A critical discussion of elasto-visco-plastic self-consistent (EVPSC) models

Jeon, Bohye; Jeong, Youngung; Tomé, Carlos N.

doi:10.1016/j.jmrt.2024.11.043

Title: A critical discussion of elasto-visco-plastic self-consistent (EVPSC) models

Journal Article · 01 November 2024 · Journal of Materials Research and Technology

DOI: https://doi.org/10.1016/j.jmrt.2024.11.043 · OSTI ID:2476429

Jeon, Bohye;

; Tomé, Carlos N.

Not Available

View Journal Article

Cite

Export

Save

Sponsoring Organization:: USDOE Office of Science (SC), Basic Energy Sciences (BES)

OSTI ID:: 2476429

Journal Information:: Journal of Materials Research and Technology, Journal Name: Journal of Materials Research and Technology Journal Issue: C Vol. 33; ISSN 2238-7854

Publisher:: ElsevierCopyright Statement

Country of Publication:: Brazil

Language:: English

References (38)

The relation between macroscopic and microscopic strain hardening in F.C.C. polycrystals Tome, C.; Canova, G. R.; Kocks, U. F. Acta Metallurgica, Vol. 32, Issue 10 https://doi.org/10.1016/0001-6160(84)90222-0	journal	October 1984
A self consistent approach of the large deformation polycrystal viscoplasticity Molinari, A.; Canova, G. R.; Ahzi, S. Acta Metallurgica, Vol. 35, Issue 12 https://doi.org/10.1016/0001-6160(87)90297-5	journal	December 1987
Self-consistent modeling of visco-elastic polycrystals: Application to irradiation creep and growth Turner, P. A.; Tomé, C. N. Journal of the Mechanics and Physics of Solids, Vol. 41, Issue 7 https://doi.org/10.1016/0022-5096(93)90090-3	journal	July 1993
A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals: Application to zirconium alloys Lebensohn, R. A.; Tomé, C. N. Acta Metallurgica et Materialia, Vol. 41, Issue 9 https://doi.org/10.1016/0956-7151(93)90130-K	journal	September 1993
A selfconsistent formulation for the prediction of the anisotropic behavior of viscoplastic polycrystals with voids Lebensohn, R. A.; Tomé, C. N.; Maudlin, P. J. Journal of the Mechanics and Physics of Solids, Vol. 52, Issue 2 https://doi.org/10.1016/S0022-5096(03)00114-5	journal	February 2004
An affine formulation for the prediction of the effective properties of nonlinear composites and polycrystals Masson, R.; Bornert, M.; Suquet, P. Journal of the Mechanics and Physics of Solids, Vol. 48, Issue 6-7 https://doi.org/10.1016/S0022-5096(99)00071-X	journal	June 2000
Mechanical response of zirconium—I. Derivation of a polycrystal constitutive law and finite element analysis Tomé, C. Acta Materialia, Vol. 49, Issue 15 https://doi.org/10.1016/S1359-6454(01)00190-2	journal	September 2001
Simulation of earing during deep drawing of magnesium alloy AZ31 Walde, Tom; Riedel, Hermann Acta Materialia, Vol. 55, Issue 3 https://doi.org/10.1016/j.actamat.2006.09.007	journal	February 2007
Studying the effect of stress relaxation and creep on lattice strain evolution of stainless steel under tension Wang, H.; Clausen, B.; Tomé, C. N. Acta Materialia, Vol. 61, Issue 4 https://doi.org/10.1016/j.actamat.2012.10.027	journal	February 2013
Average intragranular misorientation trends in polycrystalline materials predicted by a viscoplastic self-consistent approach Lebensohn, Ricardo A.; Zecevic, Miroslav; Knezevic, Marko Acta Materialia, Vol. 104 https://doi.org/10.1016/j.actamat.2015.10.035	journal	February 2016
Modelling recrystallization textures driven by intragranular fluctuations implemented in the viscoplastic self-consistent formulation Zecevic, Miroslav; Lebensohn, Ricardo A.; McCabe, Rodney J. Acta Materialia, Vol. 164 https://doi.org/10.1016/j.actamat.2018.11.002	journal	February 2019
The nature of yielding and anelasticity in metals Li, Dayong; Wagoner, Robert H. Acta Materialia, Vol. 206 https://doi.org/10.1016/j.actamat.2021.116625	journal	March 2021
Sequential linearization method for viscous/elastic heterogeneous materials Kowalczyk-Gajewska, K.; Petryk, H. European Journal of Mechanics - A/Solids, Vol. 30, Issue 5 https://doi.org/10.1016/j.euromechsol.2011.04.002	journal	September 2011
Texture-based forming limit prediction for Mg sheet alloys ZE10 and AZ31 Steglich, D.; Jeong, Y. International Journal of Mechanical Sciences, Vol. 117 https://doi.org/10.1016/j.ijmecsci.2016.08.013	journal	October 2016
A crystal plasticity finite element analysis on the effect of prestrain on springback Joo, Mooyeong; Wi, Min-Su; Yoon, Seong-Yong International Journal of Mechanical Sciences, Vol. 237 https://doi.org/10.1016/j.ijmecsci.2022.107796	journal	January 2023
Predictions of forming limit diagrams using a rate-dependent polycrystal self-consistent plasticity model Signorelli, J.; Bertinetti, M.; Turner, P. International Journal of Plasticity, Vol. 25, Issue 1 https://doi.org/10.1016/j.ijplas.2008.01.005	journal	January 2009
Crystal plasticity-based forming limit prediction for non-cubic metals: Application to Mg alloy AZ31B John Neil, C.; Agnew, Sean R. International Journal of Plasticity, Vol. 25, Issue 3 https://doi.org/10.1016/j.ijplas.2008.05.003	journal	March 2009
Multiscale modeling of plasticity based on embedding the viscoplastic self-consistent formulation in implicit finite elements Segurado, Javier; Lebensohn, Ricardo A.; LLorca, Javier International Journal of Plasticity, Vol. 28, Issue 1 https://doi.org/10.1016/j.ijplas.2011.07.002	journal	January 2012
A polycrystal plasticity based discontinuous dynamic recrystallization simulation method and its application to copper Zhou, Guowei; Li, Zihan; Li, Dayong International Journal of Plasticity, Vol. 91 https://doi.org/10.1016/j.ijplas.2017.01.001	journal	April 2017
Mechanism-based modeling of thermal and irradiation creep behavior: An application to ferritic/martensitic HT9 steel Wen, W.; Kohnert, A.; Arul Kumar, M. International Journal of Plasticity, Vol. 126 https://doi.org/10.1016/j.ijplas.2019.11.012	journal	March 2020
Finite element analysis using an incremental elasto-visco-plastic self-consistent polycrystal model: FE simulations on Zr and low-carbon steel subjected to bending, stress-relaxation, and unloading. Jeong, Youngung; Jeon, Bohye; Tomé, Carlos N. International Journal of Plasticity, Vol. 147 https://doi.org/10.1016/j.ijplas.2021.103110	journal	December 2021
A comprehensive analysis of cermet design and thermal cyclic stability via elasto-viscoplastic crystal plasticity modeling Peterson, Glenn R.; Jeong, Youngung; Tomé, Carlos N. International Journal of Plasticity, Vol. 179 https://doi.org/10.1016/j.ijplas.2024.104032	journal	August 2024
Direct application of elasto-visco-plastic self-consistent crystal plasticity model to U-draw bending and springback of dual-phase high strength steel Jeon, Bohye; Lee, Shin-Yeong; Lee, Jinwoo International Journal of Plasticity, Vol. 181 https://doi.org/10.1016/j.ijplas.2024.104098	journal	October 2024
New robust self-consistent homogenization schemes of elasto-viscoplastic polycrystals Zecevic, Miroslav; Lebensohn, Ricardo A. International Journal of Solids and Structures, Vol. 202 https://doi.org/10.1016/j.ijsolstr.2020.05.032	journal	October 2020
On the evolution and modelling of Cube texture during dynamic recrystallisation of Ni–30Fe–Nb–C model alloy Saleh, Ahmed A.; Mannan, Parvez; Tomé, Carlos N. Journal of Alloys and Compounds, Vol. 748 https://doi.org/10.1016/j.jallcom.2018.03.031	journal	June 2018
Finite element analysis using elasto-visco-plastic self-consistent polycrystal model for E-form Mg sheet subjected to bending Jeon, Bohye; Kim, Min-Seong; Choi, Shi-Hoon Journal of Magnesium and Alloys, Vol. 11, Issue 4 https://doi.org/10.1016/j.jma.2022.10.017	journal	April 2023
Crystal plasticity finite element simulations on extruded Mg-10Gd rod with texture gradient Lee, Jaeseong; Steglich, Dirk; Jeong, Youngung Journal of Magnesium and Alloys, Vol. 12, Issue 8 https://doi.org/10.1016/j.jma.2024.08.009	journal	August 2024
A finite strain elastic–viscoplastic self-consistent model for polycrystalline materials Wang, H.; Wu, P. D.; Tomé, C. N. Journal of the Mechanics and Physics of Solids, Vol. 58, Issue 4 https://doi.org/10.1016/j.jmps.2010.01.004	journal	April 2010
Thermal ratcheting of uranium simulated with a thermo-elasto-visco-plastic self-consistent polycrystal model Jeong, Youngung; Tomé, Carlos N. Journal of Nuclear Materials, Vol. 597 https://doi.org/10.1016/j.jnucmat.2024.155159	journal	August 2024
A multiscale simulation framework of the accumulative roll bonding process accounting for texture evolution Prakash, A.; Nöhring, W. G.; Lebensohn, R. A. Materials Science and Engineering: A, Vol. 631 https://doi.org/10.1016/j.msea.2015.02.005	journal	April 2015
Modeling dynamic recrystallization of olivine aggregates deformed in simple shear Wenk, H. -R.; Tomé, C. N. Journal of Geophysical Research: Solid Earth, Vol. 104, Issue B11 https://doi.org/10.1029/1999JB900261	journal	November 1999
Self-consistent modelling of nonlinear visco-elastic polycrystals: An approximate scheme Turner, P. A.; Tomé, C. N.; Woo, C. H. Philosophical Magazine A, Vol. 70, Issue 4 https://doi.org/10.1080/01418619408242256	journal	October 1994
Comparison of different homogenization approaches for elastic–viscoplastic materials Mercier, S.; Molinari, A.; Berbenni, S. Modelling and Simulation in Materials Science and Engineering, Vol. 20, Issue 2 https://doi.org/10.1088/0965-0393/20/2/024004	journal	February 2012
Forming limit prediction using a self-consistent crystal plasticity framework: a case study for body-centered cubic materials Jeong, Youngung; Pham, Minh-Son; Iadicola, Mark Modelling and Simulation in Materials Science and Engineering, Vol. 24, Issue 5 https://doi.org/10.1088/0965-0393/24/5/055005	journal	May 2016
Extension of the visco-plastic self-consistent model to account for elasto-visco-plastic behavior using a perturbed visco-plastic approach Jeong, Youngung; Tomé, Carlos N. Modelling and Simulation in Materials Science and Engineering, Vol. 27, Issue 8 https://doi.org/10.1088/1361-651X/ab4b66	journal	October 2019
A dislocation density-based crystal plasticity constitutive model: comparison of VPSC effective medium predictions with ρ-CP finite element predictions Patra, Anirban; Tomé, Carlos N. Modelling and Simulation in Materials Science and Engineering, Vol. 32, Issue 4 https://doi.org/10.1088/1361-651X/ad3e99	journal	April 2024
Bounds and Self-Consistent Estimates for Creep of Polycrystalline Materials Hutchinson, J. W. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, Vol. 348, Issue 1652 https://doi.org/10.1098/rspa.1976.0027	journal	February 1976
Averaging Models for Heterogeneous Viscoplastic and Elastic Viscoplastic Materials Molinari, Alain Journal of Engineering Materials and Technology, Vol. 124, Issue 1 https://doi.org/10.1115/1.1421052	journal	June 2001

Similar Records

A thermodynamically consistent fractional visco-elasto-plastic model with memory-dependent damage for anomalous materials

Journal Article · 2021 · Computer Methods in Applied Mechanics and Engineering · OSTI ID:1776283

Suzuki, Jorge; Zhou, Yongtao; D’Elia, Marta; +1 more

A Themodynamically Consistent Fractional Visco-Elasto-Plastic Model with Memory-Dependent Damage for Anomalous Materials

Technical Report · 2019 · OSTI ID:1575111

Suzuki, Jorge L.; Zhou, Yongtao; D'Elia, Marta; +1 more

An elasto-plastic self-consistent model with hardening based on dislocation density, twinning and de-twinning: Application to strain path changes in HCP metals

Journal Article · 2015 · Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing · OSTI ID:1359574

Zecevic, Milovan; Knezevic, Marko; Beyerlein, Irene J.; +1 more

Title: A critical discussion of elasto-visco-plastic self-consistent (EVPSC) models

Citation Formats

References (38)

Similar Records

Related Subjects