DOE PAGES title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Investigation of pedestal parameters and divertor heat fluxes in small ELM regimes in DIII-D

Journal Article · · Nuclear Fusion

Abstract Divertor heat flux and its correlation with pedestal parameters within various small edge localized mode (ELM) regimes, including high beta poloidal, type-II and ELMs with negative triangularity H-modes were investigated in DIII-D. The parallel energy fluences of type-II and high beta poloidal small ELM regimes fall below the linear scaling with pedestal electron pressure for type-I ELMs put forward in Eich et al 2017 ( Nucl. Mater. Energy 12 84–90). The negative triangularity of H-mode ELMs follow the Eich scaling for type-I ELMs. The parallel heat flux and total heat loads to the divertor were determined using high-time resolution infrared thermography, while pedestal parameters were obtained through self-consistent kinetic equilibrium reconstructions. Linear regressions for the type-II and high beta poloidal regimes demonstrate that an equivalent 7.5 MA small ELM scenario in ITER would fall below the ~5  MJ m 2 leading edge melting limit for tungsten (Gunn et al 2017 Nucl. Fusion 57 046025). Utilizing fast thermography, the scrape-off layer power fall-off length for both inter-ELM and intra-ELM was determined and compared to the Eich scaling with poloidal magnetic field in Eich et al (ASDEX Upgrade Team and JET EFDA Contributors 2013 Nucl. Fusion 53 093031). Except for the high beta poloidal scenario, all the small ELM regimes during both inter- and intra-ELM periods had power fall-off lengths ( λ q ) larger then would be expected from the B pol , MP 1 scaling associated with type-I ELMs, signifying their potential in managing heat loads and offering a solution for core–edge integration.

Sponsoring Organization:
USDOE Office of Science (SC), Fusion Energy Sciences (FES)
Grant/Contract Number:
AC52-07NA27344
OSTI ID:
2447185
Journal Information:
Nuclear Fusion, Journal Name: Nuclear Fusion Journal Issue: 10 Vol. 64; ISSN 0029-5515
Publisher:
IOP PublishingCopyright Statement
Country of Publication:
IAEA
Language:
English

References (36)

Tolerable ELMs at high density in DIII-D journal March 2001
ELM divertor peak energy fluence scaling to ITER with data from JET, MAST and ASDEX upgrade journal August 2017
Prospects of core–edge integrated no-ELM and small-ELM scenarios for future fusion devices journal March 2023
Edge stability and transport control with resonant magnetic perturbations in collisionless tokamak plasmas journal May 2006
Edge localized modes and the pedestal: A model based on coupled peeling–ballooning modes journal May 2002
Numerical studies of edge localized instabilities in tokamaks journal April 2002
H-mode pedestal scaling in DIII-D, ASDEX Upgrade, and JET journal May 2011
Analysis of a multi-machine database on divertor heat fluxes journal May 2012
Edge-localized-modes in tokamaks journal September 2014
Experimental evidence of enhanced radial transport in small ELM regimes at DIII-D journal February 2024
Reconstruction of current profile parameters and plasma shapes in tokamaks journal November 1985
Plasma shaping, edge ballooning stability and ELM behaviour in DIII-D journal August 1990
Pedestal stability comparison and ITER pedestal prediction journal July 2009
ITER predictions using the GYRO verified and experimentally validated trapped gyro-Landau fluid transport model journal June 2011
Characterization of the pedestal in Alcator C-Mod ELMing H-modes and comparison with the EPED model journal April 2012
Scaling of the tokamak near the scrape-off layer H-mode power width and implications for ITER journal August 2013
ELM energy scaling in DIII-D journal May 2002
Characterization of peeling–ballooning stability limits on the pedestal journal April 2004
Edge localized modes: recent experimental findings and related issues journal June 2007
Joint DIII-D/EAST research on the development of a high poloidal beta scenario for the steady state missions of ITER and CFETR journal November 2017
Surface heat loads on the ITER divertor vertical targets journal March 2017
Gyrokinetic projection of the divertor heat-flux width from present tokamaks to ITER journal August 2017
Access and sustainment of naturally ELM-free and small-ELM regimes journal September 2018
Investigation of the role of pedestal pressure and collisionality on type-I ELM divertor heat loads in DIII-D journal July 2018
Grassy-ELM regime with edge resonant magnetic perturbations in fully noninductive plasmas in the DIII-D tokamak journal July 2018
High fusion performance in Super H-mode experiments on Alcator C-Mod and DIII-D journal June 2019
Grassy ELM regime at low pedestal collisionality in high-power tokamak plasma journal December 2020
Diverted negative triangularity plasmas on DIII-D: the benefit of high confinement without the liability of an edge pedestal journal September 2021
SOL width broadening by spreading of pedestal turbulence journal April 2022
Prospects for H-mode inhibition in negative triangularity tokamak reactor plasmas journal August 2022
Measurements and modeling of type-I and type-II ELMs heat flux to the DIII-D divertor journal July 2023
Inter-ELM Power Decay Length for JET and ASDEX Upgrade: Measurement and Comparison with Heuristic Drift-Based Model journal November 2011
Achievement of Reactor-Relevant Performance in Negative Triangularity Shape in the DIII-D Tokamak journal March 2019
Quasicontinuous Exhaust Scenario for a Fusion Reactor: The Renaissance of Small Edge Localized Modes journal October 2022
Robust Avoidance of Edge-Localized Modes alongside Gradient Formation in the Negative Triangularity Tokamak Edge journal November 2023
Regime of Improved Confinement and High Beta in Neutral-Beam-Heated Divertor Discharges of the ASDEX Tokamak journal November 1982