Ultrasound and X-ray Cross-Characterization of a Graded Impedance Impactor used for Shock-Ramp Compression Experiments

Stobbe, David; Kelly, James; Rogers, Brian; Champley, Kyle; Townsend, Andrew; Tringe, Joseph

doi:10.1007/s11220-023-00444-3

Title: Ultrasound and X-ray Cross-Characterization of a Graded Impedance Impactor used for Shock-Ramp Compression Experiments

Journal Article · 29 October 2023 · Sensing and Imaging

DOI: https://doi.org/10.1007/s11220-023-00444-3 · OSTI ID:2204075

Stobbe, David; Kelly, James; Rogers, Brian; Champley, Kyle; Townsend, Andrew; Tringe, Joseph

Abstract In this work we perform ultrasound measurements on an impedance graded impactor made by tape casting magnesium, copper, and tungsten. We also destructively extract small representative samples from the part for complementary characterization with x-ray computed tomography. Combining the two data sets enables direct assignment of some of the measured ultrasound features to specific material characteristics identified by x-ray tomography. Our results demonstrate how ultrasound inspection, informed by x-ray computed tomography, can be used to identify sub-millimeter material amalgamations and spatial heterogeneities in this graded material.

View Journal Article

Cite

Export

Save

Sponsoring Organization:: USDOE

OSTI ID:: 2204075

Alternate ID(s):: OSTI ID: 2204950

Journal Information:: Sensing and Imaging, Journal Name: Sensing and Imaging Journal Issue: 1 Vol. 24; ISSN 1557-2072

Publisher:: Springer Science + Business MediaCopyright Statement

Country of Publication:: United States

Language:: English

References (20)

SLM lattice structures: Properties, performance, applications and challenges Maconachie, Tobias; Leary, Martin; Lozanovski, Bill Materials & Design, Vol. 183 https://doi.org/10.1016/j.matdes.2019.108137	journal	December 2019
Non-destructive testing application of radiography and ultrasound for wire and arc additive manufacturing Lopez, Ana; Bacelar, Ricardo; Pires, Inês Additive Manufacturing, Vol. 21 https://doi.org/10.1016/j.addma.2018.03.020	journal	May 2018
Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints Thompson, Mary Kathryn; Moroni, Giovanni; Vaneker, Tom CIRP Annals, Vol. 65, Issue 2 https://doi.org/10.1016/j.cirp.2016.05.004	journal	January 2016
Estimates of Ta strength at ultrahigh pressures and strain rates using thin-film graded-density impactors Brown, J. L.; Adams, D. P.; Alexander, C. S. Physical Review B, Vol. 99, Issue 21 https://doi.org/10.1103/PhysRevB.99.214105	journal	June 2019
Development of semiempirical equation of state of binary functionally graded materials and its influence on generation of ramp compression: Comparison with bilayer graded density impactors Ray, Aditi; Singla, Anuradha Physical Review B, Vol. 103, Issue 5 https://doi.org/10.1103/PhysRevB.103.054301	journal	February 2021
X-ray computed tomography for additive manufacturing: a review Thompson, A.; Maskery, I.; Leach, R. K. Measurement Science and Technology, Vol. 27, Issue 7 https://doi.org/10.1088/0957-0233/27/7/072001	journal	June 2016
Quantitative assessment of liquid Ga penetration into an aluminium alloy by high-resolution X-ray tomography Ohgaki, T.; Toda, H.; Sinclair, I. Materials Science and Engineering: A, Vol. 427, Issue 1-2 https://doi.org/10.1016/j.msea.2005.07.050	journal	July 2006
Directed energy deposition additive manufacturing of functionally graded Al-W composites Kelly, J. P.; Elmer, J. W.; Ryerson, F. J. Additive Manufacturing, Vol. 39 https://doi.org/10.1016/j.addma.2021.101845	journal	March 2021
X-Ray Microcomputed Tomography in Additive Manufacturing: A Review of the Current Technology and Applications du Plessis, Anton; Yadroitsev, Igor; Yadroitsava, Ina 3D Printing and Additive Manufacturing, Vol. 5, Issue 3 https://doi.org/10.1089/3dp.2018.0060	journal	September 2018
An overview of functionally graded additive manufacturing Loh, Giselle Hsiang; Pei, Eujin; Harrison, David Additive Manufacturing, Vol. 23 https://doi.org/10.1016/j.addma.2018.06.023	journal	October 2018
Application of Al-Cu-W-Ta graded density impactors in dynamic ramp compression experiments Kelly, James P.; Nguyen, Jeffrey H.; Lind, Jonathan Journal of Applied Physics, Vol. 125, Issue 14 https://doi.org/10.1063/1.5055398	journal	April 2019
An investigation on the suitability of modern nondestructive testing methods for the inspection of specimens manufactured by laser powder bed fusion Kolb, Cara G.; Zier, Katja; Grager, Jan-Carl SN Applied Sciences, Vol. 3, Issue 7 https://doi.org/10.1007/s42452-021-04685-3	journal	June 2021
The exponential edge-gradient effect in X-ray computed tomography Joseph, P. M.; Spital, R. D. Physics in Medicine and Biology, Vol. 26, Issue 3 https://doi.org/10.1088/0031-9155/26/3/010	journal	May 1981
Fabrication and characterization of graded impedance impactors for gas gun experiments from hot-pressed magnesium and polyethylene powders Krone, Ryan T.; Martin, L. Peter; Patterson, J. Reed Materials Science and Engineering: A, Vol. 479, Issue 1-2 https://doi.org/10.1016/j.msea.2007.06.056	journal	April 2008
Melting of iron at the physical conditions of the Earth's core Nguyen, Jeffrey H.; Holmes, Neil C. Nature, Vol. 427, Issue 6972 https://doi.org/10.1038/nature02248	journal	January 2004
Livermore tomography tools: Accurate, fast, and flexible software for tomographic science Champley, Kyle M.; Willey, Trevor M.; Kim, Hyojin NDT & E International, Vol. 126 https://doi.org/10.1016/j.ndteint.2021.102595	journal	March 2022
Fourier method for 3-dimensional data fusion of X-ray Computed Tomography and ultrasound Leach, William; Lum, Jordan; Champley, Kyle NDT & E International, Vol. 127 https://doi.org/10.1016/j.ndteint.2021.102600	journal	April 2022
Review of defects in lattice structures manufactured by powder bed fusion Echeta, Ifeanyichukwu; Feng, Xiaobing; Dutton, Ben The International Journal of Advanced Manufacturing Technology, Vol. 106, Issue 5-6 https://doi.org/10.1007/s00170-019-04753-4	journal	December 2019
Application of tape-cast graded impedance impactors for light-gas gun experiments Martin, L. Peter; Patterson, J. Reed; Orlikowski, Daniel Journal of Applied Physics, Vol. 102, Issue 2 https://doi.org/10.1063/1.2756058	journal	July 2007
In situ characterization of laser-generated melt pools using synchronized ultrasound and high-speed X-ray imaging Gillespie, Jared; Yeoh, Wei Yi; Zhao, Cang The Journal of the Acoustical Society of America, Vol. 150, Issue 4 https://doi.org/10.1121/10.0006386	journal	October 2021

Similar Records

Fabrication and Characterization of Graded Impedance Gas Gun Impactors from Tape Cast Metal Powders

Journal Article · 2005 · Materials Science and Engineering, A, A427, n/a, January 6, 2006, pp. 83-91 · OSTI ID:899395

Martin, L P; Nguyen, J H

Fabrication and application of high impedance graded density impactors in light gas gun experiments

Journal Article · 2013 · Review of Scientific Instruments · OSTI ID:1226961

Yep, Steven J.; Belof, Jonathan L.; Orlikowski, Daniel A.; +1 more

Comparative imaging study in ultrasound, MRI, CT, and DSA using a multimodality renal artery phantom

Journal Article · 2011 · Medical Physics · OSTI ID:22096897

King, Deirdre M.; Fagan, Andrew J.; Moran, Carmel M.; +1 more

Title: Ultrasound and X-ray Cross-Characterization of a Graded Impedance Impactor used for Shock-Ramp Compression Experiments

Citation Formats

References (20)

Similar Records

Related Subjects