Flow Strength Measurements of Wrought and AM SS304L via Pressure Shear Plate Impact Experiments

Johnson, Christopher R.; Borg, John P.; Alexander, Charles S.; LaJeunesse, Jeffrey Wilson; Helminiak, Nathaniel S.; Specht, Paul Elliott

doi:10.1007/s40870-023-00388-5

Title: Flow Strength Measurements of Wrought and AM SS304L via Pressure Shear Plate Impact Experiments

Journal Article · 30 August 2023 · Journal of Dynamic Behavior of Materials

DOI: https://doi.org/10.1007/s40870-023-00388-5 · OSTI ID:2345302

^[1]; Borg, John P. ^[2]; Alexander, Charles S. ^[3]; LaJeunesse, Jeffrey Wilson ^[3]; Helminiak, Nathaniel S. ^[4]; Specht, Paul Elliott ^[3]

Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Marquette Univ., Milwaukee, WI (United States)
Marquette Univ., Milwaukee, WI (United States)
Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
United States Military Academy, West Point, NY (United States); Marquette Univ., Milwaukee, WI (United States)

Pressure-shear plate impact experiments were performed to quantify flow strength of wrought, as-built additively manufactured (AM), and heat-treated and recrystallized AM 304 L stainless steel (SS304L) under combined loading. Impact velocities spanned between 0.03 and 0.24 mm/μs, resulting in corresponding pressures of 0.62–5.93 GPa. Flow strength measurements are comparable for the sample variants across the studied loading conditions; however, shear wave structures significantly differ between sample type. Microstructurally aware simulations indicate local strain differences attributed to anisotropic elastic constants of large grains (~1 mm) in the as-built and heat-treated AM may impede the ability to uniformly transmit a shear wave.

View Accepted Manuscript (DOE)

Cite

Export

Save

Research Organization:: Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)

Sponsoring Organization:: USDOE National Nuclear Security Administration (NNSA)

Grant/Contract Number:: NA0003525

OSTI ID:: 2345302

Report Number(s):: SAND--2024-05350J

Journal Information:: Journal of Dynamic Behavior of Materials, Journal Name: Journal of Dynamic Behavior of Materials Journal Issue: 1 Vol. 10; ISSN 2199-7446

Publisher:: SpringerCopyright Statement

Country of Publication:: United States

Language:: English

References (34)

Dynamic Behavior of Materials Meyers, Marc Andre https://doi.org/10.1002/9780470172278	book	September 1994
Effects of Strain State and Strain Rate on Deformation-Induced Transformation in 304 Stainless Steel: Part I. Magnetic Measurements and Mechanical Behavior Hecker, S. S.; Stout, M. G.; Staudhammer, K. P. Metallurgical Transactions A, Vol. 13, Issue 4 https://doi.org/10.1007/BF02644427	journal	April 1982
Effects of Strain State and Strain Rate on Deformation-Induced Transformation in 304 Stainless Steel: Part II. Microstructural Study Murr, L. E.; Staudhammer, K. P.; Hecker, S. S. Metallurgical Transactions A, Vol. 13, Issue 4 https://doi.org/10.1007/BF02644428	journal	April 1982
The effect of grain size on the shock-loading response of 304-type stainless steel Kestenbach, H. -J.; Meyers, Marc A. Metallurgical Transactions A, Vol. 7, Issue 11 https://doi.org/10.1007/BF02654992	journal	November 1976
Comparative study of the impact response and microstructure of 304L stainless steel with and without prestrain Lee, Woei-Shyan; Lin, Chi-Feng Metallurgical and Materials Transactions A, Vol. 33, Issue 9 https://doi.org/10.1007/s11661-002-0265-4	journal	September 2002
In Situ Neutron Diffraction Study of the Influence of Microstructure on the Mechanical Response of Additively Manufactured 304L Stainless Steel Brown, D. W.; Adams, D. P.; Balogh, L. Metallurgical and Materials Transactions A, Vol. 48, Issue 12 https://doi.org/10.1007/s11661-017-4330-4	journal	October 2017
Using In Situ Neutron Diffraction to Isolate Specific Features of Additively Manufactured Microstructures in 304L Stainless Steel and Identify Their Effects on Macroscopic Strength Brown, D. W.; Adams, D. P.; Balogh, L. Metallurgical and Materials Transactions A, Vol. 50, Issue 7 https://doi.org/10.1007/s11661-019-05240-x	journal	May 2019
Compressive and Tensile Stress–Strain Responses of Additively Manufactured (AM) 304L Stainless Steel at High Strain Rates Song, B.; Nishida, E.; Sanborn, B. Journal of Dynamic Behavior of Materials, Vol. 3, Issue 3 https://doi.org/10.1007/s40870-017-0122-6	journal	June 2017
Pressure-Shear Plate Impact Experiments at High Pressures Kettenbeil, C.; Lovinger, Z.; Ravindran, S. Journal of Dynamic Behavior of Materials, Vol. 6, Issue 4 https://doi.org/10.1007/s40870-020-00250-y	journal	June 2020
Dynamic Strength of Copper at High Pressures Using Pressure Shear Plate Experiments Ravindran, Suraj; Gandhi, Vatsa; Lovinger, Zev Journal of Dynamic Behavior of Materials, Vol. 7, Issue 2 https://doi.org/10.1007/s40870-020-00287-z	journal	January 2021
Pressure-shear waves in 6061-T6 aluminum and alpha-titanium Gilat, A.; Clifton, R. J. Journal of the Mechanics and Physics of Solids, Vol. 33, Issue 3 https://doi.org/10.1016/0022-5096(85)90015-8	journal	January 1985
Finite element simulations of shear localization in plate impact Zhou, M.; Needleman, A.; Clifton, R. J. Journal of the Mechanics and Physics of Solids, Vol. 42, Issue 3 https://doi.org/10.1016/0022-5096(94)90026-4	journal	March 1994
Pressure-shear impact and the dynamic viscoplastic response of metals Klopp, R. W.; Clifton, R. J.; Shawki, T. G. Mechanics of Materials, Vol. 4, Issue 3-4 https://doi.org/10.1016/0167-6636(85)90033-X	journal	December 1985
CTH: A three-dimensional shock wave physics code McGlaun, J. M.; Thompson, S. L.; Elrick, M. G. International Journal of Impact Engineering, Vol. 10, Issue 1-4 https://doi.org/10.1016/0734-743X(90)90071-3	journal	January 1990
Experimental data and hydrocode calculations for hypervelocity impacts of stainless steel into aluminium in the 2–8 km/s range Harrison, W.; Loupias, C.; Outrebon, P. International Journal of Impact Engineering, Vol. 17, Issue 1-3 https://doi.org/10.1016/0734-743X(95)99862-L	journal	January 1995
The Equation of State of Solids from Shock Wave Studies McQueen, R. G.; Marsh, S. P.; Taylor, J. W. High-Velocity Impact Phenomena https://doi.org/10.1016/B978-0-12-408950-1.50012-4	book	January 1970
Impact properties and microstructure evolution of 304L stainless steel Lee, Woei-Shyan; Lin, Chi-Feng Materials Science and Engineering: A, Vol. 308, Issue 1-2 https://doi.org/10.1016/S0921-5093(00)02024-4	journal	June 2001
Microstructural evolution in adiabatic shear localization in stainless steel Meyers, M. A.; Xu, Y. B.; Xue, Q. Acta Materialia, Vol. 51, Issue 5 https://doi.org/10.1016/S1359-6454(02)00526-8	journal	March 2003
Effect of processing parameters on microstructure and tensile properties of austenitic stainless steel 304L made by directed energy deposition additive manufacturing Wang, Zhuqing; Palmer, Todd A.; Beese, Allison M. Acta Materialia, Vol. 110 https://doi.org/10.1016/j.actamat.2016.03.019	journal	May 2016
High strain-rate shear and friction characterization of fully-dense polyurethane and epoxy Sable, Peter; Neel, Christopher H.; Borg, John P. International Journal of Impact Engineering, Vol. 138 https://doi.org/10.1016/j.ijimpeng.2019.103472	journal	April 2020
Mechanical properties of Austenitic Stainless Steel 304L and 316L at elevated temperatures Desu, Raghuram Karthik; Nitin Krishnamurthy, Hansoge; Balu, Aditya Journal of Materials Research and Technology, Vol. 5, Issue 1 https://doi.org/10.1016/j.jmrt.2015.04.001	journal	January 2016
Dynamic compressive response of wrought and additive manufactured 304L stainless steels Nishida, Erik; Song, Bo; Maguire, Michael EPJ Web of Conferences, Vol. 94 https://doi.org/10.1051/epjconf/20159401001	journal	January 2015
Dynamic Compression of Iron Single Crystals Jensen, B. J. SHOCK COMPRESSION OF CONDENSED MATTER - 2005: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter, AIP Conference Proceedings https://doi.org/10.1063/1.2263306	conference	January 2006
Longitudinal and Lateral Stress Measurements in Stainless Steel 304l Under 1d Shock Loading Whiteman, G.; Millett, J. C. F.; Bourne, N. K. AIP Conference Proceedings https://doi.org/10.1063/1.2833191	conference	January 2008
A constitutive model for metals applicable at high‐strain rate Steinberg, D. J.; Cochran, S. G.; Guinan, M. W. Journal of Applied Physics, Vol. 51, Issue 3 https://doi.org/10.1063/1.327799	journal	March 1980
Magnetically applied pressure-shear: A new method for direct measurement of strength at high pressure Alexander, C. S.; Asay, J. R.; Haill, T. A. Journal of Applied Physics, Vol. 108, Issue 12 https://doi.org/10.1063/1.3517790	journal	December 2010
On the dynamic strength of 304l stainless steel under impact Werdiger, Meir; Glam, Benny; Bakshi, Lior SHOCK COMPRESSION OF CONDENSED MATTER - 2011: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter, AIP Conference Proceedings https://doi.org/10.1063/1.3686483	conference	January 2012
Comparative shock response of additively manufactured versus conventionally wrought 304L stainless steel Wise, J. L.; Adams, D. P.; Nishida, E. E. AIP Conference Proceedings https://doi.org/10.1063/1.4971640	conference	January 2017
Isotropic phase transition of single-crystal iron (Fe) under shock compression Liu, Xun; Mashimo, Tsutomu; Kawai, Nobuaki Journal of Applied Physics, Vol. 124, Issue 21 https://doi.org/10.1063/1.5040683	journal	December 2018
The Effect of Stress-State on the Large Strain Inelastic Deformation Behavior of 304L Stainless Steel Miller, M. P.; McDowell, D. L. Journal of Engineering Materials and Technology, Vol. 118, Issue 1 https://doi.org/10.1115/1.2805930	journal	January 1996
Strain Rate Sensitivity, Strain Hardening, and Yield Behavior of 304L Stainless Steel Stout, M. G.; Follansbee, P. S. Journal of Engineering Materials and Technology, Vol. 108, Issue 4 https://doi.org/10.1115/1.3225893	journal	October 1986
Plane Waves in an Elastic-Plastic Half-Space Due to Combined Surface Pressure and Shear Bleich, H. H.; Nelson, Ivan Journal of Applied Mechanics, Vol. 33, Issue 1 https://doi.org/10.1115/1.3624972	journal	March 1966
Effects of prestrain and strain rate on dynamic deformation characteristics of 304L stainless steel: Part 1—Mechanical behaviour Lee, W. -S.; Lin, C. -F. Materials Science and Technology, Vol. 18, Issue 8 https://doi.org/10.1179/026708302225004711	journal	August 2002
Elastic Anisotropy and Its Temperature Dependence of Single Crystals and Polycrystal of 18–12 Type Stainless Steel Kikuchi, Michio Transactions of the Japan Institute of Metals, Vol. 12, Issue 6 https://doi.org/10.2320/matertrans1960.12.417	journal	January 1971

Similar Records

Microstructure dependent shear localization in 316L SS

Journal Article · 2023 · AIP Conference Proceedings · OSTI ID:2246839

Anghel, Veronica; Trujillo, Carl P.; Martinez, Ramon M.; +1 more

A comparison of adiabatic shear bands in wrought and additively manufactured 316L stainless steel using nanoindentation and electron backscatter diffraction

Journal Article · 2019 · Journal of Materials Science · OSTI ID:1571603

Weaver, Jordan S.; Livescu, Veronica; Mara, Nathan A.

Structure/property (constitutive and spallation response) of additively manufactured 316L stainless steel

Journal Article · 2017 · Acta Materialia · OSTI ID:1463491

Gray, G. T.; Livescu, V.; Rigg, P. A.; +6 more

Related Subjects

36 MATERIALS SCIENCE
SS304L
additive manufacturing
combined loading
dynamic properties
flow strength
pressure shear
process structure properties

Title: Flow Strength Measurements of Wrought and AM SS304L via Pressure Shear Plate Impact Experiments

Citation Formats

References (34)

Similar Records

Related Subjects