Thermally accelerated curing of platinum-catalyzed elastomers

Yap, Te Faye; Rajappan, Anoop; Bell, Marquise D.; Rasheed, Rawand M.; Decker, Colter J.; Preston, Daniel J.

doi:10.1016/j.xcrp.2024.101849

Title: Thermally accelerated curing of platinum-catalyzed elastomers

Journal Article · 29 February 2024 · Cell Reports Physical Science

DOI: https://doi.org/10.1016/j.xcrp.2024.101849 · OSTI ID:2318743

Yap, Te Faye; Rajappan, Anoop; Bell, Marquise D.; Rasheed, Rawand M.; Decker, Colter J.;

Not Available

View Journal Article

Cite

Export

Save

Sponsoring Organization:: USDOE

OSTI ID:: 2318743

Journal Information:: Cell Reports Physical Science, Journal Name: Cell Reports Physical Science Journal Issue: 3 Vol. 5; ISSN 2666-3864

Publisher:: ElsevierCopyright Statement

Country of Publication:: United States

Language:: English

References (51)

Importance of Mullins effect in commercial silicone elastomer formulations for soft robotics Krpovic, Sara; Dam‐Johansen, Kim; Skov, Anne Ladegaard Journal of Applied Polymer Science, Vol. 138, Issue 19 https://doi.org/10.1002/app.50380	journal	December 2020
The kinetic behavior of Liquid Silicone Rubber: A comparison between thermal and rheological approaches based on gel point determination Harkous, Ali; Colomines, Gaël; Leroy, Eric Reactive and Functional Polymers, Vol. 101 https://doi.org/10.1016/j.reactfunctpolym.2016.01.020	journal	April 2016
Soft Robotics Whitesides, George M. Angewandte Chemie International Edition, Vol. 57, Issue 16 https://doi.org/10.1002/anie.201800907	journal	March 2018
Observation of an Isokinetic Temperature and Compensation Effect for High-Temperature Crude Oil Fouling Bennett, Christopher A.; Kistler, R. Stanley; Nangia, Krish Heat Transfer Engineering, Vol. 30, Issue 10-11 https://doi.org/10.1080/01457630902751478	journal	October 2009
Thermodynamic Interpretation of the Meyer-Neldel Rule Explains Temperature Dependence of Ion Diffusion in Silicate Glass Takamure, N.; Sun, X.; Nagata, T. Physical Review Letters, Vol. 129, Issue 17 https://doi.org/10.1103/PhysRevLett.129.175901	journal	October 2022
Embedded 3D Printing of Thermally‐Cured Thermoset Elastomers and the Interdependence of Rheology and Machine Pathing Stang, Maria; Tashman, Joshua; Shiwarski, Daniel Advanced Materials Technologies, Vol. 8, Issue 3 https://doi.org/10.1002/admt.202200984	journal	October 2022
Efficacy and self-similarity of SARS-CoV-2 thermal decontamination Yap, Te Faye; Hsu, Jason C.; Liu, Zhen Journal of Hazardous Materials, Vol. 429 https://doi.org/10.1016/j.jhazmat.2021.127709	journal	May 2022
Mapping the mechanical and electrical properties of commercial silicone elastomer formulations for stretchable transducers Vaicekauskaite, Justina; Mazurek, Piotr; Vudayagiri, Sindhu Journal of Materials Chemistry C, Vol. 8, Issue 4 https://doi.org/10.1039/C9TC05072H	journal	January 2020
Pneumatic soft robots take a step toward autonomy Rajappan, Anoop; Jumet, Barclay; Preston, Daniel J. Science Robotics, Vol. 6, Issue 51 https://doi.org/10.1126/scirobotics.abg6994	journal	February 2021
Direct Ink Writing of 3D Functional Materials Lewis, J. A. Advanced Functional Materials, Vol. 16, Issue 17 https://doi.org/10.1002/adfm.200600434	journal	November 2006
A dynamic electrically driven soft valve for control of soft hydraulic actuators Xu, Siyi; Chen, Yufeng; Hyun, Nak-seung P. Proceedings of the National Academy of Sciences, Vol. 118, Issue 34 https://doi.org/10.1073/pnas.2103198118	journal	August 2021
3D Printing of High Viscosity Reinforced Silicone Elastomers Rodriguez, Nicholas; Ruelas, Samantha; Forien, Jean-Baptiste Polymers, Vol. 13, Issue 14 https://doi.org/10.3390/polym13142239	journal	July 2021
3D Direct Printing of Silicone Meniscus Implant Using a Novel Heat-Cured Extrusion-Based Printer Luis, Eric; Pan, Houwen Matthew; Sing, Swee Leong Polymers, Vol. 12, Issue 5 https://doi.org/10.3390/polym12051031	journal	May 2020
A Soft Robotic Sleeve for Safer Colonoscopy Procedures McCandless, Max; Gerald, Arincheyan; Carroll, Ashlyn IEEE Robotics and Automation Letters, Vol. 6, Issue 3 https://doi.org/10.1109/LRA.2021.3073651	journal	July 2021
Rotational multimaterial printing of filaments with subvoxel control Larson, Natalie M.; Mueller, Jochen; Chortos, Alex Nature, Vol. 613, Issue 7945 https://doi.org/10.1038/s41586-022-05490-7	journal	January 2023
Failure behaviour of silicone adhesive in bonded connections with simple geometry Staudt, Yves; Odenbreit, Christoph; Schneider, Jens International Journal of Adhesion and Adhesives, Vol. 82 https://doi.org/10.1016/j.ijadhadh.2017.12.015	journal	April 2018
Influence of specimen dimensions and strain measurement methods on tensile stress–strain curves Zhao, Y. H.; Guo, Y. Z.; Wei, Q. Materials Science and Engineering: A, Vol. 525, Issue 1-2 https://doi.org/10.1016/j.msea.2009.06.031	journal	November 2009
Combined roles of temperature and humidity on cure of a silicone elastomer Elsmore, Matthew T.; De Focatiis, Davide S. A. Polymer Testing, Vol. 93 https://doi.org/10.1016/j.polymertesting.2020.106967	journal	January 2021
Viscoelastic Properties of an Epoxy Resin during Cure O'Brien, Daniel J.; Mather, Patrick T.; White, Scott R. Journal of Composite Materials, Vol. 35, Issue 10 https://doi.org/10.1177/a037323	journal	May 2001
Current Perspectives on Silicone Rubber Technology Polmanteer, K. E. Rubber Chemistry and Technology, Vol. 54, Issue 5 https://doi.org/10.5254/1.3535846	journal	November 1981
A soft, bistable valve for autonomous control of soft actuators Rothemund, Philipp; Ainla, Alar; Belding, Lee Science Robotics, Vol. 3, Issue 16 https://doi.org/10.1126/scirobotics.aar7986	journal	March 2018
The meyer-neldel rule in semiconductors Metselaar, R.; Oversluizen, G. Journal of Solid State Chemistry, Vol. 55, Issue 3 https://doi.org/10.1016/0022-4596(84)90284-6	journal	December 1984
Kinetic and mechanistic considerations in the gelation of genipin-crosslinked gelatin Nickerson, M. T.; Patel, J.; Heyd, D. V. International Journal of Biological Macromolecules, Vol. 39, Issue 4-5 https://doi.org/10.1016/j.ijbiomac.2006.04.010	journal	November 2006
Nonplanar 3D Printing of Epoxy Using Freeform Reversible Embedding Arun, Neeha Dev; Yang, Humphrey; Yao, Lining Advanced Materials Technologies, Vol. 8, Issue 7 https://doi.org/10.1002/admt.202201542	journal	January 2023
Inkjet Printing of Complex Soft Machines with Densely Integrated Electrostatic Actuators Schlatter, Samuel; Grasso, Giulio; Rosset, Samuel Advanced Intelligent Systems, Vol. 2, Issue 11 https://doi.org/10.1002/aisy.202000136	journal	September 2020
Polydimethylsiloxane crosslinking kinetics: A systematic study on Sylgard184 comparing rheological and thermal approaches Bardelli, Tiziana; Marano, Claudia; Briatico Vangosa, Francesco Journal of Applied Polymer Science, Vol. 138, Issue 39 https://doi.org/10.1002/app.51013	journal	May 2021
Fabricating 3D Structures by Combining 2D Printing and Relaxation of Strain Cafferty, Brian J.; Campbell, Victoria E.; Rothemund, Philipp Advanced Materials Technologies, Vol. 4, Issue 1 https://doi.org/10.1002/admt.201800299	journal	August 2018
Rheological Behavior and Gel-Point Determination for a Model Lewis Acid-Initiated Chain Growth Epoxy Resin Mortimer, S.; Ryan, A. J.; Stanford, J. L. Macromolecules, Vol. 34, Issue 9, p. 2973-2980 https://doi.org/10.1021/ma001835x	journal	March 2001
Stretchable Microfluidic Radiofrequency Antennas Kubo, Masahiro; Li, Xiaofeng; Kim, Choongik Advanced Materials, Vol. 22, Issue 25, p. 2749-2752 https://doi.org/10.1002/adma.200904201	journal	April 2010
Perspective for soft robotics: the field’s past and future Tauber, Falk; Desmulliez, Marc; Piccin, Olivier Bioinspiration & Biomimetics, Vol. 18, Issue 3 https://doi.org/10.1088/1748-3190/acbb48	journal	March 2023
A HAPPI solution: Photothermal additive manufacturing of unmodified thermoset resins Yee, Daryl W. Matter, Vol. 6, Issue 8 https://doi.org/10.1016/j.matt.2023.07.002	journal	August 2023
Hybrid Soft–Rigid Actuators for Minimally Invasive Surgery Paternò, Linda; Tortora, Giuseppe; Menciassi, Arianna Soft Robotics, Vol. 5, Issue 6 https://doi.org/10.1089/soro.2017.0140	journal	December 2018
Tensile Creep Failure of Isotactic Polypropylene under the Strain Criterion Liu, Peiru; Peng, Li; Chen, Jiajie Macromolecules, Vol. 55, Issue 21 https://doi.org/10.1021/acs.macromol.2c01263	journal	October 2022
Electronics-free pneumatic circuits for controlling soft-legged robots Drotman, Dylan; Jadhav, Saurabh; Sharp, David Science Robotics, Vol. 6, Issue 51 https://doi.org/10.1126/scirobotics.aay2627	journal	February 2021
Soft Robotics for Chemists Ilievski, Filip; Mazzeo, Aaron D.; Shepherd, Robert F. Angewandte Chemie International Edition, Vol. 50, Issue 8 https://doi.org/10.1002/anie.201006464	journal	January 2011
Time- and temperature-dependent crosslinking behaviour of a silicone resin Wolff, Friedrich; Kugler, Christoph; Münstedt, Helmut Rheologica Acta, Vol. 51, Issue 1 https://doi.org/10.1007/s00397-011-0585-7	journal	August 2011
Fluid-Mediated Fabrication of Complex Assemblies Brun, Pierre-Thomas JACS Au, Vol. 2, Issue 11 https://doi.org/10.1021/jacsau.2c00427	journal	October 2022
Reaction kinetics and gel properties of blocked diisocyinate crosslinked chitosan hydrogels Lin-Gibson, Sheng; Walls, Howard J.; Kennedy, Scott B. Carbohydrate Polymers, Vol. 54, Issue 2 https://doi.org/10.1016/S0144-8617(03)00159-0	journal	November 2003
Multigait soft robot Shepherd, R. F.; Ilievski, F.; Choi, W. Proceedings of the National Academy of Sciences, Vol. 108, Issue 51 https://doi.org/10.1073/pnas.1116564108	journal	November 2011
Relationship between viscoelastic properties and gelation in thermosetting systems Tung, Chiang‐Ying M.; Dynes, Paul J. Journal of Applied Polymer Science, Vol. 27, Issue 2 https://doi.org/10.1002/app.1982.070270220	journal	February 1982
Liquid-Infused Silicone As a Biofouling-Free Medical Material MacCallum, Noah; Howell, Caitlin; Kim, Philseok ACS Biomaterials Science & Engineering, Vol. 1, Issue 1 https://doi.org/10.1021/ab5000578	journal	December 2014
Digital logic for soft devices Preston, Daniel J.; Rothemund, Philipp; Jiang, Haihui Joy Proceedings of the National Academy of Sciences, Vol. 116, Issue 16 https://doi.org/10.1073/pnas.1820672116	journal	March 2019
Toward a Common Framework and Database of Materials for Soft Robotics Marechal, Luc; Balland, Pascale; Lindenroth, Lukas Soft Robotics, Vol. 8, Issue 3 https://doi.org/10.1089/soro.2019.0115	journal	June 2021
Bubble casting soft robotics Jones, Trevor J.; Jambon-Puillet, Etienne; Marthelot, Joel Nature, Vol. 599, Issue 7884 https://doi.org/10.1038/s41586-021-04029-6	journal	November 2021
Skin-inspired hydrogel–elastomer hybrids with robust interfaces and functional microstructures Yuk, Hyunwoo; Zhang, Teng; Parada, German Alberto Nature Communications, Vol. 7, Issue 1 https://doi.org/10.1038/ncomms12028	journal	June 2016
A predictive model of the temperature-dependent inactivation of coronaviruses Yap, Te Faye; Liu, Zhen; Shveda, Rachel A. Applied Physics Letters, Vol. 117, Issue 6 https://doi.org/10.1063/5.0020782	journal	August 2020
Additive Manufacturing by Heating at a Patterned Photothermal Interface Lee, Chang-Uk; Chin, Kyle C. H.; Boydston, Andrew J. ACS Applied Materials & Interfaces, Vol. 15, Issue 12 https://doi.org/10.1021/acsami.3c00365	journal	March 2023
Lessons from Animals and Plants: The Symbiosis of Morphological Computation and Soft Robotics Laschi, C.; Mazzolai, B. IEEE Robotics & Automation Magazine, Vol. 23, Issue 3 https://doi.org/10.1109/MRA.2016.2582726	journal	September 2016
Silicones for Stretchable and Durable Soft Devices: Beyond Sylgard-184 Park, Sungjune; Mondal, Kunal; Treadway, Robert M. ACS Applied Materials & Interfaces, Vol. 10, Issue 13 https://doi.org/10.1021/acsami.7b18394	journal	March 2018
Inkjet 3D printing of UV and thermal cure silicone elastomers for dielectric elastomer actuators McCoul, David; Rosset, Samuel; Schlatter, Samuel Smart Materials and Structures, Vol. 26, Issue 12 https://doi.org/10.1088/1361-665X/aa9695	journal	November 2017
Spreading of fast-curing, thermosetting silicones Xie, Jingjin; Randolph, Robert; Simmons, Gary Applied Physics Letters, Vol. 115, Issue 25 https://doi.org/10.1063/1.5106388	journal	December 2019

Similar Records

Acceleration of rate of cure in boron trifluoride amine catalyzed cure of epoxy resins

Patent · 1987 · OSTI ID:5889852

Goel, A B

Chemical Origins of Permanent Set in a Peroxide Cured Filled Silicone Elastomer - Tensile and 1H NMR Analysis

Journal Article · 2004 · Polymer Degradation and Stability · OSTI ID:875962

Chinn, S; Deteresa, S; Shields, A; +3 more

Post-Cure Studies on Solid Silicone Elastomer: DC745U

Technical Report · 2014 · OSTI ID:1115547

Ortiz-Acosta, Denisse; Janicke, Michael T.; Yoder, Jacob; +1 more

Title: Thermally accelerated curing of platinum-catalyzed elastomers

Citation Formats

References (51)

Similar Records

Related Subjects