-0116-4	journal	June 2017
A Model of a Source of Shock Wave Metal Ejection Based on Richtmyer–Meshkov Instability Theory Georgievskaya, Alla B.; Raevsky, V. A. Journal of Dynamic Behavior of Materials, Vol. 3, Issue 2 https://doi.org/10.1007/s40870-017-0118-2	journal	June 2017
Advances in Ejecta Diagnostics at LLNL Steele, P. T.; Jacoby, B. A.; Compton, S. M. Journal of Dynamic Behavior of Materials, Vol. 3, Issue 2 https://doi.org/10.1007/s40870-017-0119-1	journal	May 2017
Unstable Richtmyer–Meshkov growth of solid and liquid metals in vacuum Buttler, W. T.; Oró, D. M.; Preston, D. L. Journal of Fluid Mechanics, Vol. 703 https://doi.org/10.1017/jfm.2012.190	journal	June 2012
Piezoelectric probe for the detection of shock‐induced spray and spall Speight, C. S.; Harper, L.; Smeeton, V. S. Review of Scientific Instruments, Vol. 60, Issue 12 https://doi.org/10.1063/1.1140443	journal	December 1989
Ejecta particle size distributions for shock loaded Sn and Al metals Sorenson, D. S.; Minich, R. W.; Romero, J. L. Journal of Applied Physics, Vol. 92, Issue 10 https://doi.org/10.1063/1.1515125	journal	November 2002
Limiting Conditions for Jet Formation in High Velocity Collisions Walsh, J. M.; Shreffler, R. G.; Willig, F. J. Journal of Applied Physics, Vol. 24, Issue 3 https://doi.org/10.1063/1.1721278	journal	March 1953
Development of a Non-Radiographic Spall and Damage Diagnostic Holtkamp, D. B. AIP Conference Proceedings https://doi.org/10.1063/1.1780280	conference	January 2004
Richtmyer–Meshkov instability of arbitrary shapes Mikaelian, Karnig O. Physics of Fluids, Vol. 17, Issue 3 https://doi.org/10.1063/1.1848547	journal	March 2005
Piezoelectric characterization of ejecta from shocked tin surfaces Vogan, W. S.; Anderson, W. W.; Grover, M. Journal of Applied Physics, Vol. 98, Issue 11 https://doi.org/10.1063/1.2132521	journal	December 2005
Investigation of Ejecta Production in Tin Using Plate Impact Experiments Rigg, P. A. SHOCK COMPRESSION OF CONDENSED MATTER - 2005: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter, AIP Conference Proceedings https://doi.org/10.1063/1.2263559	conference	January 2006
Asay window: A new spall diagnostic McCluskey, Craig W.; Wilke, Mark D.; Anderson, William W. Review of Scientific Instruments, Vol. 77, Issue 11 https://doi.org/10.1063/1.2336753	journal	November 2006
Dynamic comparisons of piezoelectric ejecta diagnostics Buttler, W. T.; Zellner, M. B.; Olson, R. T. Journal of Applied Physics, Vol. 101, Issue 6 https://doi.org/10.1063/1.2712177	journal	March 2007
Effects of shock-breakout pressure on ejection of micron-scale material from shocked tin surfaces Zellner, M. B.; Grover, M.; Hammerberg, J. E. Journal of Applied Physics, Vol. 102, Issue 1 https://doi.org/10.1063/1.2752130	journal	July 2007
Probing the underlying physics of ejecta production from shocked Sn samples Zellner, M. B.; McNeil, W. Vogan; Hammerberg, J. E. Journal of Applied Physics, Vol. 103, Issue 12 https://doi.org/10.1063/1.2939253	journal	June 2008
Exploring Richtmyer–Meshkov instability phenomena and ejecta cloud physics Zellner, M. B.; Buttler, W. T. Applied Physics Letters, Vol. 93, Issue 11 https://doi.org/10.1063/1.2982421	journal	September 2008
Thick‐plate technique for measuring ejecta from shocked surfaces Asay, J. R. Journal of Applied Physics, Vol. 49, Issue 12 https://doi.org/10.1063/1.324545	journal	December 1978
Ejection of material from shocked surfaces of tin, tantalum and lead-alloys Andriot, P.; Chapron, P.; Olive, F. AIP Conference Proceeding Volume 78 https://doi.org/10.1063/1.33316	conference	January 1982
Estimation of spectral characteristics of particles ejected from the free surfaces of metals and liquids under a shock wave effect Georgievskaya, Alla; Raevsky, Viktor Alekseevish SHOCK COMPRESSION OF CONDENSED MATTER - 2011: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter, AIP Conference Proceedings https://doi.org/10.1063/1.3686448	conference	January 2012
A class of ejecta transport test problems Oro, David M.; Hammerberg, J. E.; Buttler, William T. SHOCK COMPRESSION OF CONDENSED MATTER - 2011: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter, AIP Conference Proceedings https://doi.org/10.1063/1.3686531	conference	January 2012
Experimental study of ejecta from shock melted lead Chen, Yongtao; Hu, Haibo; Tang, Tiegang Journal of Applied Physics, Vol. 111, Issue 5 https://doi.org/10.1063/1.3692570	journal	March 2012
Skew photonic Doppler velocimetry to investigate the expansion of a cloud of droplets created by micro-spalling of laser shock-melted metal foils Loison, D.; de Rességuier, T.; Dragon, A. Journal of Applied Physics, Vol. 112, Issue 11 https://doi.org/10.1063/1.4769304	journal	December 2012
Ejecta source model based on the nonlinear Richtmyer-Meshkov instability Dimonte, Guy; Terrones, Guillermo; Cherne, F. J. Journal of Applied Physics, Vol. 113, Issue 2 https://doi.org/10.1063/1.4773575	journal	January 2013
Power law and exponential ejecta size distributions from the dynamic fragmentation of shock-loaded Cu and Sn metals under melt conditions Durand, O.; Soulard, L. Journal of Applied Physics, Vol. 114, Issue 19 https://doi.org/10.1063/1.4832758	journal	November 2013
Experimental observations on the links between surface perturbation parameters and shock-induced mass ejection Monfared, S. K.; Oró, D. M.; Grover, M. Journal of Applied Physics, Vol. 116, Issue 6 https://doi.org/10.1063/1.4891449	journal	August 2014
Second shock ejecta measurements with an explosively driven two-shockwave drive Buttler, W. T.; Oró, D. M.; Olson, R. T. Journal of Applied Physics, Vol. 116, Issue 10 https://doi.org/10.1063/1.4895053	journal	September 2014
Ejected particle size measurement using Mie scattering in high explosive driven shockwave experiments Monfared, S. K.; Buttler, W. T.; Frayer, D. K. Journal of Applied Physics, Vol. 117, Issue 22 https://doi.org/10.1063/1.4922180	journal	June 2015
On shock driven jetting of liquid from non-sinusoidal surfaces into a vacuum Cherne, F. J.; Hammerberg, J. E.; Andrews, M. J. Journal of Applied Physics, Vol. 118, Issue 18 https://doi.org/10.1063/1.4934645	journal	November 2015
An improved Asay window technique for investigating the micro-spall of an explosively-driven tin Chen, Yongtao; Hong, Renkai; Chen, Haoyu Review of Scientific Instruments, Vol. 88, Issue 1 https://doi.org/10.1063/1.4973699	journal	January 2017
A numerical study of bubble and spike velocities in shock-driven liquid metals Karkhanis, V.; Ramaprabhu, P.; Cherne, F. J. Journal of Applied Physics, Vol. 123, Issue 2 https://doi.org/10.1063/1.5008495	journal	January 2018
Proton radiography measurements and models of ejecta structure in shocked Sn Hammerberg, J. E.; Buttler, W. T.; Llobet, A. AIP Conference Proceedings https://doi.org/10.1063/1.5044848	conference	January 2018
Ejection of material from shocked surfaces Asay, J. R.; Mix, L. P.; Perry, F. C. Applied Physics Letters, Vol. 29, Issue 5 https://doi.org/10.1063/1.89066	journal	September 1976
Velocity and mass density of the ejecta produced from sinusoidal grooves in laser shock-loaded tin Prudhomme, G.; de Rességuier, T.; Roland, C. Journal of Applied Physics, Vol. 128, Issue 15 https://doi.org/10.1063/5.0022940	journal	October 2020
A mathematical framework for ejecta cloud dynamics with application to source models and piezoelectric mass measurements Tregillis, I. L.; Koskelo, Aaron Journal of Applied Physics, Vol. 130, Issue 14 https://doi.org/10.1063/5.0065960	journal	October 2021
Analytic solutions for Asay foil trajectories with implications for ejecta source models and mass measurements Tregillis, I. L.; Koskelo, Aaron; Harrison, Alan K. Journal of Applied Physics, Vol. 130, Issue 12 https://doi.org/10.1063/5.0065961	journal	September 2021
Non-Richtmyer–Meshkov instability ejecta production based on shallow bubble collapse Maskaly, G. R.; Stevens, G. D.; La Lone, B. M. Journal of Applied Physics, Vol. 133, Issue 2 https://doi.org/10.1063/5.0132256	journal	January 2023
Analytic Approach to Nonlinear Rayleigh-Taylor and Richtmyer-Meshkov Instabilities Mikaelian, Karnig O. Physical Review Letters, Vol. 80, Issue 3 https://doi.org/10.1103/PhysRevLett.80.508	journal	January 1998
Analytical Solutions of Layzer-Type Approach to Unstable Interfacial Fluid Mixing Zhang, Qiang Physical Review Letters, Vol. 81, Issue 16 https://doi.org/10.1103/PhysRevLett.81.3391	journal	October 1998
Analytic Solutions as a Tool for Verification and Validation of a Multiphysics Model Tregillis, I. L.; Koskelo, Aaron Journal of Verification, Validation and Uncertainty Quantification, Vol. 4, Issue 4 https://doi.org/10.1115/1.4045747	journal	December 2019
A Practical Validation Assessment Workflow Wilson, Brandon M.; Koskelo, Aaron Journal of Verification, Validation and Uncertainty Quantification, Vol. 5, Issue 1 https://doi.org/10.1115/1.4046787	journal	March 2020

Similar Records

(U) A Theoretical Study of Asay Foil Trajectories (V.02)

Technical Report · 2021 · OSTI ID:1772394

Tregillis, Ian Lee

Analytic solutions for Asay foil trajectories with implications for ejecta source models and mass measurements

Journal Article · 2021 · Journal of Applied Physics · OSTI ID:1826524

Tregillis, Ian Lee; Koskelo, Aaron C.; Harrison, Alan Kent

Particulate distribution function evolution for ejecta transport

Conference · 2009 · OSTI ID:989834

Hammerberg, James Edward; Plohr, Bradley J

Related Subjects

70 PLASMA PHYSICS AND FUSION TECHNOLOGY

Title: An implicit solution for Asay foil trajectories generated by separable, sustained-production ejecta source models

Citation Formats

References (45)

Similar Records

Related Subjects