Enhanced joining strength in additive-manufactured polylactic-acid structures fused by embedded heated metallic meshes

Cao, Dongyang; Bouzolin, Dan; Lu, Hongbing; Griffith, D. Todd

doi:10.1016/j.jmapro.2024.04.089

Title: Enhanced joining strength in additive-manufactured polylactic-acid structures fused by embedded heated metallic meshes

Journal Article · 30 June 2024 · Journal of Manufacturing Processes

DOI: https://doi.org/10.1016/j.jmapro.2024.04.089 · OSTI ID:2352321

Cao, Dongyang; Bouzolin, Dan; Lu, Hongbing; Griffith, D. Todd

Not Available

View Accepted Manuscript (Publisher)

Cite

Export

Save

Sponsoring Organization:: USDOE

Grant/Contract Number:: NA0003962; NA0003525

OSTI ID:: 2352321

Journal Information:: Journal of Manufacturing Processes, Journal Name: Journal of Manufacturing Processes Journal Issue: C Vol. 121; ISSN 1526-6125

Publisher:: ElsevierCopyright Statement

Country of Publication:: United States

Language:: English

References (61)

Solvent-free and photocurable polyimide inks for 3D printing Guo, Yuxiong; Ji, Zhongying; Zhang, Yun Journal of Materials Chemistry A, Vol. 5, Issue 31 https://doi.org/10.1039/C7TA01952A	journal	January 2017
Metal mesh heating element size effect in resistance welding of thermoplastic composites Dubé, Martine; Hubert, Pascal; Gallet, Jan NAH Journal of Composite Materials, Vol. 46, Issue 8 https://doi.org/10.1177/0021998311412986	journal	October 2011
The global threat from plastic pollution MacLeod, Matthew; Arp, Hans Peter H.; Tekman, Mine B. Science, Vol. 373, Issue 6550 https://doi.org/10.1126/science.abg5433	journal	July 2021
A case for closed-loop recycling of post-consumer PET for automotive foams Bedell, Matthew; Brown, Matthew; Kiziltas, Alper Waste Management, Vol. 71 https://doi.org/10.1016/j.wasman.2017.10.021	journal	January 2018
An overview of the polymer-to-metal direct-adhesion hybrid technologies for load-bearing automotive components Grujicic, M.; Sellappan, V.; Omar, M. A. Journal of Materials Processing Technology, Vol. 197, Issue 1-3 https://doi.org/10.1016/j.jmatprotec.2007.06.058	journal	February 2008
3D printing of polymer matrix composites: A review and prospective Wang, Xin; Jiang, Man; Zhou, Zuowan Composites Part B: Engineering, Vol. 110 https://doi.org/10.1016/j.compositesb.2016.11.034	journal	February 2017
Experimental investigation of the resistance welding for thermoplastic-matrix composites. Part I: heating element and heat transfer Ageorges, Christophe; Ye, Lin; Hou, Meng Composites Science and Technology, Vol. 60, Issue 7 https://doi.org/10.1016/S0266-3538(00)00005-1	journal	May 2000
Reprintable Polymers for Digital Light Processing 3D Printing Zhu, Guangda; Hou, Yi; Xu, Jian Advanced Functional Materials, Vol. 31, Issue 9 https://doi.org/10.1002/adfm.202007173	journal	December 2020
Solid‐state recycling of polyimide film waste Olifirov, L. K.; Kaloshkin, S. D.; Ergin, K. S. Journal of Applied Polymer Science, Vol. 127, Issue 4 https://doi.org/10.1002/app.37964	journal	May 2012
Ultrafast Microwave Welding/Reinforcing Approach at the Interface of Thermoplastic Materials Poyraz, Selcuk; Zhang, Lin; Schroder, Albrecht ACS Applied Materials & Interfaces, Vol. 7, Issue 40 https://doi.org/10.1021/acsami.5b06484	journal	September 2015
Effects of welding procedures on mechanical and morphological properties of hot gas butt welded PE, PP, and PVC sheets Balkan, Onur; Demirer, Halil; Ezdeşir, Ayhan Polymer Engineering & Science, Vol. 48, Issue 4 https://doi.org/10.1002/pen.21014	journal	February 2008
Experimental analysis on mechanical interlocking of metal–polymer direct joining Zhao, Shuaijie; Kimura, Fuminobu; Kadoya, Shotaro Precision Engineering, Vol. 61 https://doi.org/10.1016/j.precisioneng.2019.10.009	journal	January 2020
Recycling and Reprocessing of Thermoplastic Polyurethane Materials towards Nonwoven Processing Wölfel, Bastian; Seefried, Andreas; Allen, Vincent Polymers, Vol. 12, Issue 9 https://doi.org/10.3390/polym12091917	journal	August 2020
United States plastics: Large flows, short lifetimes, and negligible recycling Di, Jinghan; Reck, Barbara K.; Miatto, Alessio Resources, Conservation and Recycling, Vol. 167 https://doi.org/10.1016/j.resconrec.2021.105440	journal	April 2021
Advances in fusion bonding techniques for joining thermoplastic matrix composites: a review Ageorges, C.; Ye, L.; Hou, M. Composites Part A: Applied Science and Manufacturing, Vol. 32, Issue 6 https://doi.org/10.1016/S1359-835X(00)00166-4	journal	June 2001
Measurement and evaluation of joint properties in friction stir welding of ABS sheets reinforced by nanosilica addition Azhiri, Reza Bagherian; Mehdizad Tekiyeh, Ramin; Zeynali, Ebrahim Measurement, Vol. 127 https://doi.org/10.1016/j.measurement.2018.05.005	journal	October 2018
Bending behavior of sandwich composite structures with tunable 3D-printed core materials Li, Tiantian; Wang, Lifeng Composite Structures, Vol. 175 https://doi.org/10.1016/j.compstruct.2017.05.001	journal	September 2017
Thermoplastic Composites and Their Promising Applications in Joining and Repair Composites Structures: A Review Reis, João Pedro; de Moura, Marcelo; Samborski, Sylwester Materials, Vol. 13, Issue 24 https://doi.org/10.3390/ma13245832	journal	December 2020
Composition analysis and characterization of waste polyvinyl chloride (PVC) recovered from data cables Suresh, Sunil S.; Mohanty, Smita; Nayak, Sanjay K. Waste Management, Vol. 60 https://doi.org/10.1016/j.wasman.2016.08.033	journal	February 2017
Review on melt flow simulations for thermoplastics and their fiber reinforced composites in fused deposition modeling Xu, Xuguang; Ren, Huilin; Chen, Shengyang Journal of Manufacturing Processes, Vol. 92 https://doi.org/10.1016/j.jmapro.2023.02.039	journal	April 2023
Reprocessing acrylonitrile–butadiene–styrene plastics: Structure–property relationships Bai, Xiaojuan; Isaac, D. H.; Smith, K. Polymer Engineering & Science, Vol. 47, Issue 2 https://doi.org/10.1002/pen.20681	journal	January 2007
Chemical recycling of post-consumer PET wastes by glycolysis in the presence of metal salts López-Fonseca, R.; Duque-Ingunza, I.; de Rivas, B. Polymer Degradation and Stability, Vol. 95, Issue 6 https://doi.org/10.1016/j.polymdegradstab.2010.03.007	journal	June 2010
Study on resistance welding of glass fiber reinforced thermoplastic composites Panneerselvam, K.; Aravindan, S.; Noorul Haq, A. Materials & Design, Vol. 41 https://doi.org/10.1016/j.matdes.2012.05.025	journal	October 2012
Welding of thermoplastics by means of carbon-nanotube web Russello, M.; Catalanotti, G.; Hawkins, S. C. Composites Communications, Vol. 17 https://doi.org/10.1016/j.coco.2019.11.001	journal	February 2020
Chemical and biological catalysis for plastics recycling and upcycling Ellis, Lucas D.; Rorrer, Nicholas A.; Sullivan, Kevin P. Nature Catalysis, Vol. 4, Issue 7 https://doi.org/10.1038/s41929-021-00648-4	journal	July 2021
State of the art in recycling waste thermoplastics and thermosets and their applications in construction Kazemi, Mohammadjavad; Faisal Kabir, Sk; Fini, Elham H. Resources, Conservation and Recycling, Vol. 174 https://doi.org/10.1016/j.resconrec.2021.105776	journal	November 2021
Predicted growth in plastic waste exceeds efforts to mitigate plastic pollution Borrelle, Stephanie B.; Ringma, Jeremy; Law, Kara Lavender Science, Vol. 369, Issue 6510 https://doi.org/10.1126/science.aba3656	journal	September 2020
Mechanical and chemical recycling of solid plastic waste Ragaert, Kim; Delva, Laurens; Van Geem, Kevin Waste Management, Vol. 69 https://doi.org/10.1016/j.wasman.2017.07.044	journal	November 2017
Effect of reprocessing on shrinkage and mechanical properties of ABS and investigating the proper blend of virgin and recycled ABS in injection molding Rahimi, Mohammad; Esfahanian, Mohsen; Moradi, Mehran Journal of Materials Processing Technology, Vol. 214, Issue 11 https://doi.org/10.1016/j.jmatprotec.2014.04.028	journal	November 2014
Residual stresses in thermoplastic composites – a study of the literature. Part III: Effects of thermal residual stresses Parlevliet, Patricia P.; Bersee, Harald E. N.; Beukers, Adriaan Composites Part A: Applied Science and Manufacturing, Vol. 38, Issue 6 https://doi.org/10.1016/j.compositesa.2006.12.005	journal	June 2007
Towards closed-loop recycling of multilayer and coloured PET plastic waste by alkaline hydrolysis Ügdüler, Sibel; Van Geem, Kevin M.; Denolf, Ruben Green Chemistry, Vol. 22, Issue 16 https://doi.org/10.1039/D0GC00894J	journal	January 2020
Deformation measurements by digital image correlation: Implementation of a second-order displacement gradient Lu, H.; Cary, P. D. Experimental Mechanics, Vol. 40, Issue 4 https://doi.org/10.1007/BF02326485	journal	December 2000
Structure and mechanical behavior of Big Area Additive Manufacturing (BAAM) materials Duty, Chad E.; Kunc, Vlastimil; Compton, Brett Rapid Prototyping Journal, Vol. 23, Issue 1 https://doi.org/10.1108/RPJ-12-2015-0183	journal	January 2017
Resistance welding of glass fiber reinforced PET: Effect of weld pressure and heating element geometry Warren, Kyle C.; Lopez-Anido, Roberto A.; Freund, Adam L. Journal of Reinforced Plastics and Composites, Vol. 35, Issue 12 https://doi.org/10.1177/0731684416633516	journal	March 2016
The Interfacial Shear Strength of Carbon Nanotube Sheet Modified Carbon Fiber Composites Wang, Xuemin; Xu, Tingge; de Andrade, Monica Jung Challenges in Mechanics of Time Dependent Materials, Volume 2 https://doi.org/10.1007/978-3-030-59542-5_4	book	April 2021
Emerging 3D-Printed Electrochemical Energy Storage Devices: A Critical Review Tian, Xiaocong; Jin, Jun; Yuan, Shangqin Advanced Energy Materials, Vol. 7, Issue 17 https://doi.org/10.1002/aenm.201700127	journal	May 2017
Ultrasonic welding of metal to fiber-reinforced thermoplastic composites: A review Liu, Zeguang; Li, Yang; Liu, Zhiwei Journal of Manufacturing Processes, Vol. 85 https://doi.org/10.1016/j.jmapro.2022.12.001	journal	January 2023
An overview on joining/welding as post-processing technique to circumvent the build volume limitation of an FDM-3D printer Tiwary, Vivek Kumar; P., Arunkumar; Malik, Vinayak R. Rapid Prototyping Journal, Vol. 27, Issue 4 https://doi.org/10.1108/RPJ-10-2020-0265	journal	May 2021
Critical advances and future opportunities in upcycling commodity polymers Jehanno, Coralie; Alty, Jill W.; Roosen, Martijn Nature, Vol. 603, Issue 7903 https://doi.org/10.1038/s41586-021-04350-0	journal	March 2022
Resistance welding technology of fiber reinforced polymer composites: a review Xiong, Xuhai; Wang, Daosheng; Wei, Jian Journal of Adhesion Science and Technology, Vol. 35, Issue 15 https://doi.org/10.1080/01694243.2020.1856514	journal	January 2021
Mechanical properties of sandwich composites with 3d-printed auxetic and non-auxetic lattice cores under low velocity impact Hou, Shaoyu; Li, Tiantian; Jia, Zian Materials & Design, Vol. 160 https://doi.org/10.1016/j.matdes.2018.11.002	journal	December 2018
Resistance welding of thermoplastic composites skin/stringer joints Dubé, M.; Hubert, P.; Yousefpour, A. Composites Part A: Applied Science and Manufacturing, Vol. 38, Issue 12 https://doi.org/10.1016/j.compositesa.2007.07.014	journal	December 2007
Degradation of poly(ethylene terephthalate) catalyzed by metal-free choline-based ionic liquids Liu, Yachan; Yao, Xiaoqian; Yao, Haoyu Green Chemistry, Vol. 22, Issue 10 https://doi.org/10.1039/D0GC00327A	journal	January 2020
Laser transmission welding of polymers – A review on process fundamentals, material attributes, weldability, and welding techniques Acherjee, Bappa Journal of Manufacturing Processes, Vol. 60 https://doi.org/10.1016/j.jmapro.2020.10.017	journal	December 2020
Induction heated tool assisted friction-stir welding (i-FSW): A novel hybrid process for joining of thermoplastics Vijendra, Bandari; Sharma, Abhay Journal of Manufacturing Processes, Vol. 20 https://doi.org/10.1016/j.jmapro.2015.07.005	journal	October 2015
Rapid Open‐Air Digital Light 3D Printing of Thermoplastic Polymer Deng, Shihong; Wu, Jingjun; Dickey, Michael D. Advanced Materials, Vol. 31, Issue 39 https://doi.org/10.1002/adma.201903970	journal	August 2019
Scaffolding polymeric biomaterials: Are naturally occurring biological macromolecules more appropriate for tissue engineering? Abbasian, Mojtaba; Massoumi, Bakhshali; Mohammad-Rezaei, Rahim International Journal of Biological Macromolecules, Vol. 134 https://doi.org/10.1016/j.ijbiomac.2019.04.197	journal	August 2019
Resistance Welding of Graphite Polyetheretherketone Composites: An Experimental Investigation Eveno, Eric C.; Gillespie, John W. Journal of Thermoplastic Composite Materials, Vol. 1, Issue 4 https://doi.org/10.1177/089270578800100402	journal	October 1988
Internal resistance heating for homogeneous curing of adhesively bonded repairs Rider, A. N.; Wang, C. H.; Cao, J. International Journal of Adhesion and Adhesives, Vol. 31, Issue 3 https://doi.org/10.1016/j.ijadhadh.2011.01.001	journal	April 2011
Effect of stiffness matrices terms on delamination front shape in laminates with elastic couplings Rzeczkowski, Jakub; Samborski, Sylwester; Valvo, Paolo S. Composite Structures, Vol. 233 https://doi.org/10.1016/j.compstruct.2019.111547	journal	February 2020
Analytical and Numerical Residual Stress Models for Fiber Metal Laminates – Comparison and Application Hausmann, J.; Naghipour, P.; Schulze, K. Procedia Materials Science, Vol. 2 https://doi.org/10.1016/j.mspro.2013.02.009	journal	January 2013
Properties of lactic acid based polymers and their correlation with composition Södergård, Anders; Stolt, Mikael Progress in Polymer Science, Vol. 27, Issue 6 https://doi.org/10.1016/S0079-6700(02)00012-6	journal	July 2002
Adhesive bonding of 3D-printed plastic components Leicht, Heinrich; Orf, Lukas; Hesselbach, Julian The Journal of Adhesion, Vol. 96, Issue 1-4 https://doi.org/10.1080/00218464.2019.1682561	journal	October 2019
Continuous fibre-reinforced thermoplastic acrylic-matrix composites prepared by liquid resin infusion – A review Obande, Winifred; Ó Brádaigh, Conchúr M.; Ray, Dipa Composites Part B: Engineering, Vol. 215 https://doi.org/10.1016/j.compositesb.2021.108771	journal	June 2021
Improving the mechanical performance of resistance-welded green composite joints using different heating elements Roy Choudhury, Mridusmita; Debnath, Kishore Polymer Testing, Vol. 94 https://doi.org/10.1016/j.polymertesting.2021.107059	journal	February 2021
Thermal conductive composites for FDM 3D printing: A review, opportunities and obstacles, future directions Roudný, Petr; Syrový, Tomáš Journal of Manufacturing Processes, Vol. 83 https://doi.org/10.1016/j.jmapro.2022.09.026	journal	November 2022
Depolymerization of PET waste to potentially applicable aromatic amides: Their characterization and DFT study Teotia, Meenu; Tarannum, Nazia; Soni, Rakesh Kumar Journal of Applied Polymer Science, Vol. 134, Issue 31 https://doi.org/10.1002/app.45153	journal	April 2017
Fusion Bonding/Welding of Thermoplastic Composites Yousefpour, Ali; Hojjati, Mehdi; Immarigeon, Jean-Pierre Journal of Thermoplastic Composite Materials, Vol. 17, Issue 4 https://doi.org/10.1177/0892705704045187	journal	July 2004
Mechanical properties of thermoplastic polyurethane elastomers with mica and aluminum trihydrate Pinto, Ubirajara Almeida; Visconte, Leila Léa Yuan; Reis Nunes, Regina Célia European Polymer Journal, Vol. 37, Issue 9 https://doi.org/10.1016/S0014-3057(01)00069-6	journal	September 2001
Influence of reprocessing on the mechanical properties and structure of polyamide 6 Su, Kuan-Hua; Lin, Jia-Horng; Lin, Chih-Ching Journal of Materials Processing Technology, Vol. 192-193 https://doi.org/10.1016/j.jmatprotec.2007.04.056	journal	October 2007
Fusion joining of thermoplastic composite wind turbine blades: Lap-shear bond characterization Murray, Robynne E.; Roadman, Jason; Beach, Ryan Renewable Energy, Vol. 140 https://doi.org/10.1016/j.renene.2019.03.085	journal	September 2019

Similar Records

In-Situ Printing of Conductive Polylactic Acid (cPLA) Strain Sensors Embedded into Additively Manufactured Parts using Fused Deposition Modeling

Technical Report · 2018 · OSTI ID:1422947

Ouellette, Brittany Joy

Properties of Inconel 625 mesh structures grown by electron beam additive manufacturing

Journal Article · 2014 · Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing · OSTI ID:1496317

List, F. A.; Dehoff, R. R.; Lowe, L. E.; +1 more

Tunable Porosity in Fused Filament 3D-Printed Blends of Intrinsically Porous Polymer and Thermoplastic Aliphatic Polyesters Polycaprolactone and Polylactic Acid

Journal Article · 2019 · ACS Applied Polymer Materials · OSTI ID:1573345

Kennedy, Zachary C.; Christ, Josef F.; Arey, Bruce W.; +2 more

Title: Enhanced joining strength in additive-manufactured polylactic-acid structures fused by embedded heated metallic meshes

Citation Formats

References (61)

Similar Records

Related Subjects