Microstructure and mechanical properties of laser powder bed fusion Ti-6Al-4V after HIP treatments with varied temperatures and cooling rates

Derimow, Nicholas; Benzing, Jake T.; Joress, Howie; McDannald, Austin; Lu, Ping; DelRio, Frank W.; Moser, Newell; Connolly, Matthew J.; Saville, Alec I.; Kafka, Orion L.; Beamer, Chad; Fishel, Ryan; Sarker, Suchismita; Hadley, Chris; Hrabe, Nik

doi:10.1016/j.matdes.2024.113388

Title: Microstructure and mechanical properties of laser powder bed fusion Ti-6Al-4V after HIP treatments with varied temperatures and cooling rates

Journal Article · 01 November 2024 · Materials & Design

DOI: https://doi.org/10.1016/j.matdes.2024.113388 · OSTI ID:2473171

; Benzing, Jake T.; Joress, Howie; McDannald, Austin; Lu, Ping; DelRio, Frank W.; Moser, Newell; Connolly, Matthew J.; Saville, Alec I.; Kafka, Orion L.; Beamer, Chad; Fishel, Ryan; Sarker, Suchismita; Hadley, Chris; Hrabe, Nik

Not Available

View Journal Article

Cite

Export

Save

Sponsoring Organization:: USDOE

OSTI ID:: 2473171

Journal Information:: Materials & Design, Journal Name: Materials & Design Journal Issue: C Vol. 247; ISSN 0264-1275

Publisher:: ElsevierCopyright Statement

Country of Publication:: United Kingdom

Language:: English

References (102)

Role of Deformation Twinning on Strain Hardening in Cubic and Hexagonal Polycrystalline Metals Kalidindi, S. R.; Salem, A. A.; Doherty, R. D. Advanced Engineering Materials, Vol. 5, Issue 4 https://doi.org/10.1002/adem.200300320	journal	April 2003
Interstitial segregation and embrittlement in Ti-6Al-4V alloy Xu, Y. B.; Xu, Z. S. Journal of Materials Science, Vol. 25, Issue 9 https://doi.org/10.1007/BF00582469	journal	September 1990
Martensitic transformations in Ti-Mo alloys Davis, R.; Flower, H. M.; West, D. R. F. Journal of Materials Science, Vol. 14, Issue 3 https://doi.org/10.1007/BF00772735	journal	March 1979
Phase transformations and tensile properties of Ti-10V-2Fe-3AI Duerig, T. W.; Terlinde, G. T.; Williams, J. C. Metallurgical Transactions A, Vol. 11, Issue 12 https://doi.org/10.1007/BF02655118	journal	December 1980
Influence of texture on fatigue properties of Ti-6Al-4V Peters, M.; Gysler, A.; LÜtjering, G. Metallurgical and Materials Transactions A, Vol. 15, Issue 8 https://doi.org/10.1007/BF02657799	journal	August 1984
The effect of cooling conditions on the microstructure of rapidly solidified Ti-6Al-4V Broderick, T. F.; Jackson, A. G.; Jones, H. Metallurgical Transactions A, Vol. 16, Issue 11 https://doi.org/10.1007/BF02662396	journal	November 1985
Tempering behavior of orthorhombic martensite in titanium alloys Williams, James C.; Hickman, Brian S. Metallurgical Transactions, Vol. 1, Issue 9 https://doi.org/10.1007/BF03038403	journal	September 1970
Rapid Solidification Processing of Titanium Alloys Sastry, S. M. L.; Peng, T. C.; Meschter, Peter J. JOM, Vol. 35, Issue 9 https://doi.org/10.1007/BF03338360	journal	September 1983
Estimation of prediction error by using K-fold cross-validation Fushiki, Tadayoshi Statistics and Computing, Vol. 21, Issue 2 https://doi.org/10.1007/s11222-009-9153-8	journal	October 2009
Influence of microstructure on high-cycle fatigue of Ti-6Al-4V: Bimodal vs. lamellar structures Nalla, R. K.; Ritchie, R. O.; Boyce, B. L. Metallurgical and Materials Transactions A, Vol. 33, Issue 3 https://doi.org/10.1007/s11661-002-0160-z	journal	March 2002
Finite element modeling of the morphology of β to α phase transformation in Ti-6Al-4V alloy Katzarov, I.; Malinov, S.; Sha, W. Metallurgical and Materials Transactions A, Vol. 33, Issue 4 https://doi.org/10.1007/s11661-002-0204-4	journal	April 2002
Microstructure evolution during alpha-beta heat treatment of Ti-6Al-4V Semiatin, S. L.; Knisley, S. L.; Fagin, P. N. Metallurgical and Materials Transactions A, Vol. 34, Issue 10 https://doi.org/10.1007/s11661-003-0300-0	journal	October 2003
Modeling the tensile properties in β-processed α/β Ti alloys Kar, S.; Searles, T.; Lee, E. Metallurgical and Materials Transactions A, Vol. 37, Issue 3 https://doi.org/10.1007/s11661-006-0028-8	journal	March 2006
Strain hardening due to deformation twinning in α-titanium: Mechanisms Salem, A. A.; Kalidindi, S. R.; Doherty, R. D. Metallurgical and Materials Transactions A, Vol. 37, Issue 1 https://doi.org/10.1007/s11661-006-0171-2	journal	January 2006
Formation of Grain Boundary α in β Ti Alloys: Its Role in Deformation and Fracture Behavior of These Alloys Foltz, John W.; Welk, Brian; Collins, Peter C. Metallurgical and Materials Transactions A, Vol. 42, Issue 3 https://doi.org/10.1007/s11661-010-0322-3	journal	June 2010
Variant Selection During Cooling after Beta Annealing of Ti-6Al-4V Ingot Material Sargent, G. A.; Kinsel, K. T.; Pilchak, A. L. Metallurgical and Materials Transactions A, Vol. 43, Issue 10 https://doi.org/10.1007/s11661-012-1245-y	journal	June 2012
Effect of Process Variables on Transformation-Texture Development in Ti-6Al-4V Sheet Following Beta Heat Treatment Semiatin, S. L.; Kinsel, K. T.; Pilchak, A. L. Metallurgical and Materials Transactions A, Vol. 44, Issue 8 https://doi.org/10.1007/s11661-013-1735-6	journal	April 2013
On the Texture Formation of Selective Laser Melted Ti-6Al-4V Simonelli, Marco; Tse, Yau Yau; Tuck, Chris Metallurgical and Materials Transactions A, Vol. 45, Issue 6 https://doi.org/10.1007/s11661-014-2218-0	journal	February 2014
The Effect of Dissolved Nitrogen on the Fatigue Behavior of Ti-6Al-4V Collins, C. R.; Dear, F. F.; Rugg, D. Metallurgical and Materials Transactions A, Vol. 52, Issue 5 https://doi.org/10.1007/s11661-021-06147-2	journal	March 2021
Kinetically Induced Fine Secondary α-Ti Phase Formation in a Novel As-Cast Titanium Alloy Liang, Zhi; Miao, Jiashi; Huang, Xuejun Metallurgical and Materials Transactions A, Vol. 53, Issue 10 https://doi.org/10.1007/s11661-022-06775-2	journal	August 2022
Microstructures and Mechanical Properties of Ti6Al4V Parts Fabricated by Selective Laser Melting and Electron Beam Melting Rafi, H. K.; Karthik, N. V.; Gong, Haijun Journal of Materials Engineering and Performance, Vol. 22, Issue 12 https://doi.org/10.1007/s11665-013-0658-0	journal	August 2013
Specific heat treatment of selective laser melted Ti–6Al–4V for biomedical applications Huang, Qianli; Liu, Xujie; Yang, Xing Frontiers of Materials Science, Vol. 9, Issue 4 https://doi.org/10.1007/s11706-015-0315-7	journal	October 2015
Progress Towards Metal Additive Manufacturing Standardization to Support Qualification and Certification Seifi, Mohsen; Gorelik, Michael; Waller, Jess JOM, Vol. 69, Issue 3 https://doi.org/10.1007/s11837-017-2265-2	journal	February 2017
Defect, Microstructure, and Mechanical Property of Ti-6Al-4V Alloy Fabricated by High-Power Selective Laser Melting Cao, Sheng; Chen, Zhuoer; Lim, Chao Voon Samuel JOM, Vol. 69, Issue 12 https://doi.org/10.1007/s11837-017-2581-6	journal	September 2017
Oxidation in Reused Powder Bed Fusion Additive Manufacturing Ti-6Al-4V Feedstock: A Brief Review Derimow, Nicholas; Hrabe, Nikolas JOM, Vol. 73, Issue 11 https://doi.org/10.1007/s11837-021-04872-y	journal	October 2021
Review on volumetric energy density: influence on morphology and mechanical properties of Ti6Al4V manufactured via laser powder bed fusion Buhairi, Minhalina Ahmad; Foudzi, Farhana Mohd; Jamhari, Fathin Iliana Progress in Additive Manufacturing, Vol. 8, Issue 2, p. 265-283 https://doi.org/10.1007/s40964-022-00328-0	journal	July 2022
Young's modulus and damping of Ti6Al4V alloy as a function of heat treatment and oxygen concentration Lee, Y. T.; Welsch, G. Materials Science and Engineering: A, Vol. 128, Issue 1 https://doi.org/10.1016/0921-5093(90)90097-M	journal	August 1990
On the process of transition of the cubic-body-centered modification into the hexagonal-close-packed modification of zirconium Burgers, W. G. Physica, Vol. 1, Issue 7-12 https://doi.org/10.1016/S0031-8914(34)80244-3	journal	May 1934
Impact of texture on mechanical properties in an advanced titanium alloy Bache, M. R.; Evans, W. J. Materials Science and Engineering: A, Vol. 319-321 https://doi.org/10.1016/S0921-5093(00)02034-7	journal	December 2001
A study of active deformation systems in titanium alloys: dependence on alloy composition and correlation with deformation texture Zaefferer, S. Materials Science and Engineering: A, Vol. 344, Issue 1-2 https://doi.org/10.1016/S0921-5093(02)00421-5	journal	March 2003
Influence of processing on microstructure and mechanical properties of (α+β) titanium alloys Lütjering, G. Materials Science and Engineering: A, Vol. 243, Issue 1-2 https://doi.org/10.1016/S0921-5093(97)00778-8	journal	March 1998
Effect of phase transformation on texture formation in Ti-base alloys Divinski, S. V.; Dnieprenko, V. N.; Ivasishin, O. M. Materials Science and Engineering: A, Vol. 243, Issue 1-2 https://doi.org/10.1016/S0921-5093(97)00801-0	journal	March 1998
Phase transformations during cooling in α+β titanium alloys Ahmed, T.; Rack, H. J. Materials Science and Engineering: A, Vol. 243, Issue 1-2 https://doi.org/10.1016/S0921-5093(97)00802-2	journal	March 1998
Property optimization through microstructural control in titanium and aluminum alloys Lütjering, G. Materials Science and Engineering: A, Vol. 263, Issue 2 https://doi.org/10.1016/S0921-5093(98)01169-1	journal	May 1999
Strain hardening of titanium: role of deformation twinning Salem, Ayman A.; Kalidindi, Surya R.; Doherty, Roger D. Acta Materialia, Vol. 51, Issue 14 https://doi.org/10.1016/S1359-6454(03)00239-8	journal	August 2003
Additive manufacturing of strong and ductile Ti–6Al–4V by selective laser melting via in situ martensite decomposition Xu, W.; Brandt, M.; Sun, S. Acta Materialia, Vol. 85 https://doi.org/10.1016/j.actamat.2014.11.028	journal	February 2015
Micromechanical behavior and thermal stability of a dual-phase α+α’ titanium alloy produced by additive manufacturing de Formanoir, Charlotte; Martin, Guilhem; Prima, Frédéric Acta Materialia, Vol. 162 https://doi.org/10.1016/j.actamat.2018.09.050	journal	January 2019
Globularization using heat treatment in additively manufactured Ti-6Al-4V for high strength and toughness Sabban, Rushikesh; Bahl, Sumit; Chatterjee, Kaushik Acta Materialia, Vol. 162 https://doi.org/10.1016/j.actamat.2018.09.064	journal	January 2019
The influence of heat treatment on the microstructure and properties of HIPped Ti-6Al-4V Lu, Y.; Aristizabal, M.; Wang, X. Acta Materialia, Vol. 165 https://doi.org/10.1016/j.actamat.2018.12.025	journal	February 2019
In-situ observation of single variant α colony formation in Ti-6Al-4V Davis, A. E.; Donoghue, J.; Kennedy, J. R. Acta Materialia, Vol. 220 https://doi.org/10.1016/j.actamat.2021.117315	journal	November 2021
Fatigue of additive manufactured Ti-6Al-4V, Part I: The effects of powder feedstock, manufacturing, and post-process conditions on the resulting microstructure and defects Pegues, J. W.; Shao, S.; Shamsaei, N. International Journal of Fatigue, Vol. 132 https://doi.org/10.1016/j.ijfatigue.2019.105358	journal	March 2020
Fatigue of additive manufactured Ti-6Al-4V, Part II: The relationship between microstructure, material cyclic properties, and component performance Molaei, R.; Fatemi, A.; Sanaei, N. International Journal of Fatigue, Vol. 132 https://doi.org/10.1016/j.ijfatigue.2019.105363	journal	March 2020
Prediction of anisotropic LCF behavior for SLM Ti-6Al-4V considering the spatial orientation of defects Hu, Dianyin; Pan, Jinchao; Mi, Dong International Journal of Fatigue, Vol. 158 https://doi.org/10.1016/j.ijfatigue.2022.106734	journal	May 2022
Effect of heat treatment temperature and turning residual stresses on the plain and notch fatigue strength of Ti-6Al-4V additively manufactured via laser powder bed fusion Emanuelli, L.; Molinari, A.; Facchini, L. International Journal of Fatigue, Vol. 162 https://doi.org/10.1016/j.ijfatigue.2022.107009	journal	September 2022
Effect of HIP post-processing at 850 °C/200 MPa in the fatigue behavior of Ti-6Al-4V alloy fabricated by Selective Laser Melting Alegre, J. M.; Díaz, A.; García, R. International Journal of Fatigue, Vol. 163 https://doi.org/10.1016/j.ijfatigue.2022.107097	journal	October 2022
Investigation of fatigue behavior of laser powder bed fusion Ti-6Al-4V: Roles of heat treatment and microstructure Liu, Jianwen; Zhang, Kai; Liu, Jie International Journal of Fatigue, Vol. 176 https://doi.org/10.1016/j.ijfatigue.2023.107839	journal	November 2023
Microstructural effects on the rotating bending fatigue behavior of Ti–6Al–4V produced via laser powder bed fusion with novel heat treatments Derimow, Nicholas; Benzing, Jake T.; Newton, David International Journal of Fatigue, Vol. 185 https://doi.org/10.1016/j.ijfatigue.2024.108362	journal	August 2024
Laser powder bed fusion of Ti-6Al-4V parts: Thermal modeling and mechanical implications Masoomi, Mohammad; Thompson, Scott M.; Shamsaei, Nima International Journal of Machine Tools and Manufacture, Vol. 118-119 https://doi.org/10.1016/j.ijmachtools.2017.04.007	journal	August 2017
A microstructure-based porous crystal plasticity FE model for additively manufactured Ti-6Al-4V alloys Pinz, M.; Benzing, J. T.; Pilchak, A. International Journal of Plasticity, Vol. 153 https://doi.org/10.1016/j.ijplas.2022.103254	journal	June 2022
Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and mechanical properties Vrancken, Bey; Thijs, Lore; Kruth, Jean-Pierre Journal of Alloys and Compounds, Vol. 541 https://doi.org/10.1016/j.jallcom.2012.07.022	journal	November 2012
Effect of subtransus heat treatment on the microstructure and mechanical properties of additively manufactured Ti-6Al-4V alloy Zhang, Xiang-Yu; Fang, Gang; Leeflang, Sander Journal of Alloys and Compounds, Vol. 735 https://doi.org/10.1016/j.jallcom.2017.11.263	journal	February 2018
Role of martensite decomposition in tensile properties of selective laser melted Ti-6Al-4V Cao, Sheng; Chu, Ruikun; Zhou, Xigen Journal of Alloys and Compounds, Vol. 744 https://doi.org/10.1016/j.jallcom.2018.02.111	journal	May 2018
Effect of strain reversal on the stress-induced martensitic transformation and tensile properties of a metastable β titanium alloy Ma, Xinkai; Li, Fuguo; Fang, Xiaotian Journal of Alloys and Compounds, Vol. 784 https://doi.org/10.1016/j.jallcom.2019.01.010	journal	May 2019
On the role of cooling rate and temperature in forming twinned α’ martensite in Ti–6Al–4V Cao, Sheng; Zhang, Bohua; Yang, Yi Journal of Alloys and Compounds, Vol. 813 https://doi.org/10.1016/j.jallcom.2019.152247	journal	January 2020
An in-situ neutron diffraction investigation of martensitic transformation in a metastable β Ti-10V-2Fe-3Al alloy during uniaxial tension Pinilla Ducreux, Carla Isabel; Saleh, Ahmed A.; Gazder, Azdiar A. Journal of Alloys and Compounds, Vol. 869 https://doi.org/10.1016/j.jallcom.2021.159301	journal	July 2021
Heat treatment of Ti-6Al-4V alloy manufactured by laser-based powder-bed fusion: Process, microstructures, and mechanical properties correlations Etesami, Seyed Alireza; Fotovvati, Behzad; Asadi, Ebrahim Journal of Alloys and Compounds, Vol. 895 https://doi.org/10.1016/j.jallcom.2021.162618	journal	February 2022
On the existence of orthorhombic martensite in a near-α titanium base alloy used for additive manufacturing Fleißner-Rieger, Christian; Tunes, Matheus Araujo; Gammer, Christoph Journal of Alloys and Compounds, Vol. 897 https://doi.org/10.1016/j.jallcom.2021.163155	journal	March 2022
Unusual stress-induced martensite transformation in Ti-6Al-4V alloy enabled by solution treatment in the lower α+β regime Zhou, Xuefeng; Li, Yulin; Han, Ziru Journal of Alloys and Compounds, Vol. 956 https://doi.org/10.1016/j.jallcom.2023.170330	journal	September 2023
Correlation between microstructures and mechanical properties under tensile and compression tests of heat-treated Ti-6Al–4 V ELI alloy produced by additive manufacturing for biomedical applications Longhitano, Guilherme Arthur; Larosa, Maria Aparecida; Jardini, André Luiz Journal of Materials Processing Technology, Vol. 252 https://doi.org/10.1016/j.jmatprotec.2017.09.022	journal	February 2018
A constitutive model for the uniaxial tensile plastic behavior of metals based on the instantaneous strain-hardening exponent Gonoring, Tiago Bristt; Gonçalves de Miranda Salustre, Mariane; Caetano, Gabriela Aksascki Journal of Materials Research and Technology, Vol. 20 https://doi.org/10.1016/j.jmrt.2022.07.189	journal	September 2022
Targeted heat treatment of additively manufactured Ti-6Al-4V for controlled formation of Bi-lamellar microstructures Funch, Cecilie V.; Palmas, Alessandro; Somlo, Kinga Journal of Materials Science & Technology, Vol. 81 https://doi.org/10.1016/j.jmst.2021.01.004	journal	August 2021
Quantification of Alpha Lath in Ti-6Al-4V using OpenCV Karra, Venkata Satya Surya Amaranth; Verma, Amit K.; Guzel, Ali Materials Characterization, Vol. 186 https://doi.org/10.1016/j.matchar.2022.111802	journal	April 2022
New methods for automatic quantification of microstructural features using digital image processing Campbell, Andrew; Murray, Paul; Yakushina, Evgenia Materials & Design, Vol. 141 https://doi.org/10.1016/j.matdes.2017.12.049	journal	March 2018
The role of defects and critical pore size analysis in the fatigue response of additively manufactured IN718 via crystal plasticity Prithivirajan, Veerappan; Sangid, Michael D. Materials & Design, Vol. 150 https://doi.org/10.1016/j.matdes.2018.04.022	journal	July 2018
Hot isostatic pressing (HIP) to achieve isotropic microstructure and retain as-built strength in an additive manufacturing titanium alloy (Ti-6Al-4V) Benzing, Jake; Hrabe, Nik; Quinn, Timothy Materials Letters, Vol. 257 https://doi.org/10.1016/j.matlet.2019.126690	journal	December 2019
A new generation of HIP Nickels, Liz Metal Powder Report, Vol. 71, Issue 3 https://doi.org/10.1016/j.mprp.2016.04.049	journal	May 2016
Effects of working, heat treatment, and aging on microstructural evolution and crystallographic texture of α, α′, α″ and β phases in Ti–6Al–4V wire Zeng, L.; Bieler, T. R. Materials Science and Engineering: A, Vol. 392, Issue 1-2 https://doi.org/10.1016/j.msea.2004.09.072	journal	February 2005
Development of methods for the quantification of microstructural features in α+β-processed α/β titanium alloys Collins, P. C.; Welk, B.; Searles, T. Materials Science and Engineering: A, Vol. 508, Issue 1-2 https://doi.org/10.1016/j.msea.2008.12.038	journal	May 2009
Room-temperature ductility of Ti–6Al–4V alloy with α′ martensite microstructure Matsumoto, Hiroaki; Yoneda, Hiroshi; Sato, Kazuhisa Materials Science and Engineering: A, Vol. 528, Issue 3 https://doi.org/10.1016/j.msea.2010.10.070	journal	January 2011
Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti–6Al–4V Simonelli, M.; Tse, Y. Y.; Tuck, C. Materials Science and Engineering: A, Vol. 616 https://doi.org/10.1016/j.msea.2014.07.086	journal	October 2014
Developing a phenomenological equation to predict yield strength from composition and microstructure in β processed Ti-6Al-4V Ghamarian, I.; Hayes, B.; Samimi, P. Materials Science and Engineering: A, Vol. 660 https://doi.org/10.1016/j.msea.2016.02.052	journal	April 2016
In-situ residual stress reduction, martensitic decomposition and mechanical properties enhancement through high temperature powder bed pre-heating of Selective Laser Melted Ti6Al4V Ali, Haider; Ma, Le; Ghadbeigi, Hassan Materials Science and Engineering: A, Vol. 695 https://doi.org/10.1016/j.msea.2017.04.033	journal	May 2017
Bi-lamellar microstructure in Ti–6Al–4V: Microstructure evolution and mechanical properties Chong, Yan; Bhattacharjee, Tilak; Tsuji, Nobuhiro Materials Science and Engineering: A, Vol. 762 https://doi.org/10.1016/j.msea.2019.138077	journal	August 2019
Effects of solution-aging treatments on microstructure features, mechanical properties and damage behaviors of additive manufactured Ti–6Al–4V alloy Liu, Zheng; Zhao, Zibo; Liu, Jianrong Materials Science and Engineering: A, Vol. 800 https://doi.org/10.1016/j.msea.2020.140380	journal	January 2021
Thermo-hydrogen refinement of microstructure to improve mechanical properties of Ti–6Al–4V fabricated via laser powder bed fusion Knezevic, Marko; Ghorbanpour, Saeede; Ferreri, Nicholas C. Materials Science and Engineering: A, Vol. 809 https://doi.org/10.1016/j.msea.2021.140980	journal	March 2021
The influence of microstructural texture and prior beta grain recrystallisation on the deformation behaviour of laser powder bed fusion produced Ti–6Al–4V Ter Haar, Gerrit Matthys; Becker, Thorsten Hermann Materials Science and Engineering: A, Vol. 814 https://doi.org/10.1016/j.msea.2021.141185	journal	May 2021
Material modeling of Ti–6Al–4V alloy processed by laser powder bed fusion for application in macro-scale process simulation Bartsch, Katharina; Herzog, Dirk; Bossen, Bastian Materials Science and Engineering: A, Vol. 814 https://doi.org/10.1016/j.msea.2021.141237	journal	May 2021
Strength enhancement of a bi-lamellar PM Ti–6Al–4V alloy without sacrificing ductility by Al partitioning and twinning-induced plasticity effect Meng, Lei; Zhang, Youyun; Zang, Mengchao Materials Science and Engineering: A, Vol. 832 https://doi.org/10.1016/j.msea.2021.142368	journal	January 2022
Deformation induced nanoscale twinning improves strength and ductility in additively manufactured titanium alloys Wang, Pan; Tan, Xipeng; Nai, Mui Ling Sharon Materials Science and Engineering: A, Vol. 833 https://doi.org/10.1016/j.msea.2021.142568	journal	January 2022
Effects of local processing parameters on microstructure, texture, and mechanical properties of electron beam powder bed fusion manufactured Ti–6Al–4V Schwalbach, Edwin J.; Benzing, Jake T.; Sinha, Vikas Materials Science and Engineering: A, Vol. 855 https://doi.org/10.1016/j.msea.2022.143853	journal	October 2022
Influence of phase morphology, static recrystallization, and crystallographic texture on room temperature tensile properties of Ti–6Al–4V alloy: Comparison between post-tested equiaxed, bimodal, and lamellar microstructures Dixit, Shubhashis; Dash, Barun Bharadwaj; Kumar, Deepak Materials Science and Engineering: A, Vol. 873 https://doi.org/10.1016/j.msea.2023.144990	journal	May 2023
Achieving bi-lamellar microstructure with both high tensile strength and large ductility in Ti–6Al–4V alloy by novel thermomechanical processing Chong, Yan; Bhattacharjee, Tilak; Yi, Jangho Materialia, Vol. 8 https://doi.org/10.1016/j.mtla.2019.100479	journal	December 2019
Damage tolerant design of additively manufactured metallic components subjected to cyclic loading: State of the art and challenges Zerbst, Uwe; Bruno, Giovanni; Buffière, Jean-Yves Progress in Materials Science, Vol. 121 https://doi.org/10.1016/j.pmatsci.2021.100786	journal	August 2021
Porosity regrowth during heat treatment of hot isostatically pressed additively manufactured titanium components Tammas-Williams, S.; Withers, P. J.; Todd, I. Scripta Materialia, Vol. 122 https://doi.org/10.1016/j.scriptamat.2016.05.002	journal	September 2016
Grain boundary α-phase precipitation and coarsening: Comparing laser powder bed fusion with as-cast Ti-6Al-4V Liu, Jianwen; Zhang, Kai; Yang, Yi Scripta Materialia, Vol. 207 https://doi.org/10.1016/j.scriptamat.2021.114261	journal	January 2022
Certification of Standard Reference Material 660c for powder diffraction Black, David R.; Mendenhall, Marcus H.; Brown, Craig M. Powder Diffraction, Vol. 35, Issue 1 https://doi.org/10.1017/S0885715620000068	journal	January 2020
The Titanium–Niobium System Brown, A. R. G.; Clark, D.; Eastabrook, J. Nature, Vol. 201, Issue 4922 https://doi.org/10.1038/201914a0	journal	February 1964
Principal component analysis Greenacre, Michael; Groenen, Patrick J. F.; Hastie, Trevor Nature Reviews Methods Primers, Vol. 2, Issue 1 https://doi.org/10.1038/s43586-022-00184-w	journal	December 2022
Use of Rietveld refinement to fit a hexagonal crystal structure in the presence of elastic and plastic anisotropy Daymond, M. R.; Bourke, M. A. M.; Von Dreele, R. B. Journal of Applied Physics, Vol. 85, Issue 2 https://doi.org/10.1063/1.369154	journal	January 1999
A strategy to improve the work-hardening behavior of Ti–6Al–4V parts produced by additive manufacturing de Formanoir, Charlotte; Brulard, Alice; Vivès, Solange Materials Research Letters, Vol. 5, Issue 3 https://doi.org/10.1080/21663831.2016.1245681	journal	October 2016
Demonstrating a duplex TRIP/TWIP titanium alloy via the introduction of metastable retained β-phase Sesha, Karri Sri Naga; Yamanaka, Kenta; Mori, Manami Materials Research Letters, Vol. 10, Issue 11 https://doi.org/10.1080/21663831.2022.2096419	journal	July 2022
Methods for obtaining the strain-free lattice parameter when using diffraction to determine residual stress Withers, P. J.; Preuss, M.; Steuwer, A. Journal of Applied Crystallography, Vol. 40, Issue 5 https://doi.org/10.1107/S0021889807030269	journal	September 2007
The fast azimuthal integration Python library: pyFAI Ashiotis, Giannis; Deschildre, Aurore; Nawaz, Zubair Journal of Applied Crystallography, Vol. 48, Issue 2 https://doi.org/10.1107/S1600576715004306	journal	March 2015
Distribution of Membrane Thickness Determined By Lineal Analysis Gundersen, H. J. G.; Jensen, T. B.; Østerby, R. Journal of Microscopy, Vol. 113, Issue 1 https://doi.org/10.1111/j.1365-2818.1978.tb00091.x	journal	May 1978
Rapid solidification processing of titanium alloys Suryanarayana, C.; Froes, F. H.; Rowe, R. G. International Materials Reviews, Vol. 36, Issue 1 https://doi.org/10.1179/imr.1991.36.1.85	journal	January 1991
Modeling and Optimization Approaches of Laser-Based Powder-Bed Fusion Process for Ti-6Al-4V Alloy Fotovvati, Behzad; Balasubramanian, Madhusudhanan; Asadi, Ebrahim Coatings, Vol. 10, Issue 11 https://doi.org/10.3390/coatings10111104	journal	November 2020
Inducing Stable α + β Microstructures during Selective Laser Melting of Ti-6Al-4V Using Intensified Intrinsic Heat Treatments Barriobero-Vila, Pere; Gussone, Joachim; Haubrich, Jan Materials, Vol. 10, Issue 3 https://doi.org/10.3390/ma10030268	journal	March 2017
Residual Lattice Strain and Phase Distribution in Ti-6Al-4V Produced by Electron Beam Melting Maimaitiyili, Tuerdi; Woracek, Robin; Neikter, Magnus Materials, Vol. 12, Issue 4 https://doi.org/10.3390/ma12040667	journal	February 2019
Additive Manufacturing of AlSi10Mg and Ti6Al4V Lightweight Alloys via Laser Powder Bed Fusion: A Review of Heat Treatments Effects Ghio, Emanuele; Cerri, Emanuela Materials, Vol. 15, Issue 6 https://doi.org/10.3390/ma15062047	journal	March 2022
Effect of Heat Treatment on the Microstructure and Mechanical Properties of Selective Laser-Melted Ti64 and Ti-5Al-5Mo-5V-1Cr-1Fe Bai, Hongjie; Deng, Hao; Chen, Longqing Metals, Vol. 11, Issue 4 https://doi.org/10.3390/met11040534	journal	March 2021
A Review of Deformation Mechanisms, Compositional Design, and Development of Titanium Alloys with Transformation-Induced Plasticity and Twinning-Induced Plasticity Effects Fu, Yu; Gao, Yue; Jiang, Wentao Metals, Vol. 14, Issue 1 https://doi.org/10.3390/met14010097	journal	January 2024
scikit-image: image processing in Python van der Walt, Stéfan; Schönberger, Johannes L.; Nunez-Iglesias, Juan PeerJ, Vol. 2 https://doi.org/10.7717/peerj.453	journal	January 2014

Similar Records

Understanding process-microstructure-property relationships in laser powder bed fusion of non-spherical Ti-6Al-4V powder

Journal Article · 2023 · Materials Characterization · OSTI ID:1983730

Asherloo, Mohammadreza; Hwang, Junghyun; Leroux, Ryan; +5 more

Precipitation hardening of laser powder bed fusion Ti-6Al-4V

Journal Article · 2024 · Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing · OSTI ID:2478617

Derimow, Nicholas; Benzing, Jake T.; Garcia, Jacob; +6 more

Fatigue performance of laser powder bed fusion hydride-dehydride Ti-6Al-4V powder

Journal Article · 2022 · Additive Manufacturing · OSTI ID:1893598

Asherloo, Mohammadreza; Wu, Ziheng; Heim, Mike; +4 more

Title: Microstructure and mechanical properties of laser powder bed fusion Ti-6Al-4V after HIP treatments with varied temperatures and cooling rates

Citation Formats

References (102)

Similar Records

Related Subjects