Finite element modeling of the glass sealing process for solid oxide cell stacks

Fitzpatrick, James; Meinhardt, Kerry; Karri, Naveen; Koeppel, Brian; Bao, Jie; Jin, Tongan; Seymour, Lorraine; Royer, Nathan; Marina, Olga A.

doi:10.1016/j.cej.2024.155452

Title: Finite element modeling of the glass sealing process for solid oxide cell stacks

Journal Article · 01 October 2024 · Chemical Engineering Journal

DOI: https://doi.org/10.1016/j.cej.2024.155452 · OSTI ID:2447190

Fitzpatrick, James; Meinhardt, Kerry; Karri, Naveen; Koeppel, Brian; Bao, Jie; Jin, Tongan; Seymour, Lorraine; Royer, Nathan;

Not Available

View Journal Article

Cite

Export

Save

Sponsoring Organization:: USDOE

OSTI ID:: 2447190

Journal Information:: Chemical Engineering Journal, Journal Name: Chemical Engineering Journal Journal Issue: C Vol. 498; ISSN 1385-8947

Publisher:: ElsevierCopyright Statement

Country of Publication:: Switzerland

Language:: English

References (33)

Effect of Thermal Cycling on Residual Stress and Curvature of Anode-Supported SOFCs Sun, B.; Rudkin, R. A.; Atkinson, A. Fuel Cells, Vol. 9, Issue 6 https://doi.org/10.1002/fuce.200800133	journal	December 2009
Preparation, properties and chemistry of glass- and glass-ceramic-to-metal seals and coatings Donald, I. W. Journal of Materials Science, Vol. 28, Issue 11 https://doi.org/10.1007/BF00354689	journal	January 1993
Effective elastic moduli of porous solids Ramakrishnan, N.; Arunachalam, V. S. Journal of Materials Science, Vol. 25, Issue 9 https://doi.org/10.1007/BF00582462	journal	September 1990
Three-dimensional numerical simulation for various geometries of solid oxide fuel cells Ferguson, J. R.; Fiard, J. M.; Herbin, R. Journal of Power Sources, Vol. 58, Issue 2 https://doi.org/10.1016/0378-7753(95)02269-4	journal	February 1996
On the flow of crystallizing polymers Tanner, Roger I. Journal of Non-Newtonian Fluid Mechanics, Vol. 112, Issue 2-3 https://doi.org/10.1016/S0377-0257(03)00104-6	journal	June 2003
Theory of sintering: from discrete to continuum Olevsky, Eugene A. Materials Science and Engineering: R: Reports, Vol. 23, Issue 2 https://doi.org/10.1016/S0927-796X(98)00009-6	journal	June 1998
A two-scale model for simultaneous sintering and crystallization of glass–ceramic scaffolds for tissue engineering Huang, R.; Pan, J.; Boccaccini, A. R. Acta Biomaterialia, Vol. 4, Issue 4 https://doi.org/10.1016/j.actbio.2008.02.004	journal	July 2008
Numerical investigation of the thermally and flow induced crystallization behavior of semi-crystalline polymers by using finite element–finite difference method Mu, Yue; Zhao, Guoqun; Chen, Anbiao Computers & Chemical Engineering, Vol. 46 https://doi.org/10.1016/j.compchemeng.2012.06.026	journal	November 2012
Uncertainty quantification for the impact of injection rate fluctuation on the geomechanical response of geological carbon sequestration Bao, Jie; Chu, Yanjun; Xu, Zhijie International Journal of Greenhouse Gas Control, Vol. 20 https://doi.org/10.1016/j.ijggc.2013.10.023	journal	January 2014
Mechanical reliability and durability of SOFC stacks. Part I : Modelling of the effect of operating conditions and design alternatives on the reliability Nakajo, Arata; Mueller, Fabian; Brouwer, Jacob International Journal of Hydrogen Energy, Vol. 37, Issue 11 https://doi.org/10.1016/j.ijhydene.2012.03.043	journal	June 2012
3D transient thermomechanical behaviour of a full scale SOFC short stack Peksen, M.; Al-Masri, A.; Blum, L. International Journal of Hydrogen Energy, Vol. 38, Issue 10 https://doi.org/10.1016/j.ijhydene.2013.01.072	journal	April 2013
Modeling of an anode supported solid oxide fuel cell focusing on thermal stresses Xu, Min; Li, Ting Shuai; Yang, Ming International Journal of Hydrogen Energy, Vol. 41, Issue 33 https://doi.org/10.1016/j.ijhydene.2016.06.171	journal	September 2016
A numerical tool to estimate SOFC mechanical degradation: Case of the planar cell configuration Laurencin, J.; Delette, G.; Lefebvre-Joud, F. Journal of the European Ceramic Society, Vol. 28, Issue 9 https://doi.org/10.1016/j.jeurceramsoc.2007.12.025	journal	January 2008
Sealants for solid oxide fuel cells Fergus, Jeffrey W. Journal of Power Sources, Vol. 147, Issue 1-2, p. 46-57 https://doi.org/10.1016/j.jpowsour.2005.05.002	journal	September 2005
Synthesis and properties of a barium aluminosilicate solid oxide fuel cell glass–ceramic sealant Meinhardt, K. D.; Kim, D.-S.; Chou, Y.-S. Journal of Power Sources, Vol. 182, Issue 1, p. 188-196 https://doi.org/10.1016/j.jpowsour.2008.03.079	journal	July 2008
Simulation of thermal stresses in anode-supported solid oxide fuel cell stacks. Part I: Probability of failure of the cells Nakajo, Arata; Wuillemin, Zacharie; Van herle, Jan Journal of Power Sources, Vol. 193, Issue 1 https://doi.org/10.1016/j.jpowsour.2008.12.050	journal	August 2009
Experimental characterization of glass–ceramic seal properties and their constitutive implementation in solid oxide fuel cell stack models Stephens, E. V.; Vetrano, J. S.; Koeppel, B. J. Journal of Power Sources, Vol. 193, Issue 2 https://doi.org/10.1016/j.jpowsour.2009.02.080	journal	September 2009
Thermal stress analysis of planar solid oxide fuel cell stacks: Effects of sealing design Lin, Chih-Kuang; Huang, Ling-Hao; Chiang, Lieh-Kwang Journal of Power Sources, Vol. 192, Issue 2 https://doi.org/10.1016/j.jpowsour.2009.03.010	journal	July 2009
Thermal stress and probability of failure analyses of functionally graded solid oxide fuel cells Anandakumar, Ganesh; Li, Na; Verma, Atul Journal of Power Sources, Vol. 195, Issue 19 https://doi.org/10.1016/j.jpowsour.2010.04.017	journal	October 2010
Accelerated creep in solid oxide fuel cell anode supports during reduction Frandsen, H. L.; Makowska, M.; Greco, F. Journal of Power Sources, Vol. 323 https://doi.org/10.1016/j.jpowsour.2016.04.097	journal	August 2016
Effects of temperature and hydrogen concentration during reduction on deformation behavior of NiO- yttria stabilized zirconia used in solid oxide fuel cells Tanaka, Junya; Sato, Kazuhisa; Yashiro, Keiji Journal of Power Sources, Vol. 535 https://doi.org/10.1016/j.jpowsour.2022.231384	journal	July 2022
The scenario of greenhouse gases reduction in Malaysia Hosseini, Seyed Ehsan; Wahid, Mazlan Abdul; Aghili, Nasim Renewable and Sustainable Energy Reviews, Vol. 28 https://doi.org/10.1016/j.rser.2013.08.045	journal	December 2013
Thermal expansion and elastic moduli of electrolyte materials for high and intermediate temperature solid oxide fuel cell Gao, Peipei; Bolon, Amy; Taneja, Manisha Solid State Ionics, Vol. 300 https://doi.org/10.1016/j.ssi.2016.11.015	journal	February 2017
Energy and global warming: The great convergence Schnoor, Jerald L. Environmental Science & Technology, Vol. 38, Issue 7 https://doi.org/10.1021/es040443t	journal	April 2004
A review of high temperature co-electrolysis of H ₂ O and CO ₂ to produce sustainable fuels using solid oxide electrolysis cells (SOECs): advanced materials and technology Zheng, Yun; Wang, Jianchen; Yu, Bo Chemical Society Reviews, Vol. 46, Issue 5 https://doi.org/10.1039/C6CS00403B	journal	January 2017
Kinetics of Phase Change. I General Theory Avrami, Melvin The Journal of Chemical Physics, Vol. 7, Issue 12, p. 1103-1112 https://doi.org/10.1063/1.1750380	journal	December 1939
Kinetics of Phase Change. II Transformation‐Time Relations for Random Distribution of Nuclei Avrami, Melvin The Journal of Chemical Physics, Vol. 8, Issue 2 https://doi.org/10.1063/1.1750631	journal	February 1940
Effect of stress on NiO reduction in solid oxide fuel cells: a new application of energy-resolved neutron imaging Makowska, Małgorzata G.; Strobl, Markus; Lauridsen, Erik M. Journal of Applied Crystallography, Vol. 48, Issue 2 https://doi.org/10.1107/S1600576715002794	journal	March 2015
Influences of Temperature and Oxygen Partial Pressure on Mechanical Properties of La0.6Sr0.4Co1−yFeyO3−δ Kimura, Yuta; Kushi, Takuto; Hashimoto, Shin-ichi Journal of the American Ceramic Society, Vol. 95, Issue 8 https://doi.org/10.1111/j.1551-2916.2012.05265.x	journal	May 2012
On the nonlinear temperature dependence of residual stresses in solid oxide fuel cells Lara‐Curzio, Edgar; Cakmak, Ercan; Lin, Lianshan Journal of the American Ceramic Society, Vol. 104, Issue 2 https://doi.org/10.1111/jace.17488	journal	October 2020
Analysis of Composite Materials—A Survey Hashin, Z. Journal of Applied Mechanics, Vol. 50, Issue 3 https://doi.org/10.1115/1.3167081	journal	September 1983
Analysis of Fuel Utilization Performance of Round Substrate, Planar Solid Oxide Fuel Cells Iwata, Tomoo; Enami, Yoshiaki Journal of The Electrochemical Society, Vol. 145, Issue 3 https://doi.org/10.1149/1.1838369	journal	March 1998
Thermal Expansion of Nickel-Zirconia Anodes in Solid Oxide Fuel Cells during Fabrication and Operation Mori, Masashi Journal of The Electrochemical Society, Vol. 145, Issue 4 https://doi.org/10.1149/1.1838468	journal	January 1998

Similar Records

Experimental characterization of glass-ceramic seal properties and their constitutive implementation in solid oxide fuel cell stack models

Journal Article · 2009 · Journal of Power Sources, 193(2):625-631 · OSTI ID:965573

Stephens, Elizabeth V; Vetrano, John S; Koeppel, Brian J; +3 more

An alkali-free barium borosilicate viscous sealing glass for solid oxide fuel cells

Journal Article · 2014 · Journal of Power Sources · OSTI ID:1556580

Hsu, Jen-Hsien; Kim, Cheol-Woon; Brow, Richard K.; +3 more

A Direct Manufacturing Cost Model for Solid‐Oxide Fuel Cell Stacks

Journal Article · 2017 · Fuel Cells · OSTI ID:1409862

Scataglini, R.; Wei, M.; Mayyas, A.; +3 more

Title: Finite element modeling of the glass sealing process for solid oxide cell stacks

Citation Formats

References (33)

Similar Records

Related Subjects