Strong and ductile nanoscale Ti-1Fe dual-phase alloy via deformation twinning

Liu, Chang; Chen, Jianan; Wang, Yifan; Ding, Wangwang; Tao, Qiying; Chen, Gang; Cai, Wei; Qin, Mingli; Qu, Xuanhui

doi:10.1016/j.scriptamat.2023.115720

Title: Strong and ductile nanoscale Ti-1Fe dual-phase alloy via deformation twinning

Journal Article · 30 November 2023 · Scripta Materialia

DOI: https://doi.org/10.1016/j.scriptamat.2023.115720 · OSTI ID:2369935

Liu, Chang; Chen, Jianan;

;

; Tao, Qiying; Chen, Gang; Cai, Wei; Qin, Mingli;

Not Available

View Accepted Manuscript (Publisher)

Cite

Export

Save

Sponsoring Organization:: USDOE Office of Science (SC), Basic Energy Sciences (BES)

Grant/Contract Number:: SC0010412

OSTI ID:: 2369935

Journal Information:: Scripta Materialia, Journal Name: Scripta Materialia Journal Issue: C Vol. 237; ISSN 1359-6462

Publisher:: ElsevierCopyright Statement

Country of Publication:: United States

Language:: English

References (52)

Die Ausscheidungsform des ε-Karbids im Ferrit und im Martensit beim Anlassen Pitsch, Wolfgang; Schrader, Angelica Archiv für das Eisenhüttenwesen, Vol. 29, Issue 11 https://doi.org/10.1002/srin.195803018	journal	November 1958
In situ nitridation of titanium–molybdenum alloys during laser deposition Borkar, Tushar; Gopagoni, Sundeep; Nag, Soumya Journal of Materials Science, Vol. 47, Issue 20 https://doi.org/10.1007/s10853-012-6656-z	journal	June 2012
Grain size effect on deformation twinning and detwinning Zhu, Y. T.; Liao, X. Z.; Wu, X. L. Journal of Materials Science, Vol. 48, Issue 13 https://doi.org/10.1007/s10853-013-7140-0	journal	January 2013
Twin Nucleation by Slip Transfer across Grain Boundaries in Commercial Purity Titanium Wang, L.; Yang, Y.; Eisenlohr, P. Metallurgical and Materials Transactions A, Vol. 41, Issue 2 https://doi.org/10.1007/s11661-009-0097-6	journal	November 2009
The Sintering, Sintered Microstructure and Mechanical Properties of Ti-Fe-Si Alloys Yang, Y. F.; Luo, S. D.; Schaffer, G. B. Metallurgical and Materials Transactions A, Vol. 43, Issue 12 https://doi.org/10.1007/s11661-012-1272-8	journal	July 2012
The Effect of Size on the Deformation Twinning Behavior in Hexagonal Close-Packed Ti and Mg Yu, Qian; Mishra, Raja K.; Minor, Andrew M. JOM, Vol. 64, Issue 10 https://doi.org/10.1007/s11837-012-0437-7	journal	September 2012
Microstructure and Mechanical Properties of Ti-6Al-4V Fabricated by Selective Laser Melting of Powder Produced by Granulation-Sintering-Deoxygenation Method Sun, Pei; Fang, Z. Zak; Zhang, Ying JOM, Vol. 69, Issue 12 https://doi.org/10.1007/s11837-017-2584-3	journal	September 2017
Preferred orientation relationship of intra- and inter-granular precipitates in titanium alloys Miyano, N.; Fujiwara, H.; Ameyama, K. Materials Science and Engineering: A, Vol. 333, Issue 1-2 https://doi.org/10.1016/S0921-5093(01)01829-9	journal	August 2002
Nucleation and growth of twins in Zr: A statistical study Capolungo, L.; Marshall, P. E.; McCabe, R. J. Acta Materialia, Vol. 57, Issue 20 https://doi.org/10.1016/j.actamat.2009.08.030	journal	December 2009
Perspectives on Titanium Science and Technology Banerjee, Dipankar; Williams, J. C. Acta Materialia, Vol. 61, Issue 3 https://doi.org/10.1016/j.actamat.2012.10.043	journal	February 2013
Study of twinning/detwinning behaviors of Ti by interrupted in situ tensile tests Wang, Shiying; Zhang, Yudong; Schuman, Christophe Acta Materialia, Vol. 82 https://doi.org/10.1016/j.actamat.2014.09.038	journal	January 2015
Additive manufacturing of strong and ductile Ti–6Al–4V by selective laser melting via in situ martensite decomposition Xu, W.; Brandt, M.; Sun, S. Acta Materialia, Vol. 85 https://doi.org/10.1016/j.actamat.2014.11.028	journal	February 2015
Impurity and texture driven HCP-to-FCC transformations in Ti-X thin films during in situ TEM annealing and FIB milling Traylor, Rachel; Zhang, Ruopeng; Kacher, Josh Acta Materialia, Vol. 184 https://doi.org/10.1016/j.actamat.2019.11.047	journal	February 2020
Selective laser melting of CP-Ti to overcome the low cost and high performance trade-off Tao, Qiying; Wang, Zhangwei; Chen, Gang Additive Manufacturing, Vol. 34 https://doi.org/10.1016/j.addma.2020.101198	journal	August 2020
The gradient crystalline structure and microhardness in the treated layer of TC17 via high energy shot peening Li, Huimin; Liu, Yingang; Li, Miaoquan Applied Surface Science, Vol. 357 https://doi.org/10.1016/j.apsusc.2015.09.013	journal	December 2015
Strain direction dependency of deformation mechanisms in an HCP-Ti crystalline by molecular dynamics simulations Zhang, Hao; Ou, Xiaoqin; Wei, Bingqiang Computational Materials Science, Vol. 172 https://doi.org/10.1016/j.commatsci.2019.109328	journal	February 2020
LAMMPS - a flexible simulation tool for particle-based materials modeling at the atomic, meso, and continuum scales Thompson, Aidan P.; Aktulga, H. Metin; Berger, Richard Computer Physics Communications, Vol. 271 https://doi.org/10.1016/j.cpc.2021.108171	journal	February 2022
Acicular microstructure formation and strengthening behavior of Ti-4%Fe alloys by Zr addition Teramae, Takuma; Tanaka, Takayuki; Fukuo, Mizuki Journal of Alloys and Compounds, Vol. 858 https://doi.org/10.1016/j.jallcom.2020.158292	journal	March 2021
Twinning in pure Ti subjected to monotonic simple shear deformation Tirry, W.; Bouvier, S.; Benmhenni, N. Materials Characterization, Vol. 72 https://doi.org/10.1016/j.matchar.2012.07.001	journal	October 2012
Cost-affordable, biomedical Ti-5Fe alloy developed using elemental powders and laser in-situ alloying additive manufacturing Wang, H.; Luo, H. L.; Chen, J. Q. Materials Characterization, Vol. 182 https://doi.org/10.1016/j.matchar.2021.111526	journal	December 2021
Effect of α″ martensite on the microstructure and mechanical properties of beta-type Ti–Fe–Ta alloys Haghighi, S. Ehtemam; Lu, H. B.; Jian, G. Y. Materials & Design, Vol. 76 https://doi.org/10.1016/j.matdes.2015.03.028	journal	July 2015
Improved fracture toughness by microalloying of Fe in Ti-6Al-4V Chen, Fuwen; Gu, Yulei; Xu, Guanglong Materials & Design, Vol. 185 https://doi.org/10.1016/j.matdes.2019.108251	journal	January 2020
Effect of cooling process on the α phase formation and mechanical properties of sintered Ti–Fe alloys Chen, Bor-Yuan; Hwang, Kuen-Shyang; Ng, Ka-Lok Materials Science and Engineering: A, Vol. 528, Issue 13-14 https://doi.org/10.1016/j.msea.2011.02.092	journal	May 2011
Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti–6Al–4V Simonelli, M.; Tse, Y. Y.; Tuck, C. Materials Science and Engineering: A, Vol. 616 https://doi.org/10.1016/j.msea.2014.07.086	journal	October 2014
On the influence of the heat treatment on microstructure formation and mechanical properties of near-α Ti-Fe alloys Sandlöbes, Stefanie; Korte-Kerzel, Sandra; Raabe, Dierk Materials Science and Engineering: A, Vol. 748 https://doi.org/10.1016/j.msea.2018.12.071	journal	March 2019
Microstructures analysis and quantitative strengthening evaluation of powder metallurgy Ti–Fe binary extruded alloys with (α+β)-dual-phase Umeda, Junko; Tanaka, Takayuki; Teramae, Takuma Materials Science and Engineering: A, Vol. 803 https://doi.org/10.1016/j.msea.2020.140708	journal	January 2021
Effect of α phase fraction on the dynamic mechanical behavior of a dual-phase metastable β titanium alloy Ti–10V–2Fe–3Al Chen, Zhuo; Zhong, Dongling; Sun, Qi Materials Science and Engineering: A, Vol. 816 https://doi.org/10.1016/j.msea.2021.141322	journal	June 2021
Deformation induced nanoscale twinning improves strength and ductility in additively manufactured titanium alloys Wang, Pan; Tan, Xipeng; Nai, Mui Ling Sharon Materials Science and Engineering: A, Vol. 833 https://doi.org/10.1016/j.msea.2021.142568	journal	January 2022
Evaluation of cast Ti–Fe–O–N alloys for dental applications Koike, Marie; Ohkubo, Chikahiro; Sato, Hideki Materials Science and Engineering: C, Vol. 25, Issue 3 https://doi.org/10.1016/j.msec.2005.04.002	journal	May 2005
Improved mechanical, bio-corrosion properties and in vitro cell responses of Ti-Fe alloys as candidate dental implants Niu, Jingzhe; Guo, Yanhua; Li, Kai Materials Science and Engineering: C, Vol. 122 https://doi.org/10.1016/j.msec.2021.111917	journal	March 2021
Deformation twinning in nanocrystalline materials Zhu, Y. T.; Liao, X. Z.; Wu, X. L. Progress in Materials Science, Vol. 57, Issue 1 https://doi.org/10.1016/j.pmatsci.2011.05.001	journal	January 2012
An overview of tailoring strain delocalization for strength-ductility synergy Wu, Hao; Fan, Guohua Progress in Materials Science, Vol. 113 https://doi.org/10.1016/j.pmatsci.2020.100675	journal	August 2020
A novel method for production of spherical Ti-6Al-4V powder for additive manufacturing Sun, Pei; Fang, Z. Zak; Xia, Yang Powder Technology, Vol. 301 https://doi.org/10.1016/j.powtec.2016.06.022	journal	November 2016
Evaluation of misorientation angle-axis set between variants during transformation of bcc to hcp phase obeying Burgers orientation relation Karthikeyan, T.; Saroja, S.; Vijayalakshmi, M. Scripta Materialia, Vol. 55, Issue 9 https://doi.org/10.1016/j.scriptamat.2006.07.022	journal	November 2006
Use of Schmid factors to select extension twin variants in extruded magnesium alloy tubes Godet, S.; Jiang, L.; Luo, A. Scripta Materialia, Vol. 55, Issue 11 https://doi.org/10.1016/j.scriptamat.2006.07.059	journal	December 2006
Grain growth and the Hall–Petch relationship in a high-entropy FeCrNiCoMn alloy Liu, W. H.; Wu, Y.; He, J. Y. Scripta Materialia, Vol. 68, Issue 7 https://doi.org/10.1016/j.scriptamat.2012.12.002	journal	April 2013
Reliability of reconstructed β-orientation maps in titanium alloys Germain, L.; Gey, N.; Humbert, M. Ultramicroscopy, Vol. 107, Issue 12 https://doi.org/10.1016/j.ultramic.2007.01.012	journal	November 2007
Manufacture-friendly nanostructured metals stabilized by dual-phase honeycomb shell Wang, Hai; Song, Wei; Liu, Mingfeng Nature Communications, Vol. 13, Issue 1 https://doi.org/10.1038/s41467-022-29782-8	journal	April 2022
Designing against phase and property heterogeneities in additively manufactured titanium alloys Zhang, Jingqi; Liu, Yingang; Sha, Gang Nature Communications, Vol. 13, Issue 1 https://doi.org/10.1038/s41467-022-32446-2	journal	August 2022
Additive manufacturing of ultrafine-grained high-strength titanium alloys Zhang, Duyao; Qiu, Dong; Gibson, Mark A. Nature, Vol. 576, Issue 7785 https://doi.org/10.1038/s41586-019-1783-1	journal	December 2019
Strong and ductile titanium–oxygen–iron alloys by additive manufacturing Song, Tingting; Chen, Zibin; Cui, Xiangyuan Nature, Vol. 618, Issue 7963 https://doi.org/10.1038/s41586-023-05952-6	journal	May 2023
Cryogenic ultrahigh strain rate deformation induced hybrid nanotwinned microstructure for high strength and high ductility Ye, Chang; Suslov, Sergey; Lin, Dong Journal of Applied Physics, Vol. 115, Issue 21 https://doi.org/10.1063/1.4881555	journal	June 2014
Development of an interatomic potential for the simulation of defects, plasticity, and phase transformations in titanium Mendelev, M. I.; Underwood, T. L.; Ackland, G. J. The Journal of Chemical Physics, Vol. 145, Issue 15 https://doi.org/10.1063/1.4964654	journal	October 2016
Strengthening behaviour and mechanisms of extruded powder metallurgy pure Ti materials reinforced with ubiquitous light elements Mimoto, T.; Umeda, J.; Kondoh, K. Powder Metallurgy, Vol. 59, Issue 3 https://doi.org/10.1080/00325899.2016.1148847	journal	May 2016
Plasticity of Crystals with Special Reference to Metals Dillamore, I. L. Physics Bulletin, Vol. 20, Issue 3 https://doi.org/10.1088/0031-9112/20/3/024	journal	March 1969
Interatomic potentials for atomistic simulations of the Ti-Al system Zope, Rajendra R.; Mishin, Y. Physical Review B, Vol. 68, Issue 2 https://doi.org/10.1103/PhysRevB.68.024102	journal	July 2003
Understanding How Nanocrystalline Metals Deform Hemker, Kevin J. Science, Vol. 304, Issue 5668 https://doi.org/10.1126/science.1097058	journal	April 2004
Strengthening Materials by Engineering Coherent Internal Boundaries at the Nanoscale Lu, K.; Lu, L.; Suresh, S. Science, Vol. 324, Issue 5925 https://doi.org/10.1126/science.1159610	journal	April 2009
Tribological Property of α- Pure Titanium Strengthened by Nitrogen Solid-Solution Yamabe, Yasuhiro; Umeda, Junko; Imai, Hisashi MATERIALS TRANSACTIONS, Vol. 59, Issue 1 https://doi.org/10.2320/matertrans.Y-M2017842	journal	January 2018
Effect of Alloying Elements on Mechanical Properties of Titanium Alloys for Medical Implants Okazaki, Yoshimitsu; Ito, Yoshimasa; Ito, Atsuo Materials Transactions, JIM, Vol. 34, Issue 12 https://doi.org/10.2320/matertrans1989.34.1217	journal	January 1993
Interactions between Dislocations and Boundaries during Deformation Pan, Hongjiang; He, Yue; Zhang, Xiaodan Materials, Vol. 14, Issue 4 https://doi.org/10.3390/ma14041012	journal	February 2021
Additive Manufacturing of AlSi10Mg and Ti6Al4V Lightweight Alloys via Laser Powder Bed Fusion: A Review of Heat Treatments Effects Ghio, Emanuele; Cerri, Emanuela Materials, Vol. 15, Issue 6 https://doi.org/10.3390/ma15062047	journal	March 2022

Similar Records

Strong and ductile nanoscale Ti-1Fe dual-phase alloy via deformation twinning

Journal Article · 2023 · Scripta Materialia · OSTI ID:2577127

Liu, Chang; Chen, Jianan; Wang, Yifan; +6 more

Strong and ductile niobium-based refractory alloy via deformable zirconia nanoparticles

Journal Article · 2023 · International Journal of Refractory and Hard Metals · OSTI ID:2369805

Chen, Jianan; Liu, Chang; Wang, Yifan; +6 more

Strong and ductile niobium-based refractory alloy via deformable zirconia nanoparticles

Journal Article · 2023 · International Journal of Refractory and Hard Metals · OSTI ID:2576708

Chen, Jianan; Liu, Chang; Wang, Yifan; +6 more

Title: Strong and ductile nanoscale Ti-1Fe dual-phase alloy via deformation twinning

Citation Formats

References (52)

Similar Records

Related Subjects