Bayesian calibration and uncertainty quantification of a rate-dependent cohesive zone model for polymer interfaces

Thiagarajan, Ponkrshnan; Sain, Trisha; Ghosh, Susanta

doi:10.1016/j.engfracmech.2024.110374

Title: Bayesian calibration and uncertainty quantification of a rate-dependent cohesive zone model for polymer interfaces

Journal Article · 01 October 2024 · Engineering Fracture Mechanics

DOI: https://doi.org/10.1016/j.engfracmech.2024.110374 · OSTI ID:2439318

; Sain, Trisha;

Not Available

View Accepted Manuscript (Publisher)

Cite

Export

Save

Sponsoring Organization:: USDOE

Grant/Contract Number:: AC02-05CH11231; SC0023432

OSTI ID:: 2439318

Journal Information:: Engineering Fracture Mechanics, Journal Name: Engineering Fracture Mechanics Journal Issue: C Vol. 309; ISSN 0013-7944

Publisher:: ElsevierCopyright Statement

Country of Publication:: United Kingdom

Language:: English

References (71)

Finite-deformation irreversible cohesive elements for three-dimensional crack-propagation analysis Ortiz, M.; Pandolfi, A. International Journal for Numerical Methods in Engineering, Vol. 44, Issue 9 https://doi.org/10.1002/(SICI)1097-0207(19990330)44:9<1267::AID-NME486>3.0.CO;2-7	journal	March 1999
Mixed mode failure analysis of bonded joints with rate‐dependent interface models Giambanco, G.; Fileccia Scimemi, G. International Journal for Numerical Methods in Engineering, Vol. 67, Issue 8 https://doi.org/10.1002/nme.1671	journal	March 2006
Measurement of cohesive zone parameters in tough polyethylene Pandya, K. C.; Williams, J. G. Polymer Engineering & Science, Vol. 40, Issue 8 https://doi.org/10.1002/pen.11308	journal	August 2000
The role of recovery forces in the deformation of linear polyethylene Fotheringham, D. G.; Cherry, B. W. Journal of Materials Science, Vol. 13, Issue 5 https://doi.org/10.1007/BF00544690	journal	May 1978
Comment on ?the compression yield behaviour of polymethyl methacrylate over a wide range of temperatures and strain-rates? Fotheringham, David; Cherry, B. W.; Bauwens-Crowet, C. Journal of Materials Science, Vol. 11, Issue 7 https://doi.org/10.1007/BF00545162	journal	January 1976
Computational modelling of impact damage in brittle materials Camacho, G. T.; Ortiz, M. International Journal of Solids and Structures, Vol. 33, Issue 20-22 https://doi.org/10.1016/0020-7683(95)00255-3	journal	August 1996
The relation between crack growth resistance and fracture process parameters in elastic-plastic solids Tvergaard, Viggo; Hutchinson, John W. Journal of the Mechanics and Physics of Solids, Vol. 40, Issue 6 https://doi.org/10.1016/0022-5096(92)90020-3	journal	August 1992
Numerical simulations of fast crack growth in brittle solids Xu, X. -P.; Needleman, A. Journal of the Mechanics and Physics of Solids, Vol. 42, Issue 9 https://doi.org/10.1016/0022-5096(94)90003-5	journal	September 1994
Rate sensitivity of mode II interlaminar fracture toughness in graphite/epoxy and graphite/PEEK composite materials Smiley, A. J.; Pipes, R. B. Composites Science and Technology, Vol. 29, Issue 1 https://doi.org/10.1016/0266-3538(87)90033-9	journal	January 1987
The cohesive zone model: advantages, limitations and challenges Elices, M.; Guinea, G. V.; Gómez, J. Engineering Fracture Mechanics, Vol. 69, Issue 2 https://doi.org/10.1016/S0013-7944(01)00083-2	journal	January 2002
Rate-dependent interface models: formulation and numerical applications Corigliano, Alberto; Ricci, Michele International Journal of Solids and Structures, Vol. 38, Issue 4 https://doi.org/10.1016/S0020-7683(00)00088-3	journal	January 2001
Mixed-mode, time-dependent rubber/metal debonding M. Liechti, Kenneth; Wu, Jeng-Dah Journal of the Mechanics and Physics of Solids, Vol. 49, Issue 5 https://doi.org/10.1016/S0022-5096(00)00065-X	journal	May 2001
Numerical simulations of adhesively-bonded beams failing with extensive plastic deformation Yang, Q. Journal of the Mechanics and Physics of Solids, Vol. 47, Issue 6 https://doi.org/10.1016/S0022-5096(98)00101-X	journal	April 1999
Rate-dependent crack growth in adhesives Xu, Chongchen; Siegmund, Thomas; Ramani, Karthik International Journal of Adhesion and Adhesives, Vol. 23, Issue 1 https://doi.org/10.1016/S0143-7496(02)00062-3	journal	January 2003
Rate-dependent crack growth in adhesives II. Experiments and analysis Xu, Chongchen; Siegmund, Thomas; Ramani, Karthik International Journal of Adhesion and Adhesives, Vol. 23, Issue 1 https://doi.org/10.1016/S0143-7496(02)00063-5	journal	January 2003
Crack velocity dependent toughness in rate dependent materials Landis, Chad M.; Pardoen, Thomas; Hutchinson, John W. Mechanics of Materials, Vol. 32, Issue 11 https://doi.org/10.1016/S0167-6636(00)00031-4	journal	November 2000
Numerical modeling of rate-dependent debonding processes in composites Corigliano, Alberto; Mariani, Stefano; Pandolfi, Anna Composite Structures, Vol. 61, Issue 1-2 https://doi.org/10.1016/S0263-8223(03)00030-8	journal	July 2003
Rate dependence of mode I fracture behaviour in carbon-fibre/epoxy composite laminates Kusaka, Takayuki; Hojo, Masaki; Mai, Yiu-Wing Composites Science and Technology, Vol. 58, Issue 3-4 https://doi.org/10.1016/S0266-3538(97)00176-0	journal	March 1998
Effects of rate on crack growth in a rubber-modified epoxy Du, J.; Thouless, M. D.; Yee, A. F. Acta Materialia, Vol. 48, Issue 13 https://doi.org/10.1016/S1359-6454(00)00110-5	journal	August 2000
Polymer interfacial fracture simulations using cohesive elements Rahul-Kumar, P.; Jagota, A.; Bennison, S. J. Acta Materialia, Vol. 47, Issue 15-16 https://doi.org/10.1016/S1359-6454(99)00276-1	journal	November 1999
The effect of film thickness on the failure strain of polymer-supported metal films Lu, Nanshu; Suo, Zhigang; Vlassak, Joost J. Acta Materialia, Vol. 58, Issue 5 https://doi.org/10.1016/j.actamat.2009.11.010	journal	March 2010
Fuzzy uncertainty propagation in composites using Gram–Schmidt polynomial chaos expansion Dey, S.; Mukhopadhyay, T.; Khodaparast, H. Haddad Applied Mathematical Modelling, Vol. 40, Issue 7-8 https://doi.org/10.1016/j.apm.2015.11.038	journal	April 2016
A Bayesian calibration approach to the thermal problem Higdon, Dave; Nakhleh, Charles; Gattiker, James Computer Methods in Applied Mechanics and Engineering, Vol. 197, Issue 29-32 https://doi.org/10.1016/j.cma.2007.05.031	journal	May 2008
A Bayesian analysis of the thermal challenge problem Liu, F.; Bayarri, M. J.; Berger, J. O. Computer Methods in Applied Mechanics and Engineering, Vol. 197, Issue 29-32 https://doi.org/10.1016/j.cma.2007.05.032	journal	May 2008
A simple and robust three-dimensional cracking-particle method without enrichment Rabczuk, Timon; Zi, Goangseup; Bordas, Stephane Computer Methods in Applied Mechanics and Engineering, Vol. 199, Issue 37-40 https://doi.org/10.1016/j.cma.2010.03.031	journal	August 2010
A computational framework for Bayesian inference in plasticity models characterisation Asaadi, Erfan; Heyns, P. Stephan Computer Methods in Applied Mechanics and Engineering, Vol. 321 https://doi.org/10.1016/j.cma.2017.04.017	journal	July 2017
Numerical analysis of rate-dependent dynamic composite delamination Corigliano, Alberto; Mariani, Stefano; Pandolfi, Anna Composites Science and Technology, Vol. 66, Issue 6 https://doi.org/10.1016/j.compscitech.2004.12.031	journal	May 2006
Cohesive zone modeling for viscoplastic behavior at finite deformations Lu, Zixing; Xu, Qiang Composites Science and Technology, Vol. 74 https://doi.org/10.1016/j.compscitech.2012.11.009	journal	January 2013
A novel rate-dependent cohesive-zone model combining damage and visco-elasticity Musto, Marco; Alfano, Giulio Computers & Structures, Vol. 118 https://doi.org/10.1016/j.compstruc.2012.12.020	journal	March 2013
Simulation of dynamic ductile crack growth using strain-rate and triaxiality-dependent cohesive elements Anvari, M.; Scheider, I.; Thaulow, C. Engineering Fracture Mechanics, Vol. 73, Issue 15 https://doi.org/10.1016/j.engfracmech.2006.03.016	journal	October 2006
The cohesive frictional crack model applied to the analysis of the dam-foundation joint Barpi, F.; Valente, S. Engineering Fracture Mechanics, Vol. 77, Issue 11 https://doi.org/10.1016/j.engfracmech.2010.02.030	journal	July 2010
A loading rate dependent cohesive model for concrete fracture Rosa, A. L.; Yu, R. C.; Ruiz, G. Engineering Fracture Mechanics, Vol. 82 https://doi.org/10.1016/j.engfracmech.2011.12.013	journal	March 2012
Rate dependent behavior of crash-optimized adhesives – Experimental characterization, model development, and simulation May, Michael; Hesebeck, Olaf; Marzi, Stephan Engineering Fracture Mechanics, Vol. 133 https://doi.org/10.1016/j.engfracmech.2014.11.006	journal	January 2015
Rate effects for mixed-mode fracture of plastically-deforming, adhesively-bonded structures Sun, C.; Thouless, M. D.; Waas, A. M. International Journal of Adhesion and Adhesives, Vol. 29, Issue 4 https://doi.org/10.1016/j.ijadhadh.2008.09.003	journal	June 2009
An elastic–plastic interface constitutive model: application to adhesive joints Su, C.; Wei, Y. J.; Anand, L. International Journal of Plasticity, Vol. 20, Issue 12 https://doi.org/10.1016/j.ijplas.2003.12.008	journal	December 2004
A thermo-mechanically coupled theory for large deformations of amorphous polymers. Part I: Formulation Anand, Lallit; Ames, Nicoli M.; Srivastava, Vikas International Journal of Plasticity, Vol. 25, Issue 8 https://doi.org/10.1016/j.ijplas.2008.11.004	journal	August 2009
A thermo-mechanically coupled theory for large deformations of amorphous polymers. Part II: Applications Ames, Nicoli M.; Srivastava, Vikas; Chester, Shawn A. International Journal of Plasticity, Vol. 25, Issue 8 https://doi.org/10.1016/j.ijplas.2008.11.005	journal	August 2009
A thermo-mechanically-coupled large-deformation theory for amorphous polymers in a temperature range which spans their glass transition Srivastava, Vikas; Chester, Shawn A.; Ames, Nicoli M. International Journal of Plasticity, Vol. 26, Issue 8 https://doi.org/10.1016/j.ijplas.2010.01.004	journal	August 2010
An elastic–plastic cohesive zone model for metal–ceramic interfaces at finite deformations Xu, Qiang; Lu, Zixing International Journal of Plasticity, Vol. 41 https://doi.org/10.1016/j.ijplas.2012.09.008	journal	February 2013
Mechanics of the rate-dependent elastic–plastic deformation of glassy polymers from low to high strain rates Mulliken, A. D.; Boyce, M. C. International Journal of Solids and Structures, Vol. 43, Issue 5 https://doi.org/10.1016/j.ijsolstr.2005.04.016	journal	March 2006
Influence of temperature and strain rate on the mechanical behavior of three amorphous polymers: Characterization and modeling of the compressive yield stress Richeton, J.; Ahzi, S.; Vecchio, K. S. International Journal of Solids and Structures, Vol. 43, Issue 7-8 https://doi.org/10.1016/j.ijsolstr.2005.06.040	journal	April 2006
Bayesian estimates of parameter variability in the k–ε turbulence model Edeling, W. N.; Cinnella, P.; Dwight, R. P. Journal of Computational Physics, Vol. 258 https://doi.org/10.1016/j.jcp.2013.10.027	journal	February 2014
Selection of model discrepancy priors in Bayesian calibration Ling, You; Mullins, Joshua; Mahadevan, Sankaran Journal of Computational Physics, Vol. 276 https://doi.org/10.1016/j.jcp.2014.08.005	journal	November 2014
Numerical simulations of crack deflection at a twist-misoriented grain boundary between two ideally brittle crystals Wei, Yujie; Gao, Huajian; Bower, Allan F. Journal of the Mechanics and Physics of Solids, Vol. 57, Issue 11 https://doi.org/10.1016/j.jmps.2009.07.007	journal	November 2009
Modeling the effect of rate and geometry on peeling and tack of pressure-sensitive adhesives Mohammed, I. K.; Charalambides, M. N.; Kinloch, A. J. Journal of Non-Newtonian Fluid Mechanics, Vol. 233 https://doi.org/10.1016/j.jnnfm.2016.01.016	journal	July 2016
Reified Bayesian modelling and inference for physical systems Goldstein, Michael; Rougier, Jonathan Journal of Statistical Planning and Inference, Vol. 139, Issue 3 https://doi.org/10.1016/j.jspi.2008.07.019	journal	March 2009
Non-local separation constitutive laws for interfaces and their relation to nanoscale simulations Spearot, Douglas E.; Jacob, Karl I.; McDowell, David L. Mechanics of Materials, Vol. 36, Issue 9 https://doi.org/10.1016/j.mechmat.2003.08.002	journal	September 2004
Bayesian uncertainty analysis of finite deformation viscoelasticity Miles, Paul; Hays, Michael; Smith, Ralph Mechanics of Materials, Vol. 91 https://doi.org/10.1016/j.mechmat.2015.07.002	journal	December 2015
A formulation of the cooperative model for the yield stress of amorphous polymers for a wide range of strain rates and temperatures Richeton, J.; Ahzi, S.; Daridon, L. Polymer, Vol. 46, Issue 16 https://doi.org/10.1016/j.polymer.2005.05.079	journal	July 2005
Model discrepancy calibration across experimental settings Maupin, Kathryn A.; Swiler, Laura P. Reliability Engineering & System Safety, Vol. 200 https://doi.org/10.1016/j.ress.2020.106818	journal	August 2020
Viscosity, Plasticity, and Diffusion as Examples of Absolute Reaction Rates Eyring, Henry The Journal of Chemical Physics, Vol. 4, Issue 4 https://doi.org/10.1063/1.1749836	journal	April 1936
A fracture model for a weak interface in a viscoelastic material (small scale yielding analysis) Hui, Chung-Yuen; Xu, Da-Ben; Kramer, Edward J. Journal of Applied Physics, Vol. 72, Issue 8 https://doi.org/10.1063/1.351451	journal	October 1992
A theory for the low-temperature plastic deformation of glassy polymers Argon, A. S. Philosophical Magazine, Vol. 28, Issue 4 https://doi.org/10.1080/14786437308220987	journal	October 1973
Rate-Dependent Cohesive Zone Modeling of Unstable Crack Growth in an Epoxy Adhesive Makhecha, Dhaval P.; Kapania, Rakesh K.; Johnson, Eric R. Mechanics of Advanced Materials and Structures, Vol. 16, Issue 1 https://doi.org/10.1080/15376490802540556	journal	January 2009
A simple technique for avoiding convergence problems in finite element simulations of crack nucleation and growth on cohesive interfaces Gao, Y. F.; Bower, A. F. Modelling and Simulation in Materials Science and Engineering, Vol. 12, Issue 3 https://doi.org/10.1088/0965-0393/12/3/007	journal	March 2004
Analytical model and molecular dynamics simulations of the size dependence of flow stress in amorphous intermetallic nanowires at temperatures near the glass transition Wei, Yujie; Bower, Allan F.; Gao, Huajian Physical Review B, Vol. 81, Issue 12 https://doi.org/10.1103/PhysRevB.81.125402	journal	March 2010
Entropic-elasticity-controlled dissociation and energetic-elasticity-controlled rupture induce catch-to-slip bonds in cell-adhesion molecules Wei, YuJie Physical Review E, Vol. 77, Issue 3 https://doi.org/10.1103/PhysRevE.77.031910	journal	March 2008
Experiment-based validation and uncertainty quantification of coupled multi-scale plasticity models Stevens, Garrison; Atamturktur, Sez; Lebensohn, Ricardo Multidiscipline Modeling in Materials and Structures, Vol. 12, Issue 1 https://doi.org/10.1108/MMMS-04-2015-0023	journal	June 2016
Bayesian calibration of computer models Kennedy, Marc C.; O'Hagan, Anthony Journal of the Royal Statistical Society: Series B (Statistical Methodology), Vol. 63, Issue 3 https://doi.org/10.1111/1467-9868.00294	journal	August 2001
Quantification of Model Uncertainty: Calibration, Model Discrepancy, and Identifiability Arendt, Paul D.; Apley, Daniel W.; Chen, Wei Journal of Mechanical Design, Vol. 134, Issue 10 https://doi.org/10.1115/1.4007390	journal	September 2012
Improving Identifiability in Model Calibration Using Multiple Responses Arendt, Paul D.; Apley, Daniel W.; Chen, Wei Journal of Mechanical Design, Vol. 134, Issue 10 https://doi.org/10.1115/1.4007573	journal	September 2012
Convergence Properties of the Nelder--Mead Simplex Method in Low Dimensions Lagarias, Jeffrey C.; Reeds, James A.; Wright, Margaret H. SIAM Journal on Optimization, Vol. 9, Issue 1 https://doi.org/10.1137/S1052623496303470	journal	January 1998
Combining Field Data and Computer Simulations for Calibration and Prediction Higdon, Dave; Kennedy, Marc; Cavendish, James C. SIAM Journal on Scientific Computing, Vol. 26, Issue 2 https://doi.org/10.1137/S1064827503426693	journal	January 2004
A Rate-Dependent Cohesive Zone Model for Adhesively Bonded Joints Loaded in Mode I Marzi, S.; Hesebeck, O.; Brede, M. Journal of Adhesion Science and Technology, Vol. 23, Issue 6 https://doi.org/10.1163/156856109X411238	journal	January 2009
Numerical Simulation of Mixed-Mode Progressive Delamination in Composite Materials Camanho, P. P.; Davila, C. G.; de Moura, M. F. Journal of Composite Materials, Vol. 37, Issue 16 https://doi.org/10.1177/0021998303034505	journal	August 2003
Rate Effects on Mode I Interlaminar Fracture Toughness in Composite Materials Smiley, A. J.; Pipes, R. B. Journal of Composite Materials, Vol. 21, Issue 7 https://doi.org/10.1177/002199838702100706	journal	July 1987
A Framework for Validation of Computer Models Bayarri, Maria J.; Berger, James O.; Paulo, Rui Technometrics, Vol. 49, Issue 2 https://doi.org/10.1198/004017007000000092	journal	May 2007
Bayesian Hierarchical Modeling for Integrating Low-Accuracy and High-Accuracy Experiments Qian, Peter Z. G.; Wu, C. F. Jeff Technometrics, Vol. 50, Issue 2 https://doi.org/10.1198/004017008000000082	journal	May 2008
Computer Model Calibration Using High-Dimensional Output Higdon, Dave; Gattiker, James; Williams, Brian Journal of the American Statistical Association, Vol. 103, Issue 482 https://doi.org/10.1198/016214507000000888	journal	June 2008
Bayesian Treed Gaussian Process Models With an Application to Computer Modeling Gramacy, Robert B.; Lee, Herbert K. H. Journal of the American Statistical Association, Vol. 103, Issue 483 https://doi.org/10.1198/016214508000000689	journal	September 2008
Ensemble samplers with affine invariance Goodman, Jonathan; Weare, Jonathan Communications in Applied Mathematics and Computational Science, Vol. 5, Issue 1 https://doi.org/10.2140/camcos.2010.5.65	journal	January 2010

Similar Records

Bayesian calibration, validation, and uncertainty quantification of diffuse interface models of tumor growth

Journal Article · 2012 · Journal of Mathematical Biology · OSTI ID:1091950

Hawkins-Daarud, Andrea; Prudhomme, Serge; van der Zee, Kristoffer G.; +1 more

A simple cohesive zone model that generates a mode-mixity dependent toughness

Journal Article · 2014 · International Journal of Solids and Structures · OSTI ID:1380004

Reedy, Jr., E. D.; Emery, J. M.

A cohesive zone-based fracture modeling capability for polymer/solid interfaces.

Conference · 2015 · OSTI ID:1247096

Chambers, Robert S.; Kropka, Jamie Michael; Stevens, Mark J.

Title: Bayesian calibration and uncertainty quantification of a rate-dependent cohesive zone model for polymer interfaces

Citation Formats

References (71)

Similar Records

Related Subjects