Effect of molybdenum on the oxidation resistance of FeCrAl alloy in lower temperature (400 °C) and higher temperature (1200 °C) steam environments

Qu, Haozheng J.; Chikhalikar, Atharva S.; Abouelella, Hamdy; Roy, Indranil; Rajendran, Rupesh; Nagothi, Bhavani S.; Umretiya, Rajnikant; Hoffman, Andrew K.; Rebak, Raul B.

doi:10.1016/j.corsci.2024.111870

Title: Effect of molybdenum on the oxidation resistance of FeCrAl alloy in lower temperature (400 °C) and higher temperature (1200 °C) steam environments

Journal Article · 31 March 2024 · Corrosion Science

DOI: https://doi.org/10.1016/j.corsci.2024.111870 · OSTI ID:2283607

Qu, Haozheng J.; Chikhalikar, Atharva S.; Abouelella, Hamdy; Roy, Indranil;

; Nagothi, Bhavani S.;

; Hoffman, Andrew K.; Rebak, Raul B.

Not Available

View Accepted Manuscript (Publisher)

Cite

Export

Save

Sponsoring Organization:: USDOE

Grant/Contract Number:: NE0009047

OSTI ID:: 2283607

Journal Information:: Corrosion Science, Journal Name: Corrosion Science Journal Issue: C Vol. 229; ISSN 0010-938X

Publisher:: ElsevierCopyright Statement

Country of Publication:: United Kingdom

Language:: English

References (47)

Effect of Al Concentration on Fe-17cr Alloy During Steam Oxidation at 400° C Roy, Indranil; Abouelella, Hamdy; Rajendran, Rupesh SSRN Electronic Journal https://doi.org/10.2139/ssrn.4233192	journal	September 2022
Intermediate temperature corrosion behaviour of Fe-12Cr-6Al-2Mo-0.2Si-0.03Y alloy (C26M) at 300–600 °C Li, Nan; Parker, Stephen S.; Saleh, Tarik A. Corrosion Science, Vol. 157 https://doi.org/10.1016/j.corsci.2019.05.029	journal	August 2019
Effect of aluminum on the FeCr(Al) alloy oxidation resistance in steam environment at low temperature (400 °C) and high temperature (1200 °C) Chikhalikar, Atharva; Roy, Indranil; Abouelella, Hamdy Corrosion Science, Vol. 209 https://doi.org/10.1016/j.corsci.2022.110765	journal	December 2022
Effect of molybdenum additions on the microstructures and corrosion behaviours of 316L stainless steel-based alloys Rahman, T.; Ebert, W. L.; Indacochea, J. E. Corrosion Engineering, Science and Technology, Vol. 53, Issue 3 https://doi.org/10.1080/1478422X.2018.1443991	journal	February 2018
Evaluation of Laves-phase forming Fe–Cr alloy for SOFC interconnects in reducing atmosphere Horita, Teruhisa; Kishimoto, Haruo; Yamaji, Katsuhiko Journal of Power Sources, Vol. 176, Issue 1 https://doi.org/10.1016/j.jpowsour.2007.10.041	journal	January 2008
Mechanical properties of neutron-irradiated model and commercial FeCrAl alloys Field, Kevin G.; Briggs, Samuel A.; Sridharan, Kumar Journal of Nuclear Materials, Vol. 489 https://doi.org/10.1016/j.jnucmat.2017.03.038	journal	June 2017
Effect of Mo and Mn additions on the corrosion behaviour of AISI 304 and 316 stainless steels in H2SO4 Pardo, A.; Merino, M. C.; Coy, A. E. Corrosion Science, Vol. 50, Issue 3 https://doi.org/10.1016/j.corsci.2007.11.004	journal	March 2008
Effects of Nb-doping on the mechanical properties and high-temperature steam oxidation of annealing FeCrAl fuel cladding alloys Chen, Guang; Wang, Hui; Sun, Hongying Materials Science and Engineering: A, Vol. 803 https://doi.org/10.1016/j.msea.2020.140500	journal	January 2021
Advanced Fuels Campaign Light Water Reactor Accident Tolerant Fuel Performance Metrics Executive Summary Bragg-Sitton, Shannon https://doi.org/10.2172/1122119	report	February 2014
Two-Dimensional Molybdenum Trioxide and Dichalcogenides Balendhran, Sivacarendran; Walia, Sumeet; Nili, Hussein Advanced Functional Materials, Vol. 23, Issue 32 https://doi.org/10.1002/adfm.201300125	journal	April 2013
Effect of Al concentration on Fe-17Cr alloy during steam oxidation at 400 °C Roy, Indranil; Abouelella, Hamdy; Rajendran, Rupesh Corrosion Science, Vol. 217 https://doi.org/10.1016/j.corsci.2023.111135	journal	June 2023
Microstructural understanding of general and localized corrosion of Fe13Cr4Al2Mo1.2Nb alloy in high temperature aerated water and superheated steam Lin, Xiaodong; Liang, Xue; Li, Yifeng Corrosion Science, Vol. 203 https://doi.org/10.1016/j.corsci.2022.110341	journal	July 2022
Influence of Mo content on the phase evolution and corrosion behavior of model Fe–9Cr–xMo (x = 5, 7, and 9 wt%) alloys Gomes da Silva, Marcelo J.; Herculano, Luis F. G.; Urcezino, Amanda S. C. Journal of Materials Research, Vol. 30, Issue 12 https://doi.org/10.1557/jmr.2015.157	journal	June 2015
Effect of aging and α’ segregation on oxidation and electrochemical behavior of FeCrAl alloys Rajendran, Rupesh; Chikhalikar, Atharva S.; Roy, Indranil Journal of Nuclear Materials, Vol. 588 https://doi.org/10.1016/j.jnucmat.2023.154751	journal	January 2024
New Insights on the Effects of Chemistry and Temperature on Α’ Precipitation During Aging of Fecral Alloys Hoffman, Andrew; Qu, Haozheng J.; Roy, Indranil SSRN https://doi.org/10.2139/ssrn.4628912	journal	November 2023
Advanced oxidation-resistant iron-based alloys for LWR fuel cladding Terrani, K. A.; Zinkle, S. J.; Snead, L. L. Journal of Nuclear Materials, Vol. 448, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2013.06.041	journal	May 2014
Steam solubilities of solid MoO3, ZnO and Cu2O, calculated on a basis of a thermodynamic model Akinfiev, N. N.; Plyasunov, A. V. Fluid Phase Equilibria, Vol. 338 https://doi.org/10.1016/j.fluid.2012.11.027	journal	January 2013
Zircaloy Fuel Cladding Behavior in a Loss-of-Coolant Accident: A Review Erbacher, F. J.; Leistikow, S. Zirconium in the Nuclear Industry https://doi.org/10.1520/STP28138S	book	January 1987
Processability evaluation of a Mo-containing FeCrAl alloy for seamless thin-wall tube fabrication Sun, Zhiqian; Yamamoto, Yukinori Materials Science and Engineering: A, Vol. 700 https://doi.org/10.1016/j.msea.2017.06.036	journal	July 2017
Raman studies of hexagonal MoO3 at high pressure Zhang, C. C.; Zheng, L.; Zhang, Z. M. physica status solidi (b), Vol. 248, Issue 5 https://doi.org/10.1002/pssb.201000633	journal	March 2011
Neutronic analysis of candidate accident-tolerant cladding concepts in pressurized water reactors George, Nathan Michael; Terrani, Kurt; Powers, Jeff Annals of Nuclear Energy, Vol. 75 https://doi.org/10.1016/j.anucene.2014.09.005	journal	January 2015
Oxide Morphology of a FeCrAl Alloy, Kanthal APMT, Following Extended Aging in Air at 300 °C to 600 °C Li, Nan; Parker, Stephen S.; Wood, Elizabeth S. Metallurgical and Materials Transactions A, Vol. 49, Issue 7 https://doi.org/10.1007/s11661-018-4649-5	journal	May 2018
Behavior of an improved Zr fuel cladding with oxidation resistant coating under loss-of-coolant accident conditions Park, Dong Jun; Kim, Hyun Gil; Jung, Yang Il Journal of Nuclear Materials, Vol. 482 https://doi.org/10.1016/j.jnucmat.2016.10.021	journal	December 2016
Iron-chrome-aluminum alloy cladding for increasing safety in nuclear power plants Rebak, Raul B. EPJ Nuclear Sciences & Technologies, Vol. 3 https://doi.org/10.1051/epjn/2017029	journal	January 2017
Improvement of thermal stability in the solar selective absorbing Mo–Al2O3 coating Cheng, Jiushan; Wang, Cong; Wang, Wenwen Solar Energy Materials and Solar Cells, Vol. 109 https://doi.org/10.1016/j.solmat.2012.11.010	journal	February 2013
Characterization of oxides formed on iron-chromium-aluminum alloy in simulated light water reactor environments Rebak, Raul B.; Larsen, Michael; Kim, Young-Jin Corrosion Reviews, Vol. 35, Issue 3 https://doi.org/10.1515/corrrev-2017-0011	journal	August 2017
An investigation of FeCrAl cladding behavior under normal operating and loss of coolant conditions Gamble, K. A.; Barani, T.; Pizzocri, D. Journal of Nuclear Materials, Vol. 491 https://doi.org/10.1016/j.jnucmat.2017.04.039	journal	August 2017
Effect of Ni–Mo addition on cyclic and isothermal oxidation resistance and electrical behavior of ferritic stainless steel for SOFCs interconnect Safikhani, Azim; Esmailian, Mohammad; Salmani, Mohammad Reza International Journal of Hydrogen Energy, Vol. 39, Issue 21 https://doi.org/10.1016/j.ijhydene.2014.05.122	journal	July 2014
Accident tolerant fuel cladding development: Promise, status, and challenges Terrani, Kurt A. Journal of Nuclear Materials, Vol. 501 https://doi.org/10.1016/j.jnucmat.2017.12.043	journal	April 2018
Material Selection for Accident Tolerant Fuel Cladding Pint, B. A.; Terrani, K. A.; Yamamoto, Y. Metallurgical and Materials Transactions E, Vol. 2, Issue 3 https://doi.org/10.1007/s40553-015-0056-7	journal	September 2015
Microstructure and high temperature mechanical properties of as-cast FeCrAl alloys He, Yang; Liu, Jianhua; Qiu, Shengtao Materials Science and Engineering: A, Vol. 726 https://doi.org/10.1016/j.msea.2018.04.039	journal	May 2018
Hydrogen-enhanced degradation and oxide effects in zirconium alloys for nuclear applications Zieliński, Andrzej; Sobieszczyk, Sylwia International Journal of Hydrogen Energy, Vol. 36, Issue 14 https://doi.org/10.1016/j.ijhydene.2011.04.002	journal	July 2011
FeCrAl fuel/clad chemical interaction in light water reactor environments Qu, Haozheng J.; Higgins, Maria; Abouelella, Hamdy Journal of Nuclear Materials, Vol. 587 https://doi.org/10.1016/j.jnucmat.2023.154717	journal	December 2023
Initial oxidation mechanism of FeCrAl thin films with Nb and Si additions Li, Sha; Yuan, Yuan; Zhou, Ruonan Thin Solid Films, Vol. 782 https://doi.org/10.1016/j.tsf.2023.140015	journal	October 2023
Versatile Oxide Films Protect FeCrAl Alloys Under Normal Operation and Accident Conditions in Light Water Power Reactors Rebak, Raul B. JOM, Vol. 70, Issue 2 https://doi.org/10.1007/s11837-017-2705-z	journal	December 2017
Exploring the high-temperature steam oxidation behaviors of the lean-Cr (7–10 wt%) FeCrAl alloys Chen, Guang; Yang, Hongyan; Sun, Hongying Corrosion Science, Vol. 194 https://doi.org/10.1016/j.corsci.2021.109927	journal	January 2022
Oxidation characteristics of Fe22Cr5Al3Mo-xNb alloys in high temperature steam Zhang, Wenhuai; Qian, Yue; Sun, Rongrong Corrosion Science, Vol. 191 https://doi.org/10.1016/j.corsci.2021.109722	journal	October 2021
Oxidation and Creep Limited Lifetime of Kanthal APMT®, a Dispersion Strengthened FeCrAlMo Alloy Designed for Strength and Oxidation Resistance at High Temperatures Jönsson, Bo; Lu, Qin; Chandrasekaran, Dilip Oxidation of Metals, Vol. 79, Issue 1-2 https://doi.org/10.1007/s11085-012-9324-4	journal	December 2012
High-Temperature Steam Oxidation Behavior of an Fecral Alloy with a Controlled Mo Addition Qi, Wen; Yang, Kun; Wang, Peng SSRN Electronic Journal https://doi.org/10.2139/ssrn.4125262	journal	June 2022
Effect of nickel on the oxidation behavior of FeCrAl alloy in simulated PWR and BWR conditions Qu, Haozheng J.; Abouelella, Hamdy; Chikhalikar, Atharva S. Corrosion Science, Vol. 216 https://doi.org/10.1016/j.corsci.2023.111093	journal	May 2023
Microstructure and mechanical properties of FeCrAl alloys under heavy ion irradiations Aydogan, E.; Weaver, J. S.; Maloy, S. A. Journal of Nuclear Materials, Vol. 503 https://doi.org/10.1016/j.jnucmat.2018.03.002	journal	May 2018
Effect of Al and Cr Content on Air and Steam Oxidation of FeCrAl Alloys and Commercial APMT Alloy Unocic, Kinga A.; Yamamoto, Yukinori; Pint, Bruce A. Oxidation of Metals, Vol. 87, Issue 3-4 https://doi.org/10.1007/s11085-017-9745-1	journal	March 2017
Oxidation behavior of FeCrAl coated Zry-4 under high temperature steam environment Han, Xiaochun; Wang, Yu; Peng, Shuming Corrosion Science, Vol. 149 https://doi.org/10.1016/j.corsci.2019.01.004	journal	April 2019
Mechanism of Al on FeCrAl steam oxidation behavior and molecular dynamics simulations Qiao, Yingjie; Wang, Peng; Qi, Wen Journal of Alloys and Compounds, Vol. 828 https://doi.org/10.1016/j.jallcom.2020.154310	journal	July 2020
Effect of molybdenum addition on oxidation behavior and secondary protection mechanism of FeCrAl coatings Zhou, Ruonan; Wang, Fangming; Xu, Kai Materials Characterization, Vol. 204 https://doi.org/10.1016/j.matchar.2023.113221	journal	October 2023
Effects of zirconium and oxygen on the oxidation of FeCrAl-ODS alloys under air and steam conditions up to 1500 °C Maeda, T.; Ukai, S.; Hayashi, S. Journal of Nuclear Materials, Vol. 516 https://doi.org/10.1016/j.jnucmat.2019.01.041	journal	April 2019
High temperature oxidation of molybdenum in water vapor environments Nelson, A. T.; Sooby, E. S.; Kim, Y. -J. Journal of Nuclear Materials, Vol. 448, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2013.10.043	journal	May 2014

Similar Records

Enhanced Mechanical Properties and Wear Resistance of FeCrAl Alloys at ~ 300°C and Higher Temperatures

Journal Article · 2024 · JOM. Journal of the Minerals, Metals & Materials Society · OSTI ID:2340208

Dolley, Evan J.; Zhang, Wanming; Zorn, Gilad; +2 more

Oxidation Resistance in 1200°C Steam of a FeCrAl Alloy Fabricated by Three Metallurgical Processes

Journal Article · 2022 · JOM. Journal of the Minerals, Metals & Materials Society · OSTI ID:1846465

Hoffman, Andrew K.; Umretiya, Rajnikant V.; Gupta, Vipul K.; +5 more

Oxidation Resistance in 1200°C Steam of a FeCrAl Alloy Fabricated by Three Metallurgical Processes

Journal Article · 2022 · JOM. Journal of the Minerals, Metals & Materials Society · OSTI ID:1976739

Hoffman, Andrew K.; Umretiya, Rajnikant V.; Gupta, Vipul K.; +5 more

Title: Effect of molybdenum on the oxidation resistance of FeCrAl alloy in lower temperature (400 °C) and higher temperature (1200 °C) steam environments

Citation Formats

References (47)

Similar Records

Related Subjects