DOE PAGES title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Quantifying the Temperature Dependence of the Multi-Species, Multi-Reaction Model: Part II. Estimation of Entropy Coefficient for Meso-Carbon Micro-Bead Graphite

Journal Article · · Journal of the Electrochemical Society

In Part 1 of this paper, the temperature impact on the Multi-Species, Multi Reaction (MSMR) model was studied. This was accomplished by acquiring data from slow rate lithiation and delithiation of a meso-carbon micro-bead (MCMB) graphite. Through this analysis, the temperature impact on the total fraction of available host sites in a particular MSMR gallery (X j ), the impact on the reference potential ( U j o ), and the impact on the parameter detailing the deviation from Nernstian behavior ( ω j ) was determined. Here, the intercalation material is discussed, compared to traditional methods of acquiring the entropy coefficient, and comparison is made to previous mathematical estimates. Some of the challenges in using temperature dependent constant rate charge and discharge data as compared to the potentiodynamic entropy coefficient calculation method are also discussed, and a recommendation for future applications is proposed.

Sponsoring Organization:
USDOE
Grant/Contract Number:
FE0032144
OSTI ID:
2459353
Journal Information:
Journal of the Electrochemical Society, Journal Name: Journal of the Electrochemical Society Journal Issue: 10 Vol. 171; ISSN 0013-4651
Publisher:
The Electrochemical SocietyCopyright Statement
Country of Publication:
United States
Language:
English

References (81)

The entropy and enthalpy of lithium intercalation into graphite journal June 2003
Comparison between computer simulations and experimental data for high-rate discharges of plastic lithium-ion batteries journal June 2000
Measurement of heat generation rate and heat sources of pouch type Li-ion cells journal May 2021
Hybridized time-frequency method for the measurement of entropy coefficient of lithium-ion battery journal December 2020
Quantifying the temperature distribution and thermal characteristics of a 4.35 V LiCoO2/graphite pouch cell by modeling and experiments journal January 2021
Thermal characterization of a high-power lithium-ion battery: Potentiometric and calorimetric measurement of entropy changes journal November 2013
Electrochemical-thermal P2D aging model of a LiCoO2/graphite cell: Capacity fade simulations journal December 2018
Review of models for predicting the cycling performance of lithium ion batteries journal June 2006
Mathematical modeling of a lithium ion battery with thermal effects in COMSOL Inc. Multiphysics (MP) software journal July 2011
Heat loss distribution: Impedance and thermal loss analyses in LiFePO4/graphite 18650 electrochemical cell journal October 2016
Modeling and simulation of inhomogeneities in a 18650 nickel-rich, silicon-graphite lithium-ion cell during fast charging journal February 2019
Measurement of two-dimensional heat generation rate of pouch type lithium-ion battery using a multifunctional calorimeter journal June 2022
Characterization and analysis of the effect of pressure on the performance of a large format NMC/C lithium-ion battery journal July 2023
Experimental studies of effects of temperature gradients on performance of pouch type large format NMC/C lithium-ion battery journal December 2023
The influence of surface inhomogeneity on the overcharge and lithium plating of graphite electrodes journal December 2019
Entropy Changes Due to Structural Transformation in the Graphite Anode and Phase Change of the LiCoO[sub 2] Cathode journal January 2000
Electrochemical and Thermal Characterization of Battery Modules Commensurate with Electric Vehicle Integration journal January 2002
Electrochemical Analysis of Lithiated Graphite Anodes journal January 2003
Simulation and Optimization of the Dual Lithium Ion Insertion Cell journal January 1994
Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell journal January 1993
Three-Dimensional Modeling of Electrochemical Performance and Heat Generation of Lithium-Ion Batteries in Tabbed Planar Configurations journal January 2011
The Surface Cell Cooling Coefficient: A Standard to Define Heat Rejection from Lithium Ion Battery Pouch Cells journal January 2020
Capacity Recovery Effect in Commercial LiFePO4 / Graphite Cells journal January 2020
Accounting for Non-Ideal, Lithiation-Based Active Material Volume Change in Mechano-Electrochemical Pouch Cell Simulation journal January 2020
Experimental and Theoretical Examination of Low-Current Overcharge at Lithiated-Graphite Porous Electrodes journal January 2020
Probing Heterogeneity in Li-Ion Batteries with Coupled Multiscale Models of Electrochemistry and Thermal Transport using Tomographic Domains journal January 2020
Analysis of the Heat Generation Rate of Lithium-Ion Battery Using an Electrochemical Thermal Model journal August 2020
Review—Lithium Plating Detection Methods in Li-Ion Batteries journal December 2020
Modeling Electrochemical Transport within a Three-Electrode System journal January 2021
Isothermal Calorimetry Evaluation of Metallurgical Silicon as a Negative Electrode Material for Li-Ion Batteries journal March 2021
Slow Current or Potential Scanning of Battery Porous Electrodes: Generalized Perturbation Solution and the Merits of Sinusoidal Current Cycling journal May 2021
Review—Reversible Heat Effects in Cells Relevant for Lithium-Ion Batteries journal May 2021
Implementation of a Physics-Based Model for Half-Cell Open-Circuit Potential and Full-Cell Open-Circuit Voltage Estimates: Part I. Processing Half-Cell Data journal July 2021
Entropy Measurements of Li-Ion Battery Cells with Li- and Mn-Rich Layered Transition Metal Oxides via Linear Temperature Variation journal December 2021
A Mechano-Electrochemical Battery Model that Accounts for Preferential Lithiation Inside Blended Silicon Graphite (Si/C) Anodes journal February 2022
Low Error Estimation of Half-Cell Thermodynamic Parameters from Whole-Cell Li-Ion Battery Experiments: Physics-Based Model Formulation, Experimental Demonstration, and an Open Software Tool journal March 2022
Modeling and Analysis of Heat Generation Rate of a Large Format Pouch-Type Lithium-Ion Battery Considering Degradation journal July 2022
Reduced Order Models Derived from Perturbation Solutions and Applied to a Lithium Ion Intercalation Electrode journal July 2022
Cell Discharge Testing to Calibrate a Positive-Electrode Open-Circuit-Potential Model for Lithium-Ion Cells journal July 2022
Time-Resolved Electrochemical Heat Flow Calorimetry for the Analysis of Highly Dynamic Processes in Lithium-Ion Batteries journal August 2022
Modeling Reversible Expansion of Porous Electrodes in Si/NMC Cells within the Framework of Multi-Species, Multi-Reaction Theory journal November 2022
Thermal Investigation of Cylindrical Lithium-ion Batteries for Different Loading using Experimental and Numerical Techniques journal December 2022
Efficient Reformulation of Linear and Nonlinear Solid-Phase Diffusion in Lithium-ion Battery Models using Symmetric Polynomials: Mass Conservation and Computational Efficiency journal January 2023
Heat Generation during the First Activation Cycle of Li-Ion Batteries with Li- and Mn-Rich Layered Oxides Measured by Isothermal Micro-Calorimetry journal May 2023
Isothermal Microcalorimetric Analysis of Li/CFx Battery Discharge journal June 2023
Leveraging Molecular Dynamics to Improve Porous Electrode Theory Modeling Predictions of Lithium-Ion Battery Cells journal August 2023
Quantifying Aging-Induced Irreversible Volume Change of Porous Electrodes journal October 2023
Initial Current Discrepancy in Simulating Lithium-Ion Battery Packs - Resolution from Dr. Ralph White’s Analytical Approach journal October 2023
From Atoms to Wheels: The Role of Multi-Scale Modeling in the Future of Transportation Electrification journal November 2023
Consistently Tuned Battery Lifetime Predictive Model of Capacity Loss, Resistance Increase, and Irreversible Thickness Growth journal January 2024
Isothermal Microcalorimetry Analysis of Li/β-MnO2 Discharge journal January 2024
Application of the Multi-Species, Multi-Reaction Model to Coal-Derived Graphite for Lithium-Ion Batteries journal February 2024
Electrochemical and Thermal Modeling for the Fast-Charge of Lithium-Ion Batteries with Cocurrent and Countercurrent Tab Connections and the Assessment of Li Plating journal May 2024
Mathematical Model for a Lithium-Ion Battery with a SiO/Graphite Blended Electrode Based on a Reduced Order Model Derived Using Perturbation Theory journal May 2024
Parameter Regression for Porous Electrodes Employed in Lithium-Ion Batteries and Application to Ni0.89Co0.05Mn0.05Al0.01O2 journal August 2024
Modeling Rate Dependent Volume Change in Porous Electrodes in Lithium-Ion Batteries journal July 2024
Modeling Overcharge at Graphite Electrodes: Plating and Dissolution of Lithium journal September 2019
Multi-Species, Multi-Reaction Model for Porous Intercalation Electrodes: Part II. Model-Experiment Comparisons for Linear-Sweep Voltammetry of Spinel Lithium Manganese Oxide Electrodes journal January 2019
Modeling and Simulation of Lithium-Ion Batteries from a Systems Engineering Perspective journal January 2012
The Cell Cooling Coefficient: A Standard to Define Heat Rejection from Lithium-Ion Batteries journal January 2019
Three-Dimensional Modeling of Electrochemical Performance and Heat Generation of Spirally and Prismatically Wound Lithium-Ion Batteries journal January 2013
Modeling Volume Change due to Intercalation into Porous Electrodes journal January 2014
Analysis of Capacity Fade from Entropic Heat Coefficient of Li[NixCoyMnz]O2/Graphite Lithium Ion Battery journal January 2016
Thermodynamic Model for Substitutional Materials: Application to Lithiated Graphite, Spinel Manganese Oxide, Iron Phosphate, and Layered Nickel-Manganese-Cobalt Oxide journal January 2017
Surface Cooling Causes Accelerated Degradation Compared to Tab Cooling for Lithium-Ion Pouch Cells journal January 2016
How to Cool Lithium Ion Batteries: Optimising Cell Design using a Thermally Coupled Model journal January 2019
Modeling Volume Change in Dual Insertion Electrodes journal January 2017
Electrochemical-Thermal Modeling to Evaluate Battery Thermal Management Strategies journal November 2014
Electrochemical-Thermal Modeling to Evaluate Battery Thermal Management Strategies: II. Edge and Internal Cooling journal November 2014
Formulation for the Treatment of Multiple Electrochemical Reactions and Associated Speciation for the Lithium-Silicon Electrode journal November 2015
Modeling Battery Performance Due to Intercalation Driven Volume Change in Porous Electrodes journal January 2017
Thermal Effect of Cooling the Cathode Grid Tabs of a Lithium-Ion Pouch Cell journal January 2014
Extreme Fast Charge Challenges for Lithium-Ion Battery: Variability and Positive Electrode Issues journal January 2019
Multi-Species, Multi-Reaction Model for Porous Intercalation Electrodes: Part I. Model Formulation and a Perturbation Solution for Low-Scan-Rate, Linear-Sweep Voltammetry of a Spinel Lithium Manganese Oxide Electrode journal January 2018
Entropy Coefficient of a Blended Electrode in a Lithium-Ion Cell journal January 2015
The Influence of Cell Temperature on the Entropic Coefficient of a Lithium Iron Phosphate (LFP) Pouch Cell journal October 2013
The Effect of Volume Change on the Accessible Capacities of Porous Silicon-Graphite Composite Anodes journal January 2019
Model of Lithium Intercalation into Graphite by Potentiometric Analysis with Equilibrium and Entropy Change Curves of Graphite Electrode journal January 2018
Towards Understanding Heat Generation Characteristics of Li-Ion Batteries by Calorimetry, Impedance, and Potentiometry Studies journal January 2017
Electrochemical-Thermal Modeling of Large-Format, Thin-Film, Lithium-Ion Batteries with Cocurrent and Countercurrent Tab Connections Using a Reduced-Order Model journal October 2023
Quantifying the Temperature Dependence of the Multi-Species, Multi-Reaction Model. Part 1: Parameterization for a Meso-Carbon Micro-Bead Graphite journal October 2024