Numerical modeling of fiber orientation in multi-layer, isothermal material-extrusion big area additive manufacturing

Šeta, Berin; Sandberg, Michael; Brander, Marco; Mollah, Md. Tusher; Pokkalla, Deepak Kumar; Kumar, Vipin; Spangenberg, Jon

doi:10.1016/j.addma.2024.104396

Title: Numerical modeling of fiber orientation in multi-layer, isothermal material-extrusion big area additive manufacturing

Journal Article · 30 June 2024 · Additive Manufacturing

DOI: https://doi.org/10.1016/j.addma.2024.104396 · OSTI ID:2440071

;

; Pokkalla, Deepak Kumar; Kumar, Vipin; Spangenberg, Jon

Not Available

View Journal Article

Cite

Export

Save

Research Organization:: Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)

Sponsoring Organization:: Innovation Fund Denmark; USDOE; USDOE Office of Energy Efficiency and Renewable Energy (EERE)

Grant/Contract Number:: AC05-00OR22725

OSTI ID:: 2440071

Journal Information:: Additive Manufacturing, Journal Name: Additive Manufacturing Journal Issue: C Vol. 92; ISSN 2214-8604

Publisher:: ElsevierCopyright Statement

Country of Publication:: Netherlands

Language:: English

References (42)

Numerical Simulation of Injection Molding using OpenFOAM Ospald, Felix PAMM, Vol. 14, Issue 1 https://doi.org/10.1002/pamm.201410320	journal	December 2014
Stereological measurement and error estimates for three-dimensional fiber orientation Bay, Randy S.; Tucker, Charles L. Polymer Engineering and Science, Vol. 32, Issue 4 https://doi.org/10.1002/pen.760320404	journal	February 1992
Folgar–Tucker constant for a fibre suspension in a Newtonian fluid Phan-Thien, N.; Fan, X. -J.; Tanner, R. I. Journal of Non-Newtonian Fluid Mechanics, Vol. 103, Issue 2-3 https://doi.org/10.1016/S0377-0257(02)00006-X	journal	March 2002
Numerical simulations of concrete processing: From standard formative casting to additive manufacturing Roussel, Nicolas; Spangenberg, Jon; Wallevik, Jon Cement and Concrete Research, Vol. 135 https://doi.org/10.1016/j.cemconres.2020.106075	journal	September 2020
Modelling of 3D concrete printing based on computational fluid dynamics Comminal, Raphael; Leal da Silva, Wilson Ricardo; Andersen, Thomas Juul Cement and Concrete Research, Vol. 138 https://doi.org/10.1016/j.cemconres.2020.106256	journal	December 2020
Fiber orientation effects on ultra-high performance concrete formed by 3D printing Arunothayan, Arun R.; Nematollahi, Behzad; Ranade, Ravi Cement and Concrete Research, Vol. 143, p. 106384 https://doi.org/10.1016/j.cemconres.2021.106384	journal	April 2021
Rheological characterization of 3D printable geopolymers Ranjbar, Navid; Mehrali, Mehdi; Kuenzel, Carsten Cement and Concrete Research, Vol. 147 https://doi.org/10.1016/j.cemconres.2021.106498	journal	September 2021
Particle migration using local variation of the viscosity (LVOV) model in flow of a non-Newtonian fluid for ceramic tape casting Jabbari, Masoud; Spangenberg, Jon; Hattel, Jesper H. Chemical Engineering Research and Design, Vol. 109 https://doi.org/10.1016/j.cherd.2016.01.036	journal	May 2016
A numerical study of the effect of viscoelastic stresses in fused filament fabrication Xia, Huanxiong; Lu, Jiacai; Tryggvason, Gretar Computer Methods in Applied Mechanics and Engineering, Vol. 346 https://doi.org/10.1016/j.cma.2018.11.031	journal	April 2019
A new anisotropic viscous constitutive model for composites molding simulation Favaloro, Anthony J.; Tseng, Huan-Chang; Pipes, R. Byron Composites Part A: Applied Science and Manufacturing, Vol. 115 https://doi.org/10.1016/j.compositesa.2018.09.022	journal	December 2018
Analysis of anisotropic rotary diffusion models for fiber orientation Favaloro, Anthony J.; Tucker, Charles L. Composites Part A: Applied Science and Manufacturing, Vol. 126 https://doi.org/10.1016/j.compositesa.2019.105605	journal	November 2019
Numerical analysis of screw swirling effects on fiber orientation in large area additive manufacturing polymer composite deposition Wang, Zhaogui; Smith, Douglas E. Composites Part B: Engineering, Vol. 177 https://doi.org/10.1016/j.compositesb.2019.107284	journal	November 2019
Finite element modelling of fully-coupled flow/fiber-orientation effects in polymer composite deposition additive manufacturing nozzle-extrudate flow Wang, Zhaogui; Smith, Douglas E. Composites Part B: Engineering, Vol. 219 https://doi.org/10.1016/j.compositesb.2021.108811	journal	August 2021
Comprehensive investigation of reclaimed carbon fibre reinforced polyamide (rCF/PA) filaments and FDM printed composites Su, Ning; Pierce, Robert S.; Rudd, Chris Composites Part B: Engineering, Vol. 233 https://doi.org/10.1016/j.compositesb.2022.109646	journal	March 2022
Cost-efficient, automated, and sustainable composite profile manufacture: A review of the state of the art, innovations, and future of pultrusion technologies Volk, Maximilian; Yuksel, Onur; Baran, Ismet Composites Part B: Engineering, Vol. 246 https://doi.org/10.1016/j.compositesb.2022.110135	journal	November 2022
Influence of printing conditions on the extrudate shape and fiber orientation in extrusion deposition additive manufacturing Pibulchinda, Pasita; Barocio, Eduardo; Favaloro, Anthony J. Composites Part B: Engineering, Vol. 261 https://doi.org/10.1016/j.compositesb.2023.110793	journal	July 2023
Modeling fiber orientation and strand shape morphology in three-dimensional material extrusion additive manufacturing Šeta, Berin; Sandberg, Michael; Brander, Marco Composites Part B: Engineering, Vol. 266, 110957 https://doi.org/10.1016/j.compositesb.2023.110957	journal	November 2023
Highly oriented carbon fiber–polymer composites via additive manufacturing Tekinalp, Halil L.; Kunc, Vlastimil; Velez-Garcia, Gregorio M. Composites Science and Technology, Vol. 105 https://doi.org/10.1016/j.compscitech.2014.10.009	journal	December 2014
Interlayer fusion bonding of semi-crystalline polymer composites in extrusion deposition additive manufacturing Barocio, Eduardo; Brenken, Bastian; Favaloro, Anthony Composites Science and Technology, Vol. 230 https://doi.org/10.1016/j.compscitech.2022.109334	journal	November 2022
Simulations of fused filament fabrication using a front tracking method Xia, Huanxiong; Lu, Jiacai; Tryggvason, Gretar International Journal of Heat and Mass Transfer, Vol. 138 https://doi.org/10.1016/j.ijheatmasstransfer.2019.04.132	journal	August 2019
Integrated modeling of heat transfer, shear rate, and viscosity for simulation-based characterization of polymer coalescence during material extrusion Bakrani Balani, Shahriar; Mokhtarian, Hossein; Coatanéa, Eric Journal of Manufacturing Processes, Vol. 90 https://doi.org/10.1016/j.jmapro.2023.02.021	journal	March 2023
Rheological properties of short fiber filled polypropylene in transient shear flow Sepehr, M.; Ausias, G.; Carreau, P. J. Journal of Non-Newtonian Fluid Mechanics, Vol. 123, Issue 1 https://doi.org/10.1016/j.jnnfm.2004.06.005	journal	October 2004
An anisotropic rotary diffusion model for fiber orientation in short- and long-fiber thermoplastics Phelps, Jay H.; Tucker, Charles L. Journal of Non-Newtonian Fluid Mechanics, Vol. 156, Issue 3 https://doi.org/10.1016/j.jnnfm.2008.08.002	journal	February 2009
A rheological constitutive model for semiconcentrated rod suspensions in Bingham fluids Férec, J.; Bertevas, E.; Khoo, B. C. Physics of Fluids, Vol. 29, Issue 7 https://doi.org/10.1063/1.4995436	journal	July 2017
Smoothed particle hydrodynamics (SPH) modeling of fiber orientation in a 3D printing process Bertevas, Erwan; Férec, Julien; Khoo, Boo Cheong Physics of Fluids, Vol. 30, Issue 10 https://doi.org/10.1063/1.5047088	journal	October 2018
A smoothed particle hydrodynamics simulation of fiber-filled composites in a non-isothermal three-dimensional printing process Bertevas, Erwan; Parc, Laetitia; Phan-Thien, Nhan Physics of Fluids, Vol. 31, Issue 12 https://doi.org/10.1063/1.5130711	journal	December 2019
A smoothed particle hydrodynamics study of a non-isothermal and thermally anisotropic fused deposition modeling process for a fiber-filled composite Ouyang, Zhenyu; Bertevas, Erwan; Wang, Di Physics of Fluids, Vol. 32, Issue 5 https://doi.org/10.1063/5.0004527	journal	May 2020
Performance of interFoam on the simulation of progressive waves Larsen, Bjarke Eltard; Fuhrman, David R.; Roenby, Johan Coastal Engineering Journal, Vol. 61, Issue 3 https://doi.org/10.1080/21664250.2019.1609713	journal	May 2019
Current and emerging applications of 3D printing in medicine Liaw, Chya-Yan; Guvendiren, Murat Biofabrication, Vol. 9, Issue 2 https://doi.org/10.1088/1758-5090/aa7279	journal	June 2017
The use of rapid prototyping to assist medical applications Gibson, I.; Cheung, L. K.; Chow, S. P. Rapid Prototyping Journal, Vol. 12, Issue 1 https://doi.org/10.1108/13552540610637273	journal	January 2006
An objective model for slow orientation kinetics in concentrated fiber suspensions: Theory and rheological evidence Wang, Jin; O’Gara, John F.; Tucker, Charles L. Journal of Rheology, Vol. 52, Issue 5 https://doi.org/10.1122/1.2946437	journal	September 2008
A Rheological Equation of State for Semiconcentrated Fiber Suspensions Dinh, Steven M.; Armstrong, Robert C. Journal of Rheology, Vol. 28, Issue 3 https://doi.org/10.1122/1.549748	journal	June 1984
The Use of Tensors to Describe and Predict Fiber Orientation in Short Fiber Composites Advani, Suresh G.; Tucker, Charles L. Journal of Rheology, Vol. 31, Issue 8 https://doi.org/10.1122/1.549945	journal	November 1987
Closure approximations for three‐dimensional structure tensors Advani, Suresh G.; Tucker, Charles L. Journal of Rheology, Vol. 34, Issue 3 https://doi.org/10.1122/1.550133	journal	April 1990
Orientation Behavior of Fibers in Concentrated Suspensions Folgar, Fransisco; Tucker, Charles L. Journal of Reinforced Plastics and Composites, Vol. 3, Issue 2 https://doi.org/10.1177/073168448400300201	journal	April 1984
The present and future of additive manufacturing in the aerospace sector: A review of important aspects Uriondo, Adrián; Esperon-Miguez, Manuel; Perinpanayagam, Suresh Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, Vol. 229, Issue 11 https://doi.org/10.1177/0954410014568797	journal	January 2015
Numerical simulation of multi-layer 3D concrete printing Spangenberg, Jon; Leal da Silva, Wilson Ricardo; Comminal, Raphaël RILEM Technical Letters, Vol. 6 https://doi.org/10.21809/rilemtechlett.2021.142	journal	October 2021
Verification and Validation of openInjMoldSim, an Open-Source Solver to Model the Filling Stage of Thermoplastic Injection Molding Pedro, João; Ramôa, Bruno; Nóbrega, João Miguel Fluids, Vol. 5, Issue 2 https://doi.org/10.3390/fluids5020084	journal	May 2020
Rheology Effects on Predicted Fiber Orientation and Elastic Properties in Large Scale Polymer Composite Additive Manufacturing Wang, Zhaogui; Smith, Douglas Journal of Composites Science, Vol. 2, Issue 1 https://doi.org/10.3390/jcs2010010	journal	February 2018
Prediction of the Fiber Orientation State and the Resulting Structural and Thermal Properties of Fiber Reinforced Additive Manufactured Composites Fabricated Using the Big Area Additive Manufacturing Process Russell, Timothy; Heller, Blake; Jack, David Journal of Composites Science, Vol. 2, Issue 2 https://doi.org/10.3390/jcs2020026	journal	April 2018
Measuring Fiber Orientation of Elliptical Fibers from Optical Microscopy Sharp, Nathan; Goodsell, Johnathan; Favaloro, Anthony Journal of Composites Science, Vol. 3, Issue 1 https://doi.org/10.3390/jcs3010023	journal	March 2019
A Fully Coupled Simulation of Planar Deposition Flow and Fiber Orientation in Polymer Composites Additive Manufacturing Wang, Zhaogui; Smith, Douglas E. Materials, Vol. 14, Issue 10 https://doi.org/10.3390/ma14102596	journal	May 2021

Similar Records

Modeling fiber orientation and strand shape morphology in three-dimensional material extrusion additive manufacturing

Journal Article · 2023 · Composites. Part B, Engineering · OSTI ID:1997565

Šeta, Berin; Sandberg, Michael; Brander, Marco; +4 more

Wire Co-Extrusion with Big Area Additive Manufacturing

Conference · 2019 · OSTI ID:1606634

Atkins, Celeste; Heineman, Jesse; Chesser, Phillip; +5 more

Designing for Big Area Additive Manufacturing

Journal Article · 2018 · Additive Manufacturing · OSTI ID:1488707

Roschli, Alex; Gaul, Katherine T.; Boulger, Alex M.; +5 more

Related Subjects

36 MATERIALS SCIENCE
Computational fluid dynamics
Fiber orientation
Fiber-reinforced composites
Material extrusion additive manufacturing
Multi-layer deposition

Title: Numerical modeling of fiber orientation in multi-layer, isothermal material-extrusion big area additive manufacturing

Citation Formats

References (42)

Similar Records

Related Subjects