Title: Design Principles of Diketopyrrolopyrrole‐Thienopyrrolodione Acceptor 1 –Acceptor 2 Copolymers

Journal Article · · Advanced Functional Materials
 [1];  [2];  [3];  [4];  [3];  [2];  [2];  [2];  [5];  [6];  [3];  [7];  [5];  [8]; ORCiD logo [3]
  1. Applied Functional Polymers University of Bayreuth Universitätsstraße 30 95447 Bayreuth Germany, Department of Materials Science and Engineering Monash University Wellington Road Clayton Victoria 3800 Australia
  2. Applied Functional Polymers University of Bayreuth Universitätsstraße 30 95447 Bayreuth Germany
  3. Department of Materials Science and Engineering Monash University Wellington Road Clayton Victoria 3800 Australia
  4. Department of Materials Science and Engineering Monash University Wellington Road Clayton Victoria 3800 Australia, Dynamics and Structure Formation – Herzig Group University of Bayreuth Universitätsstraße 30 95447 Bayreuth Germany
  5. The Molecular Foundry Lawrence Berkeley National Laboratory 1 Cyclotron Road Berkeley CA 94720 USA
  6. Australian Synchrotron, ANSTO Clayton Victoria 3168 Australia
  7. Dynamics and Structure Formation – Herzig Group University of Bayreuth Universitätsstraße 30 95447 Bayreuth Germany
  8. Applied Functional Polymers University of Bayreuth Universitätsstraße 30 95447 Bayreuth Germany, Bavarian Polymer Institute (BPI) University of Bayreuth Universitätsstraße 30 95447 Bayreuth Germany

Abstract The design principles of acceptor 1 –acceptor 2 copolymers featuring alternating diketopyrrolopyrrole (DPP) and thienopyrrolodione (TPD) moieties are investigated. The investigated series of polymers is obtained by varying the aromatic linker between the two acceptor motifs between thiophene, thiazole, pyridine, and benzene. High electron affinities between 3.96 and 4.42 eV, facilitated by the synergy of the acceptor motifs are determined with optical gaps between 1.37 and 2.02 eV. Grazing incidence wide‐angle X‐ray scattering studies reveal a range of film morphologies after thermal annealing, including face‐on, end‐on and superstructure edge‐on‐like crystallites. Conversely, all materials form thin edge‐on layers on the polymer–air interface, as demonstrated by multi‐elemental near‐edge X‐ray absorption fine‐structure spectroscopy. The benefit of the electron‐deficient linkers thiazole and pyridine is evident: In organic field effect transistors, electron mobilities of up to 4.6 × 10 −2 cm 2 V −1 s −1 are obtained with outstanding on/off current ratios of 5 × 10 5 , facilitated by the absence of detectable hole transport in these materials. Viability for all‐polymer solar cells is assessed in active layer blends with the donor polymer PM6, yielding a maximum average power conversion efficiency of 4.8% and an open circuit voltage above 1 V.

Research Organization:
Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States)
Sponsoring Organization:
USDOE; USDOE Office of Science (SC), Basic Energy Sciences (BES). Scientific User Facilities (SUF)
Grant/Contract Number:
AC02-05CH11231
OSTI ID:
2339678
Journal Information:
Advanced Functional Materials, Journal Name: Advanced Functional Materials Journal Issue: 32 Vol. 34; ISSN 1616-301X
Publisher:
Wiley Blackwell (John Wiley & Sons)Copyright Statement
Country of Publication:
Germany
Language:
English

References (61)

Electronic Processes in Organic Semiconductors: An Introduction book March 2015
High Bulk Electron Mobility Diketopyrrolopyrrole Copolymers with Perfluorothiophene journal March 2015
Electrical Double-Slope Nonideality in Organic Field-Effect Transistors journal February 2018
Polydiketopyrrolopyrroles Carrying Ethylene Glycol Substituents as Efficient Mixed Ion‐Electron Conductors for Biocompatible Organic Electrochemical Transistors journal March 2021
A Difluoro‐Monobromo End Group Enables High‐Performance Polymer Acceptor and Efficient All‐Polymer Solar Cells Processable with Green Solvent under Ambient Condition journal May 2021
Highly Efficient n‐Doping via Proton Abstraction of an Acceptor1‐Acceptor2 Alternating Copolymer toward Thermoelectric Applications journal April 2023
HOMO–HOMO Electron Transfer: An Elegant Strategy for p‐Type Doping of Polymer Semiconductors toward Thermoelectric Applications journal September 2020
Influence of Molecular Weight on the Organic Electrochemical Transistor Performance of Ladder‐Type Conjugated Polymers journal December 2021
The Energy Level Conundrum of Organic Semiconductors in Solar Cells journal July 2022
One‐Step Sixfold Cyanation of Benzothiadiazole Acceptor Units for Air‐Stable High‐Performance n‐Type Organic Field‐Effect Transistors journal January 2021
Accessing New DPP-Based Copolymers by Direct Heteroarylation Polymerization journal November 2012
Principles of Structural Design of Conjugated Polymers Showing Excellent Charge Transport toward Thermoelectrics and Bioelectronics Applications journal March 2019
Control of aggregate formation in poly(3-hexylthiophene) by solvent, molecular weight, and synthetic method journal December 2011
Correlation of charge transport with structural order in highly ordered melt-crystallized poly(3-hexylthiophene) thin films journal April 2013
Performance of the Vienna ab initio simulation package (VASP) in chemical applications journal April 2003
Calibrated NEXAFS spectra of some common polymers journal January 2003
Optimizing thermoelectric performance of two-dimensional donor-donor benzodithiophene-based conjugated polymers using backbone engineering journal January 2023
Thiophene vs thiazole: Effect of the π-connector on the properties of phthalimide end-capped diketopyrrolopyrrole based molecular acceptors for organic photovoltaics journal February 2017
NEXAFS spectroscopy of conjugated polymers journal August 2016
Acceptor–acceptor-type conjugated polymer semiconductors journal August 2021
First-principles investigations on the contact electrification mechanism between metal and amorphous polymers for triboelectric nanogenerators journal September 2019
Recent development of n-type thermoelectric materials based on conjugated polymers journal June 2021
Control of Molecular Orientation in Polydiketopyrrolopyrrole Copolymers via Diffusive Noncovalent Interactions journal September 2016
Imide-Functionalized Thiazole-Based Polymer Semiconductors: Synthesis, Structure–Property Correlations, Charge Carrier Polarity, and Thin-Film Transistor Performance journal October 2018
High-Performance Organic Electrochemical Transistors Based on Conjugated Polyelectrolyte Copolymers journal June 2019
First-Principles Study on the Electronic Properties of PDPP-Based Conjugated Polymer via Density Functional Theory journal July 2021
Highly Efficient and Balanced Charge Transport in Thieno[3,4-c]pyrrole-4,6-dione Copolymers: Dramatic Influence of Thieno[3,2-b]thiophene Comonomer on Alignment and Charge Transport journal March 2018
Polymer Light Emitting Diodes with Doublet Emission journal June 2020
Polymer Structure Prediction from First Principles journal July 2020
Elucidating the Effect of Interfacial Interactions on Crystal Orientations in Thin Films of Polythiophenes journal June 2021
Direct Imide Formation from Thiophene Dicarboxylic Acids Gives Expanded Side-Chain Selection in Thienopyrrolediones journal February 2017
Diketopyrrolopyrrole-Based Chlorinated Bithiophene Polymers for Organic Solar Cells: Effect of Thiophene or Pyridine Flank journal April 2022
High-Performance All-Polymer Solar Cells with a High Fill Factor and a Broad Tolerance to the Donor/Acceptor Ratio journal October 2018
Chain Alignment and Charge Transport Anisotropy in Blade-Coated P(NDI2OD-T2)/PS Blend Films journal July 2022
Understanding Comparable Charge Transport Between Edge-on and Face-on Polymers in a Thiazolothiazole Polymer System journal April 2019
Third Crystalline Form of P(NDI2OD-T2) with Pronounced End-on Texture journal January 2023
The Spectral Signatures of Frenkel Polarons in H- and J-Aggregates journal March 2010
Significant Improvement of Unipolar n-Type Transistor Performances by Manipulating the Coplanar Backbone Conformation of Electron-Deficient Polymers via Hydrogen Bonding journal January 2019
Quantification of Thin Film Crystallographic Orientation Using X-ray Diffraction with an Area Detector journal June 2010
Mediating Solar Cell Performance by Controlling the Internal Dipole Change in Organic Photovoltaic Polymers journal July 2012
High-efficiency and air-stable P3HT-based polymer solar cells with a new non-fullerene acceptor journal June 2016
Regioregular narrow-bandgap-conjugated polymers for plastic electronics journal March 2017
Critical assessment of charge mobility extraction in FETs journal December 2017
Stabilizing copper sites in coordination polymers toward efficient electrochemical C-C coupling journal January 2023
Vertical organic electrochemical transistors for complementary circuits journal January 2023
Highly coplanar bis(thiazol-2-yl)-diketopyrrolopyrrole based donor–acceptor copolymers for ambipolar field effect transistors journal January 2016
Photocatalytic oxygen evolution from low-bandgap conjugated microporous polymer nanosheets: a combined first-principles calculation and experimental study journal January 2017
Fluorination in thieno[3,4-c]pyrrole-4,6-dione copolymers leading to electron transport, high crystallinity and end-on alignment journal January 2017
Oligo(ethylene glycol) side chain effect on the physical properties and molecular arrangement of oligothiophene–isoindigo based conjugated polymers journal January 2019
Understanding, quantifying, and controlling the molecular ordering of semiconducting polymers: from novices to experts and amorphous to perfect crystals journal January 2022
NEXAFS spectra of model sulfide chains: implications for sulfur networks obtained from inverse vulcanization journal January 2023
Synthesis of electrically conducting organic polymers: halogen derivatives of polyacetylene, (CH) x journal January 1977
Copper-catalyzed oxidation of arene-fused cyclic amines to cyclic imides journal January 2013
The Current Performance of the Wide Range (90–2500 eV) Soft X-ray Beamline at the Australian Synchrotron
  • Cowie, B. C. C.; Tadich, A.; Thomsen, L.
  • SRI 2009, 10TH INTERNATIONAL CONFERENCE ON RADIATION INSTRUMENTATION, AIP Conference Proceedings https://doi.org/10.1063/1.3463197
conference January 2010
Direct observation of prefreezing at the interface melt–solid in polymer crystallization journal November 2014
Generalized Gradient Approximation Made Simple journal October 1996
A low-background-intensity focusing small-angle X-ray scattering undulator beamline journal November 2013
2,5-Dihexyl-3,6-diphenylpyrrolo[3,4-c]pyrrole-1,4(2H,5H)-dione journal June 2010
Quick AS NEXAFS Tool ( QANT ): a program for NEXAFS loading and analysis developed at the Australian Synchrotron journal January 2016
High Triplet Energy Host Materials for Blue TADF OLEDs—A Tool Box Approach journal July 2020
Diketopyrrolopyrrole (DPP)-Based Materials and Its Applications: A Review journal September 2020