Design and techno economic optimization of an additively manufactured compact heat exchanger for high temperature and high pressure applications

Das, Sreedev; Rasouli, Erfan; Ziev, Tracey; Lamprinakos, Nicholas; Seo, Junwon; Rollett, Anthony; Vaishnav, Parth; Narayanan, Vinod

doi:10.1016/j.applthermaleng.2024.122778

Title: Design and techno economic optimization of an additively manufactured compact heat exchanger for high temperature and high pressure applications

Journal Article · 30 April 2024 · Applied Thermal Engineering

DOI: https://doi.org/10.1016/j.applthermaleng.2024.122778 · OSTI ID:2310401

Das, Sreedev; Rasouli, Erfan; Ziev, Tracey; Lamprinakos, Nicholas; Seo, Junwon; Rollett, Anthony; Vaishnav, Parth; Narayanan, Vinod

Not Available

View Journal Article

Cite

Export

Save

Research Organization:: Carnegie Mellon Univ., Pittsburgh, PA (United States)

Sponsoring Organization:: USDOE Advanced Research Projects Agency - Energy (ARPA-E)

Grant/Contract Number:: AR0001127

OSTI ID:: 2310401

Journal Information:: Applied Thermal Engineering, Journal Name: Applied Thermal Engineering Journal Issue: C Vol. 245; ISSN 1359-4311

Publisher:: ElsevierCopyright Statement

Country of Publication:: United Kingdom

Language:: English

References (36)

Process cost modeling: Strategic engineering and economic evaluation of materials technologies Field, Frank; Kirchain, Randolph; Roth, Richard JOM, Vol. 59, Issue 10 https://doi.org/10.1007/s11837-007-0126-0	journal	October 2007
Flow distribution in parallel and reverse flow manifolds Datta, A. B.; Majumdar, A. K. International Journal of Heat and Fluid Flow, Vol. 2, Issue 4 https://doi.org/10.1016/0142-727X(80)90019-3	journal	December 1980
Optimal fin geometry based on exergoeconomic analysis for a pin-fin array with application to electronics cooling Shuja, S. Z. Exergy, An International Journal, Vol. 2, Issue 4 https://doi.org/10.1016/S1164-0235(02)00081-X	journal	January 2002
Structural assessment of intermediate printed circuit heat exchanger for sodium-cooled fast reactor with supercritical CO2 cycle Lee, Youho; Lee, Jeong Ik Annals of Nuclear Energy, Vol. 73 https://doi.org/10.1016/j.anucene.2014.06.022	journal	November 2014
Design and dynamic modeling of printed circuit heat exchangers for supercritical carbon dioxide Brayton power cycles Jiang, Yuan; Liese, Eric; Zitney, Stephen E. Applied Energy, Vol. 231 https://doi.org/10.1016/j.apenergy.2018.09.193	journal	December 2018
Multi-objective optimization of a double-faced type printed circuit heat exchanger Lee, Sang-Moon; Kim, Kwang-Yong; Kim, Soon-Wook Applied Thermal Engineering, Vol. 60, Issue 1-2 https://doi.org/10.1016/j.applthermaleng.2013.06.039	journal	October 2013
Thermal-hydraulic characteristics and performance of 3D wavy channel based printed circuit heat exchanger Khan, Hamid Hassan; M., Aneesh A.; Sharma, Atul Applied Thermal Engineering, Vol. 87 https://doi.org/10.1016/j.applthermaleng.2015.04.077	journal	August 2015
Pressure drop and heat transfer characteristics of a high-temperature printed circuit heat exchanger Chen, Minghui; Sun, Xiaodong; Christensen, Richard N. Applied Thermal Engineering, Vol. 108 https://doi.org/10.1016/j.applthermaleng.2016.07.149	journal	September 2016
Study on hydraulic and thermal performance of printed circuit heat transfer surface with distributed airfoil fins Chu, Wen-xiao; Li, Xiong-hui; Ma, Ting Applied Thermal Engineering, Vol. 114 https://doi.org/10.1016/j.applthermaleng.2016.11.187	journal	March 2017
An additively manufactured metallic manifold-microchannel heat exchanger for high temperature applications Zhang, Xiang; Tiwari, Ratnesh; Shooshtari, Amir H. Applied Thermal Engineering, Vol. 143 https://doi.org/10.1016/j.applthermaleng.2018.08.032	journal	October 2018
Review of common failures in heat exchangers – Part I: Mechanical and elevated temperature failures Ali, Murad; Ul-Hamid, Anwar; Alhems, Luai M. Engineering Failure Analysis, Vol. 109 https://doi.org/10.1016/j.engfailanal.2020.104396	journal	January 2020
Heat transfer and pressure drop correlations of microchannel heat exchangers with S-shaped and zigzag fins for carbon dioxide cycles Ngo, Tri Lam; Kato, Yasuyoshi; Nikitin, Konstantin Experimental Thermal and Fluid Science, Vol. 32, Issue 2 https://doi.org/10.1016/j.expthermflusci.2007.06.006	journal	November 2007
Experimental investigation on SCO2-water heat transfer characteristics in a printed circuit heat exchanger with straight channels Chu, Wen-xiao; Li, Xiong-hui; Ma, Ting International Journal of Heat and Mass Transfer, Vol. 113 https://doi.org/10.1016/j.ijheatmasstransfer.2017.05.059	journal	October 2017
Pitch and aspect ratio effects on single-phase heat transfer through microscale pin fin heat sinks Rasouli, Erfan; Naderi, Cameron; Narayanan, Vinod International Journal of Heat and Mass Transfer, Vol. 118 https://doi.org/10.1016/j.ijheatmasstransfer.2017.10.105	journal	March 2018
Heat Transfer Enhancement of Single-Phase Internal Flows using Shape Optimization and Additively Manufactured Flow Structures Moon, Hyunkyu; Boyina, Kalyan; Miljkovic, Nenad International Journal of Heat and Mass Transfer, Vol. 177 https://doi.org/10.1016/j.ijheatmasstransfer.2021.121510	journal	October 2021
Printed circuit heat exchanger thermal–hydraulic performance in supercritical CO2 experimental loop Nikitin, Konstantin; Kato, Yasuyoshi; Ngo, Lam International Journal of Refrigeration, Vol. 29, Issue 5 https://doi.org/10.1016/j.ijrefrig.2005.11.005	journal	August 2006
Assessment of the design effects on the structural performance of the Printed Circuit Heat Exchanger under very high temperature condition de la Torre, Raciel; François, Juan-Luis; Lin, Cheng-Xian Nuclear Engineering and Design, Vol. 365 https://doi.org/10.1016/j.nucengdes.2020.110713	journal	August 2020
Numerical study on thermal hydraulic performance of a Printed Circuit Heat Exchanger Figley, Justin; Sun, Xiaodong; Mylavarapu, Sai K. Progress in Nuclear Energy, Vol. 68 https://doi.org/10.1016/j.pnucene.2013.05.003	journal	September 2013
Development of Nickel Alloys Based on Alloy 617 for Components in 700 °C Power Plants Klöwer, J.; Husemann, R. U.; Bader, M. Procedia Engineering, Vol. 55 https://doi.org/10.1016/j.proeng.2013.03.247	journal	January 2013
An additively-manufactured molten salt-to-supercritical carbon di-oxide primary heat exchanger for solar thermal power generation – Design and techno-economic performance Tano, Ines-Noelly; Rasouli, Erfan; Ziev, Tracey Solar Energy, Vol. 234 https://doi.org/10.1016/j.solener.2022.01.056	journal	March 2022
A review of printed circuit heat exchangers for helium and supercritical CO2 Brayton cycles Chai, Lei; Tassou, Savvas A. Thermal Science and Engineering Progress, Vol. 18 https://doi.org/10.1016/j.tsep.2020.100543	journal	August 2020
Ceramic–metal composites for heat exchangers in concentrated solar power plants Caccia, M.; Tabandeh-Khorshid, M.; Itskos, G. Nature, Vol. 562, Issue 7727 https://doi.org/10.1038/s41586-018-0593-1	journal	October 2018
Cost of Using Laser Powder Bed Fusion to Fabricate a Molten Salt-to-Supercritial Carbon Dioxide Heat Exchanger for Concentrating Solar Power Ziev, Tracey; Rasouli, Erfan; Tano, Ines-Noelly 3D Printing and Additive Manufacturing https://doi.org/10.1089/3dp.2022.0188	journal	March 2023
Design of a Microchannel Heat Exchanger for Extreme Environments (MHXEE) Yao, Zhengda; Mandel, Raphael K.; Shooshtari, Amir 2022 21st IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (iTherm) https://doi.org/10.1109/iTherm54085.2022.9899621	conference	May 2022
Nusselt Number and Friction Factor of Staggered Arrays of Low Aspect Ratio Micropin-Fins Under Cross Flow for Water as Fluid Prasher, Ravi S.; Dirner, John; Chang, Je-Young Journal of Heat Transfer, Vol. 129, Issue 2 https://doi.org/10.1115/1.2402179	journal	April 2006
Investigation of High-Temperature Printed Circuit Heat Exchangers for Very High Temperature Reactors Mylavarapu, Sai; Sun, Xiaodong; Figley, Justin Journal of Engineering for Gas Turbines and Power, Vol. 131, Issue 6 https://doi.org/10.1115/1.3098425	journal	July 2009
Flow Distribution Manifolds Bajura, R. A.; Jones, E. H. Journal of Fluids Engineering, Vol. 98, Issue 4 https://doi.org/10.1115/1.3448441	journal	December 1976
Air-Side Heat Transfer Enhancement Utilizing Design Optimization and an Additive Manufacturing Technique Arie, Martinus A.; Shooshtari, Amir H.; Rao, Veena V. Journal of Heat Transfer, Vol. 139, Issue 3 https://doi.org/10.1115/1.4035068	journal	December 2016
Metal Additive Manufacturing: Cost Competitive Beyond Low Volumes Laureijs, Rianne E.; Roca, Jaime Bonnín; Narra, Sneha Prabha Journal of Manufacturing Science and Engineering, Vol. 139, Issue 8 https://doi.org/10.1115/1.4035420	journal	May 2017
Design of an Additively Manufactured Recuperator With 800 °C Inlet Temperature for sCO2 Power Cycle Application Marshall, Michael; Akbari, Meysam; Zhao, Ji-Cheng Journal of Engineering for Gas Turbines and Power, Vol. 145, Issue 2 https://doi.org/10.1115/1.4055723	journal	November 2022
Mechanical Design and Validation Testing for a High-Performance Supercritical Carbon Dioxide Heat Exchanger Sullivan, Shaun D.; Farias, Jason; Kesseli, James ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, Volume 9: Oil and Gas Applications; Supercritical CO2 Power Cycles; Wind Energy https://doi.org/10.1115/GT2017-63639	conference	August 2017
Finite Element Analysis of Printed Circuit Heat Exchanger Core for High Temperature Creep and Burst Responses Mahajan, Heramb P.; Devi, Urmi; Hassan, Tasnim Volume 3B: Design and Analysis https://doi.org/10.1115/PVP2018-84748	conference	July 2018
Low-Cost Recuperative Heat Exchanger for Supercritical Carbon Dioxide Power Systems (Final Scientific/Technical Report) Kelly, John T. https://doi.org/10.2172/1572699	report	October 2019
Statsmodels: Econometric and Statistical Modeling with Python Seabold, Skipper; Perktold, Josef Proceedings of the Python in Science Conference https://doi.org/10.25080/Majora-92bf1922-011	conference	January 2010
Experimental Characterization of an Additively Manufactured Inconel 718 Heat Exchanger for High-Temperature Applications Battaglia, Fabio; Arie, Martinus; Zhang, Xiang Energies, Vol. 16, Issue 10 https://doi.org/10.3390/en16104156	journal	May 2023
Costs and Cost Effectiveness of Additive Manufacturing Thomas, Douglas S.; Gilbert, Stanley W. National Institute of Standards and Technology https://doi.org/10.6028/NIST.SP.1176	report	December 2014

Similar Records

Experimental characterization of an additively manufactured heat exchanger for high temperature and pressure applications

Journal Article · 2025 · Applied Thermal Engineering · OSTI ID:2499578

Rasouli, Erfan; Tano, Ines-Noelly; Aboud, Aref; +4 more

Advances in high-pressure and high-temperature heat exchangers: Innovations via additive manufacturing and their applications

Journal Article · 2025 · Thermal Science and Engineering Progress · OSTI ID:2572165

Pacheco da Silva, Ramon Peruchi; Muneeshwaran, Muneeshwaran; Krishnan, Easwaran N.; +3 more

Additive manufacturing and testing of a ceramic heat exchanger for high-temperature and high-pressure applications for concentrating solar power

Journal Article · 2022 · Solar Energy · OSTI ID:1877917

Du, Wenchao; Yu, Wenhua; France, David M.; +2 more

Related Subjects

Energy & Fuels
Engineering
Mechanics
Thermodynamics

Title: Design and techno economic optimization of an additively manufactured compact heat exchanger for high temperature and high pressure applications

Citation Formats

References (36)

Similar Records

Related Subjects