Title: Advanced wind turbine control development using field test analysis for generator overspeed mitigation

Journal Article · · Wind Energy
DOI: https://doi.org/10.1002/we.2860 · OSTI ID:1998974
ORCiD logo [1]; ORCiD logo [2];  [3]
  1. Aerospace Engineering Sciences University of Colorado Boulder Boulder Colorado USA
  2. National Renewable Energy Laboratory Golden Colorado USA
  3. Electrical, Computer and Energy Engineering University of Colorado Boulder Boulder Colorado USA, Renewable and Sustainable Energy Institute Boulder Colorado USA

Abstract Turbulent and gusty wind conditions can cause generator overspeed peaks to exceed a threshold that then lead to wind turbine shutdowns, which then decrease the energy production of the wind turbines. We derive so‐called “gust measures” that predict when generator overspeed peaks may occur. These gust measures are then used to develop advanced controllers to mitigate generator overspeed peaks so that wind turbines can operate more robustly in difficult wind conditions without exceeding generator overspeed thresholds that would lead to turbine shutdown events. The advanced controllers are demonstrated in nonlinear aeroelastic simulations using the open‐source wind turbine simulation tool OpenFAST. To increase the realism of the simulations, they are run using field‐replicated wind conditions and a wind turbine model based on data from an experimental field campaign on a downscaled demonstrator of a novel extreme‐scale, two‐bladed, downwind rotor design.

Research Organization:
National Renewable Energy Laboratory (NREL), Golden, CO (United States)
Sponsoring Organization:
USDOE; USDOE Advanced Research Projects Agency - Energy (ARPA-E)
Grant/Contract Number:
AC36-08GO28308; AR0000667
OSTI ID:
1998974
Report Number(s):
NREL/JA-5000-84216
Journal Information:
Wind Energy, Journal Name: Wind Energy Journal Issue: 11 Vol. 27; ISSN 1095-4244
Publisher:
Wiley Blackwell (John Wiley & Sons)Copyright Statement
Country of Publication:
United Kingdom
Language:
English

References (21)

Downwind pre-aligned rotors for extreme-scale wind turbines: Downwind pre-aligned rotors for extreme-scale wind turbines journal January 2017
Constrained power reference control for wind turbines journal December 2021
Design space exploration and decision‐making for a segmented ultralight morphing 50‐MW wind turbine journal September 2022
Aero‐servo‐elastic co‐optimization of large wind turbine blades with distributed aerodynamic control devices journal May 2023
Individual Blade Pitch Control for Load Reduction journal January 2003
Application and Validation of Peak Shaving to Improve Performance of a 100 kW Wind Turbine journal November 2019
Control co-design of 13 MW downwind two-bladed rotors to achieve 25% reduction in levelized cost of wind energy journal January 2021
Models used for the simulation and control of a segmented ultralight morphing rotor journal July 2017
A gravo-aeroelastically scaled wind turbine rotor at field-prototype scale with strict structural requirements journal August 2020
Servo-aero-gravo-elastic (SAGE) scaling and its application to a 13-MW downwind turbine journal November 2020
Distributed Aerodynamic Control using Active Trailing-Edge Flaps for Large Wind Turbines journal September 2020
Control of Wind Turbines journal March 2011
Design and analysis of a segmented blade for a 50 MW wind turbine rotor journal January 2022
Constrained Wind Turbine Power Control conference July 2019
On the Severity of Wind Turbine Generator Speed Peaks in Response to Particular Gusts conference June 2022
Generalized multipoint inverse airfoil design journal November 1992
Multi-Blade Coordinate Transformation and its Application to Wind Turbine Analysis conference June 2012
Disturbance Accommodating Control of Floating Offshore Wind Turbines conference January 2009
Aerodynamic Design of the 13.2 MW SUMR-13i Wind Turbine Rotor conference January 2018
Design and Testing of a Scaled Demonstrator Turbine at the National Wind Technology Center conference January 2019
Grand challenges in the design, manufacture, and operation of future wind turbine systems journal July 2023