3D printed porous silicone polymer composites using table salt as a sacrificial template

Adhikari, Santosh; Torres, Xavier M.; Stockdale, John R.; Legett, Shelbie A.; Bezek, Lindsey B.; Guajardo, Jesus A.; Pacheco, Adam; Ramasamy, Karthik; Benedikt, Bart; Lewis, Matthew; Labouriau, Andrea

doi:10.1039/D4MA00457D

Title: 3D printed porous silicone polymer composites using table salt as a sacrificial template

Journal Article · 14 October 2024 · Materials Advances

DOI: https://doi.org/10.1039/D4MA00457D · OSTI ID:2447484

^[1];

^[1]; Legett, Shelbie A. ^[1];

^[1]; Guajardo, Jesus A. ^[1]; Pacheco, Adam ^[1]; Ramasamy, Karthik ^[2]; Benedikt, Bart ^[3]; Lewis, Matthew ^[3]; Labouriau, Andrea ^[1]

C-CDE: Chemical Diagnostics and Engineering, Los Alamos National Laboratory, Los Alamos, NM 87545, USA
SIGMA-1: Fabrication Manufacturing Science, Los Alamos National Laboratory, Los Alamos, NM 87545, USA
W-13: Advanced Engineering Analysis, Los Alamos National Laboratory, Los Alamos, NM 87545, USA

The incorporation of different functional fillers into the DIW composite resin can expand the functionality of 3D printed porous materials for different applications.

View Journal Article

Cite

Export

Save

Sponsoring Organization:: USDOE

OSTI ID:: 2447484

Journal Information:: Materials Advances, Journal Name: Materials Advances Journal Issue: 20 Vol. 5; ISSN MAADC9; ISSN 2633-5409

Publisher:: Royal Society of Chemistry (RSC)Copyright Statement

Country of Publication:: United Kingdom

Language:: English

References (27)

3D‐Printed Silicone Materials with Hydrogen Getter Capability Ortiz‐Acosta, Denisse; Moore, Tanya; Safarik, Douglas J. Advanced Functional Materials, Vol. 28, Issue 17 https://doi.org/10.1002/adfm.201707285	journal	March 2018
3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam Chen, Qiyi; Zhao, Jiayu; Ren, Jingbo Advanced Functional Materials, Vol. 29, Issue 23 https://doi.org/10.1002/adfm.201900469	journal	April 2019
Preparation of Porous Poly(dimethylsiloxane)-Based Honeycomb Materials with Hierarchal Surface Features and Their Use as Soft-Lithography Templates Connal, L. A.; Qiao, G. G. Advanced Materials, Vol. 18, Issue 22 https://doi.org/10.1002/adma.200600982	journal	November 2006
Porous Polymers as Multifunctional Material Platforms toward Task-Specific Applications Wu, Jinlun; Xu, Fei; Li, Shimei Advanced Materials, Vol. 31, Issue 4 https://doi.org/10.1002/adma.201802922	journal	October 2018
Facile Preparation of the Porous PDMS Oil‐Absorbent for Oil/Water Separation Yu, Cunlong; Yu, Cunming; Cui, Liying Advanced Materials Interfaces, Vol. 4, Issue 3 https://doi.org/10.1002/admi.201600862	journal	December 2016
Boron‐polymer composites engineered for compression molding, foaming, and additive manufacturing Stockdale, John R.; Legett, Shelbie A.; Torres, Xavier M. Journal of Applied Polymer Science, Vol. 141, Issue 16 https://doi.org/10.1002/app.55236	journal	January 2024
Constitutive modeling of porous hyperelastic materials Danielsson, M.; Parks, D. M.; Boyce, M. C. Mechanics of Materials, Vol. 36, Issue 4 https://doi.org/10.1016/S0167-6636(03)00064-4	journal	April 2004
Prevailing conjugated porous polymers for electrochemical energy storage and conversion: Lithium-ion batteries, supercapacitors and water-splitting Zhang, Boying; Wang, Wenbo; Liang, Linan Coordination Chemistry Reviews, Vol. 436 https://doi.org/10.1016/j.ccr.2021.213782	journal	June 2021
Synthesis and characterization of hierarchical porous structure of polydimethylsiloxane (PDMS) sheets via two-step phase separation method Abshirini, Mohammad; Saha, Mrinal C.; Cengiz Altan, M. Materials & Design, Vol. 212 https://doi.org/10.1016/j.matdes.2021.110194	journal	December 2021
Polymer Framework with Continuous Pores for Hydrogen Getters: Molding and a Boost in Getter Rate Dong, Hui; Wang, Yingying; Fu, Hao ACS Applied Polymer Materials, Vol. 2, Issue 8 https://doi.org/10.1021/acsapm.0c00391	journal	June 2020
Rapid One Step Fabrication of Hydrophilic Hierarchical Porous PDMS with Negative Piezopermittivity for Sensing and Energy Storage Applications Parameswaran, Chithra; Chaudhary, Raghvendra Pratap; Hosangadi Prutvi, Sagar ACS Applied Polymer Materials, Vol. 4, Issue 3 https://doi.org/10.1021/acsapm.1c00593	journal	February 2022
Preparation of Microporous Silicone Rubber Membrane with Tunable Pore Size via Solvent Evaporation-Induced Phase Separation Zhao, Jian; Luo, Gaoxing; Wu, Jun ACS Applied Materials & Interfaces, Vol. 5, Issue 6 https://doi.org/10.1021/am302929c	journal	March 2013
Porous Polymer Networks: Synthesis, Porosity, and Applications in Gas Storage/Separation Lu, Weigang; Yuan, Daqiang; Zhao, Dan Chemistry of Materials, Vol. 22, Issue 21, p. 5964-5972 https://doi.org/10.1021/cm1021068	journal	November 2010
Design and Preparation of Porous Polymers Wu, Dingcai; Xu, Fei; Sun, Bin Chemical Reviews, Vol. 112, Issue 7 https://doi.org/10.1021/cr200440z	journal	April 2012
Extraordinary Capability for Water Treatment Achieved by a Perfluorous Conjugated Microporous Polymer Yang, Rui-Xia; Wang, Ting-Ting; Deng, Wei-Qiao Scientific Reports, Vol. 5, Issue 1 https://doi.org/10.1038/srep10155	journal	May 2015
Durable superhydrophobic/superoleophilic PDMS sponges and their applications in selective oil absorption and in plugging oil leakages Zhao, Xia; Li, Lingxiao; Li, Bucheng J. Mater. Chem. A, Vol. 2, Issue 43 https://doi.org/10.1039/C4TA04406A	journal	January 2014
Recent progress in fabrication and application of polydimethylsiloxane sponges Zhu, Deyong; Handschuh-Wang, Stephan; Zhou, Xuechang Journal of Materials Chemistry A, Vol. 5, Issue 32 https://doi.org/10.1039/C7TA04577H	journal	January 2017
Porous organic polymers: a promising platform for efficient photocatalysis Zhang, Ting; Xing, Guolong; Chen, Weiben Materials Chemistry Frontiers, Vol. 4, Issue 2 https://doi.org/10.1039/C9QM00633H	journal	January 2020
Emerging porous organic polymers for biomedical applications Zhu, Youlong; Xu, Peiwen; Zhang, Xingcai Chemical Society Reviews, Vol. 51, Issue 4 https://doi.org/10.1039/D1CS00871D	journal	January 2022
Surface characterization and functionalization of carbon nanofibers Klein, K. L.; Melechko, A. V.; McKnight, T. E. Journal of Applied Physics, Vol. 103, Issue 6 https://doi.org/10.1063/1.2840049	journal	March 2008
Synthesis of macroporous poly(dimethylsiloxane) scaffolds for tissue engineering applications Pedraza, Eileen; Brady, Ann-Christina; Fraker, Christopher A. Journal of Biomaterials Science, Polymer Edition, Vol. 24, Issue 9 https://doi.org/10.1080/09205063.2012.735097	journal	October 2012
Hierarchically porous polymer coatings for highly efficient passive daytime radiative cooling Mandal, Jyotirmoy; Fu, Yanke; Overvig, Adam C. Science, Vol. 362, Issue 6412 https://doi.org/10.1126/science.aat9513	journal	September 2018
Porous polydimethylsiloxane films with specific surface wettability but distinct regular physical structures fabricated by 3D printing He, Zhoukun; Wang, Na; Mu, Linpeng Frontiers in Bioengineering and Biotechnology, Vol. 11 https://doi.org/10.3389/fbioe.2023.1272565	journal	September 2023
Properties and Applications of PDMS for Biomedical Engineering: A Review Miranda, Inês; Souza, Andrews; Sousa, Paulo Journal of Functional Biomaterials, Vol. 13, Issue 1 https://doi.org/10.3390/jfb13010002	journal	December 2021
Balancing Functionality and Printability: High-Loading Polymer Resins for Direct Ink Writing Legett, Shelbie A.; Torres, Xavier; Schmalzer, Andrew M. Polymers, Vol. 14, Issue 21 https://doi.org/10.3390/polym14214661	journal	November 2022
Interplay between Shelf Life and Printability of Silica-Filled Suspensions Torres, Xavier M.; Stockdale, John R.; Adhikari, Santosh Polymers, Vol. 15, Issue 21 https://doi.org/10.3390/polym15214334	journal	November 2023
Porous Polymer Materials in Triboelectric Nanogenerators: A Review Mi, Yajun; Zhao, Zequan; Wu, Han Polymers, Vol. 15, Issue 22 https://doi.org/10.3390/polym15224383	journal	November 2023

Similar Records

Amphiphilic, thixotropic additives for extrusion-based 3D printing of silica-reinforced silicone

Journal Article · 2021 · Soft Matter · OSTI ID:1771361

Suriboot, Jakkrit; Marmo, Alec C.; Ngo, Bryan Khai D.; +4 more

Balancing Functionality and Printability: High-Loading Polymer Resins for Direct Ink Writing

Journal Article · 2022 · Polymers · OSTI ID:1896516

Legett, Shelbie A.; Torres, Xavier; Schmalzer, Andrew M.; +5 more

Flexible 3D printed silicones for gamma and neutron radiation shielding

Journal Article · 2021 · Radiation Physics and Chemistry (1993) · OSTI ID:1788415

Talley, Samantha J.; Robison, Tom; Long, Alexander M.; +6 more

Title: 3D printed porous silicone polymer composites using table salt as a sacrificial template

Citation Formats

References (27)

Similar Records

Related Subjects