A Method for Dynamic Kolsky Bar Compression at High Temperatures: Application to Ti-6Al-4V

Journal Article · 07 November 2024 · Experimental Techniques

DOI: https://doi.org/10.1007/s40799-024-00762-5 · OSTI ID:2476436

Pittman, E. R. ; Clarke, A. J.; Lamberson, L. E.

Abstract An experimental apparatus for measuring the dynamic behavior of materials subjected to strain rates on the order of 10 $$^3$$ $_{}^3$  s $$$$^{-1}$$$$ $_{}^{-1}$ and temperatures up to 800°C with a unique triple actuation system is developed in this work. This system is based on the traditional Kolsky (or split-Hopkinson pressure) bar design, with the addition of an external furnace used to heat the specimen to the desired temperature. A synchronized triple pneumatic actuation system is used to control the motion and timing of the the sample, incident, and transmitted bars. The cold contact time (CCT), or the time during which the heated sample is in contact with the room temperature bars before compression, is measured experimentally and carefully controlled to minimize the development of a temperature gradient across the sample and avoid heating of the bars. Experiments are performed in conjunction with ultra high speed imaging and 2D digital image correlation (DIC), as well as high speed thermal imaging. To verify the viability of the proposed system, experiments were conducted on Ti-6Al-4V (wt.%) at temperatures from 25°C up to and 800°C at an average strain rate of approximately 1200 s $$$$^{-1}$$$$ $_{}^{-1}$ .

• Sponsoring Organization: USDOE National Nuclear Security Administration (NNSA)
• Grant/Contract Number: 89233218CNA000001; NA0004152
• OSTI ID: 2476436
• Journal Information: Experimental Techniques, Journal Name: Experimental Techniques Journal Issue: 3 Vol. 49; ISSN 0732-8818
• Publisher: Springer Science + Business MediaCopyright Statement
• Country of Publication: United States
• Language: English