DOE PAGES title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Analysis of combustion chamber deposit growth on temperature swing thermal barrier coatings in a spark ignition engine

Journal Article · · International Journal of Engine Research

Temperature swing thermal barrier coatings (TBCs) have the potential to improve efficiency and performance through thermal management of the combustion chamber. However, the effects of combustion chamber deposits (CCDs) on the surface of the TBCs are unclear. Therefore, this paper analyzes the impact of CCD formation on a temperature swing TBC. A piston and a heat flux probe coated with a novel material are installed in a single-cylinder research engine at a low-load condition for 62.5 h to promote CCD growth. Every 12.5 h, the performance at a knock limited condition is assessed and thermophysical property measurements on the heat flux probe are performed. Net thermal efficiency increased by 0.4% absolute after 12.5 h relative to the baseline condition, but further CCD growth caused a dithering of efficiency between the 12.5 h and baseline points. The KLSA retarded consistently throughout this period. As a result, external property measurements with the coated heat flux probe showed an improvement in the thermophysical properties of the TBC/CCD layer.

Research Organization:
Solution Spray Technologies LLC, Storrs, CT (United States)
Sponsoring Organization:
USDOE Office of Science (SC), Office of SBIR/STTR Programs (SBIR/STTR)
Grant/Contract Number:
SC0019865
OSTI ID:
1997416
Journal Information:
International Journal of Engine Research, Vol. 24, Issue 7; ISSN 1468-0874
Publisher:
SAGECopyright Statement
Country of Publication:
United States
Language:
English

References (37)

TACOM/Cummins Adiabatic Engine Program conference February 1983
Development and Use of a Computer Simulation of the Turbocompounded Diesel System for Engine Performance and Component Heat Transfer Studies conference March 1986
The Effects of Ceramic Coatings on Diesel Engine Performance and Exhaust Emissions conference February 1991
Selective Heat Insulation of Combustion Chamber Walls for a DI Diesel Engine with Monolithic Ceramics conference February 1989
The Effect of Thin Ceramic Coatings on Spark-Ignition Engine Performance conference April 1990
Performance of Thin-Ceramic-Coated Combustion Chamber with Gasoline and Methanol as Fuels in a Two-Stroke SI Engine conference October 1994
Preliminary Testing of Metal-Based Thermal Barrier Coating in a Spark-Ignition Engine journal April 2010
An Investigation of Metal and Ceramic Thermal Barrier Coatings in a Spark-Ignition Engine journal October 2010
A parametric modeling study of thermal barrier coatings in low-temperature combustion engines journal January 2022
Concept of “Temperature Swing Heat Insulation” in Combustion Chamber Walls, and Appropriate Thermo-Physical Properties for Heat Insulation Coat journal April 2013
Conjugate heat transfer study of the impact of ‘thermo-swing’ coatings on internal combustion engines heat losses journal October 2020
Assessing the Impact of a Novel TBC Material on Heat Transfer in a Spark Ignition Engine through 3D CFD-FEA Co-Simulation Routine conference March 2022
Impact of a Yttria-Stabilized Zirconia Thermal Barrier Coating on HCCI Engine Combustion, Emissions, and Efficiency journal August 2017
Experimental investigation of the relationship between thermal barrier coating structured porosity and homogeneous charge compression ignition engine combustion journal July 2019
Low Heat Capacitance Thermal Barrier Coatings for Internal Combustion Engines conference April 2019
Experimental assessment of new insulation coatings for lean burn spark-ignited engines journal January 2020
Assessing the capability of conventional in-cylinder insulation materials in achieving temperature swing engine performance benefits journal August 2017
The impact of piston thermal barrier coating roughness on high-load diesel operation journal December 2019
A Laboratory Simulation and Mechanism for the Fuel Dependence of SI Combustion Chamber Deposit Formation conference October 1995
Average Molecular Structure of Gasoline Engine Combustion Chamber Deposits Obtained by Solid-State 13C, 31P, and 1H Nuclear Magnetic Resonance Spectroscopy conference October 1993
A Physical Mechanism for Deposit Formation in a Combustion Chamber conference October 1994
Effect of Engine Operating Parameters on Engine Combustion Chamber Deposits conference October 1990
Characterizing the Effect of Combustion Chamber Deposits on a Gasoline HCCI Engine conference October 2006
An Experimental Study of Combustion Chamber Deposits and Their Effects in a Spark-Ignition Engine conference February 1995
An In Situ Determination of the Thermal Properties of Gombustion-Chamber Deposits conference February 1982
The Determination of Thermal Properties of Engine Combustion Chamber Deposits conference March 2000
Dynamic knock detection and quantification in a spark ignition engine by means of a pressure based method journal December 2012
Development of a Device for the Nondestructive Thermal Diffusivity Determination of Combustion Chamber Deposits and Thin Coatings journal March 2014
A Technique to Measure Thermal Diffusivity and Thickness of Combustion Chamber Deposits In-Situ conference October 1998
A Guide to Uncertainty Quantification for Experimental Engine Research and Heat Release Analysis journal February 2019
The impact of a magnesium zirconate thermal barrier coating on homogeneous charge compression ignition operational variability and the formation of combustion chamber deposits journal November 2014
Measurement of thermal properties of a ceramic/metal joint by laser flash method journal December 2010
Analysis of the effects of wall temperature swing on reciprocating internal combustion engine processes journal July 2017
Optical profilometer based on the principle of differential interference journal May 2001
Diurnal and Seasonal Variability of Gasoline-Related Volatile Organic Compound Emissions in Riverside, California journal June 2009
Effects of Gasoline and Gasoline Detergents on Combustion Chamber Deposit Formation conference October 1994
Study on Combustion Chamber Deposit Formation Mechanism -Influence of Fuel Components and Gasoline Detergents- conference May 1997