Revealing 3D intragranular micromechanical fields at triple junctions

Gustafson, Sven E.; Ludwig, Wolfgang; Rodriguez-Lamas, Raquel; Yildirim, Can; Shanks, Katherine S.; Detlefs, Carsten; Sangid, Michael D.

doi:10.1016/j.actamat.2023.119300

Title: Revealing 3D intragranular micromechanical fields at triple junctions

Journal Article · 31 October 2023 · Acta Materialia

DOI: https://doi.org/10.1016/j.actamat.2023.119300 · OSTI ID:2000596

;

; Shanks, Katherine S.;

;

Not Available

View Accepted Manuscript (Publisher)

Cite

Export

Save

Sponsoring Organization:: USDOE National Nuclear Security Administration (NNSA)

Grant/Contract Number:: NA0003525

OSTI ID:: 2000596

Journal Information:: Acta Materialia, Journal Name: Acta Materialia Journal Issue: C Vol. 260; ISSN 1359-6454

Publisher:: ElsevierCopyright Statement

Country of Publication:: United States

Language:: English

References (47)

Slip localization behavior at triple junctions in nickel-base superalloys Hestroffer, Jonathan M.; Stinville, Jean-Charles; Charpagne, Marie-Agathe Acta Materialia, Vol. 249 https://doi.org/10.1016/j.actamat.2023.118801	journal	May 2023
Quantifying microscale drivers for fatigue failure via coupled synchrotron X-ray characterization and simulations Gustafson, Sven; Ludwig, Wolfgang; Shade, Paul Nature Communications, Vol. 11, Issue 1 https://doi.org/10.1038/s41467-020-16894-2	journal	June 2020
Evolution of dislocation density distributions in copper during tensile deformation Jiang, J.; Britton, T. B.; Wilkinson, A. J. Acta Materialia, Vol. 61, Issue 19 https://doi.org/10.1016/j.actamat.2013.08.027	journal	November 2013
Study of grain boundary orientation gradients through combined experiments and strain gradient crystal plasticity modeling Pai, Namit; Prakash, Aditya; Samajdar, Indradev International Journal of Plasticity, Vol. 156 https://doi.org/10.1016/j.ijplas.2022.103360	journal	September 2022
X-ray diffraction microscopy based on refractive optics Poulsen, H. F.; Jakobsen, A. C.; Simons, H. Journal of Applied Crystallography, Vol. 50, Issue 5 https://doi.org/10.1107/S1600576717011037	journal	September 2017
4D microstructural evolution in a heavily deformed ferritic alloy: A new perspective in recrystallisation studies Yildirim, C.; Mavrikakis, N.; Cook, P. K. Scripta Materialia, Vol. 214 https://doi.org/10.1016/j.scriptamat.2022.114689	journal	June 2022
Very high cycle fatigue of copper: Evolution, morphology and locations of surface slip markings Phung, N. L.; Favier, V.; Ranc, N. International Journal of Fatigue, Vol. 63 https://doi.org/10.1016/j.ijfatigue.2014.01.007	journal	June 2014
A theoretical investigation into the nucleation of stable crack precursors in polycrystalline ice Wu, Mao S.; Niu, Jian International Journal of Fracture, Vol. 68, Issue 2 https://doi.org/10.1007/BF00032465	journal	July 1994
Three-dimensional X-ray structural microscopy with submicrometre resolution Larson, B. C.; Yang, Wenge; Ice, G. E. Nature, Vol. 415, p. 887-890 https://doi.org/10.1038/415887a	journal	February 2002
Dislocation density distribution at slip band-grain boundary intersections Guo, Yi; Collins, David M.; Tarleton, Edmund Acta Materialia, Vol. 182 https://doi.org/10.1016/j.actamat.2019.10.031	journal	January 2020
The ESRF dark-field x-ray microscope at ID06 Kutsal, M.; Bernard, P.; Berruyer, G. IOP Conference Series: Materials Science and Engineering, Vol. 580 https://doi.org/10.1088/1757-899X/580/1/012007	journal	December 2019
Effects of grain boundary- and triple junction-character on intergranular fatigue crack nucleation in polycrystalline aluminum Kobayashi, Shigeaki; Inomata, Toshiyuki; Kobayashi, Hiroyuki Journal of Materials Science, Vol. 43, Issue 11 https://doi.org/10.1007/s10853-007-2236-z	journal	June 2008
Multi scale hard x-ray microscopy Poulsen, H. F. Current Opinion in Solid State and Materials Science, Vol. 24, Issue 2 https://doi.org/10.1016/j.cossms.2020.100820	journal	April 2020
Some geometrical relations in dislocated crystals Nye, J. F. Acta Metallurgica, Vol. 1, Issue 2 https://doi.org/10.1016/0001-6160(53)90054-6	journal	March 1953
Dynamic recovery observed in distinct grains within a polycrystalline nickel-based superalloy during cyclic high temperature fatigue via high energy X-ray diffraction microscopy Gustafson, Sven E.; Pagan, Darren C.; Shade, Paul A. Scripta Materialia, Vol. 192 https://doi.org/10.1016/j.scriptamat.2020.10.004	journal	February 2021
A rotational and axial motion system load frame insert for in situ high energy x-ray studies Shade, Paul A.; Blank, Basil; Schuren, Jay C. Review of Scientific Instruments, Vol. 86, Issue 9 https://doi.org/10.1063/1.4927855	journal	September 2015
High-resolution elastic strain measurement from electron backscatter diffraction patterns: New levels of sensitivity Wilkinson, Angus J.; Meaden, Graham; Dingley, David J. Ultramicroscopy, Vol. 106, Issue 4-5 https://doi.org/10.1016/j.ultramic.2005.10.001	journal	March 2006
Dark-field X-ray microscopy for multiscale structural characterization Simons, H.; King, A.; Ludwig, W. Nature Communications, Vol. 6, Issue 1 https://doi.org/10.1038/ncomms7098	journal	January 2015
Nondestructive Mapping of Long-Range Dislocation Strain Fields in an Epitaxial Complex Metal Oxide Simons, Hugh; Jakobsen, Anders Clemen; Ahl, Sonja Rosenlund Nano Letters, Vol. 19, Issue 3 https://doi.org/10.1021/acs.nanolett.8b03839	journal	February 2019
Resolving the geometrically necessary dislocation content by conventional electron backscattering diffraction Pantleon, W. Scripta Materialia, Vol. 58, Issue 11 https://doi.org/10.1016/j.scriptamat.2008.01.050	journal	June 2008
Nanohardness of molybdenum in the vicinity of grain boundaries and triple junctions Eliash, T.; Kazakevich, M.; Semenov, V. N. Acta Materialia, Vol. 56, Issue 19 https://doi.org/10.1016/j.actamat.2008.07.036	journal	November 2008
High-resolution electron backscatter diffraction: An emerging tool for studying local deformation Wilkinson, A. J.; Clarke, E. E.; Britton, T. B. The Journal of Strain Analysis for Engineering Design, Vol. 45, Issue 5 https://doi.org/10.1243/03093247JSA587	journal	February 2010
Determination of elastic strain fields and geometrically necessary dislocation distributions near nanoindents using electron back scatter diffraction Wilkinson, Angus J.; Randman, David Philosophical Magazine, Vol. 90, Issue 9 https://doi.org/10.1080/14786430903304145	journal	March 2010
3D mapping of orientation variation and local residual stress within individual grains of pearlitic steel using synchrotron dark field X-ray microscopy Yildirim, C.; Jessop, C.; Ahlström, J. Scripta Materialia, Vol. 197 https://doi.org/10.1016/j.scriptamat.2021.113783	journal	May 2021
Assessment of local deformation using EBSD: Quantification of accuracy of measurement and definition of local gradient Kamaya, Masayuki Ultramicroscopy, Vol. 111, Issue 8 https://doi.org/10.1016/j.ultramic.2011.02.004	journal	July 2011
Forward modeling method for microstructure reconstruction using x-ray diffraction microscopy: Single-crystal verification Suter, R. M.; Hennessy, D.; Xiao, C. Review of Scientific Instruments, Vol. 77, Issue 12 https://doi.org/10.1063/1.2400017	journal	December 2006
Differential-aperture X-ray structural microscopy: a submicron-resolution three-dimensional probe of local microstructure and strain Yang, Wenge; Larson, B. C.; Tischler, J. Z. Micron, Vol. 35, Issue 6 https://doi.org/10.1016/j.micron.2004.02.004	journal	August 2004
Orientation dependence of the cyclic deformation behavior and the role of grain boundaries in fatigue damage in copper crystals Wang, Z. G.; Zhang, Z. F.; Li, X. W. Materials Science and Engineering: A, Vol. 319-321 https://doi.org/10.1016/S0921-5093(01)01055-3	journal	December 2001
Slip localization in Inconel 718: A three-dimensional and statistical perspective Charpagne, M. A.; Hestroffer, J. M.; Polonsky, A. T. Acta Materialia, Vol. 215 https://doi.org/10.1016/j.actamat.2021.117037	journal	August 2021
Measurement of local plastic strain distribution of stainless steel by electron backscatter diffraction Kamaya, Masayuki Materials Characterization, Vol. 60, Issue 2 https://doi.org/10.1016/j.matchar.2008.07.010	journal	February 2009
In-situ study of planar slip in a commercial aluminum-lithium alloy using high energy X-ray diffraction microscopy Tayon, Wesley A.; Nygren, Kelly E.; Crooks, Roy E. Acta Materialia, Vol. 173 https://doi.org/10.1016/j.actamat.2019.04.030	journal	July 2019
Microcracking in Ceramics Induced by Thermal Expansion or Elastic Anisotropy Tvergaard, Viggo; Hutchinson, John W. Journal of the American Ceramic Society, Vol. 71, Issue 3 https://doi.org/10.1111/j.1151-2916.1988.tb05022.x	journal	March 1988
Viewpoint: experimental recovery of geometrically necessary dislocation density in polycrystals El-Dasher, B. S.; Adams, B. L.; Rollett, A. D. Scripta Materialia, Vol. 48, Issue 2 https://doi.org/10.1016/S1359-6462(02)00340-8	journal	January 2003
Effects of TiB2 particle size on the microstructure and mechanical properties of TiB2-based composites Wu, Ning; Xue, Fengdan; Yang, Hailin Ceramics International, Vol. 45, Issue 1 https://doi.org/10.1016/j.ceramint.2018.08.270	journal	January 2019
Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD Calcagnotto, Marion; Ponge, Dirk; Demir, Eralp Materials Science and Engineering: A, Vol. 527, Issue 10-11 https://doi.org/10.1016/j.msea.2010.01.004	journal	April 2010
Deformation Accommodation at Triple Junctions in Columnar-Grained Nickel Li, Mingjie; Duquette, David J.; Chen, Ying Metallurgical and Materials Transactions A, Vol. 50, Issue 1 https://doi.org/10.1007/s11661-018-4998-0	journal	November 2018
Comparison between diffraction contrast tomography and high-energy diffraction microscopy on a slightly deformed aluminium alloy Renversade, Loïc; Quey, Romain; Ludwig, Wolfgang IUCrJ, Vol. 3, Issue 1 https://doi.org/10.1107/S2052252515019995	journal	January 2016
Grain boundary hardening and triple junction hardening in polycrystalline molybdenum Kobayashi, Shigeaki; Tsurekawa, Sadahiro; Watanabe, Tadao Acta Materialia, Vol. 53, Issue 4 https://doi.org/10.1016/j.actamat.2004.11.002	journal	February 2005
Estimations of bulk geometrically necessary dislocation density using high resolution EBSD Ruggles, T. J.; Fullwood, D. T. Ultramicroscopy, Vol. 133 https://doi.org/10.1016/j.ultramic.2013.04.011	journal	October 2013
Microscale elastic‐strain determination by backscatter Kikuchi diffraction in the scanning electron microscope Troost, K. Z.; van der Sluis, P.; Gravesteijn, D. J. Applied Physics Letters, Vol. 62, Issue 10 https://doi.org/10.1063/1.108758	journal	March 1993
Grain refinement in laser manufactured Al-based composites with TiB2 ceramic Xi, Lixia; Gu, Dongdong; Guo, Shuang Journal of Materials Research and Technology, Vol. 9, Issue 3 https://doi.org/10.1016/j.jmrt.2020.04.059	journal	May 2020
Multiple slip in bicrystal deformation Livingston, J. D.; Chalmers, B. Acta Metallurgica, Vol. 5, Issue 6 https://doi.org/10.1016/0001-6160(57)90044-5	journal	June 1957
The influence of grain boundaries on mechanical properties Hirth, J. P. Metallurgical Transactions, Vol. 3, Issue 12 https://doi.org/10.1007/BF02661312	journal	December 1972
Consistent determination of geometrically necessary dislocation density from simulations and experiments Das, Suchandrima; Hofmann, Felix; Tarleton, Edmund International Journal of Plasticity, Vol. 109 https://doi.org/10.1016/j.ijplas.2018.05.001	journal	October 2018
Finite element analysis about effects of stiffness distribution on stresses and elastic strain energy near the triple junction in a tricrystal Chen, C. R.; Li, S. X.; Wen, J. L. Materials Science and Engineering: A, Vol. 282, Issue 1-2 https://doi.org/10.1016/S0921-5093(99)00760-1	journal	April 2000
DREAM.3D: A Digital Representation Environment for the Analysis of Microstructure in 3D Groeber, Michael A.; Jackson, Michael A. Integrating Materials and Manufacturing Innovation, Vol. 3, Issue 1 https://doi.org/10.1186/2193-9772-3-5	journal	April 2014
Far-field high-energy diffraction microscopy: a tool for intergranular orientation and strain analysis Bernier, J. V.; Barton, N. R.; Lienert, U. The Journal of Strain Analysis for Engineering Design, Vol. 46, Issue 7 https://doi.org/10.1177/0309324711405761	journal	July 2011

Similar Records

Description of microstructural intragranular heterogeneities in a Ti-IF steel using a micromechanical approach

Journal Article · 2007 · AIP Conference Proceedings · OSTI ID:21056966

Wauthier, A; Brenner, R; Bacroix, B; +1 more

Calculation of Grain Boundary Angles at Triple Junctions in 3D Digitized Microstructure.

Conference · 2010 · OSTI ID:1124328

Chandross, Michael Evan; Holm, Elizabeth A

Tuning proton transfer and catalytic properties in triple junction nanostructured catalyts

Journal Article · 2021 · Nano Energy · OSTI ID:1817257

Chu, Yuanyuan; Sanyal, Udishnu; Li, Xiaohong S.; +13 more

Title: Revealing 3D intragranular micromechanical fields at triple junctions

Citation Formats

References (47)

Similar Records

Related Subjects