Improving tensile properties of a room-temperature formable and heat-treatable Mg–6Zn-0.2Ca (wt.%) alloy sheet via micro-alloying of Al and Mn

Nakata, T.; Xu, C.; Kamado, S.

doi:10.1016/j.msea.2019.138690

Title: Improving tensile properties of a room-temperature formable and heat-treatable Mg–6Zn-0.2Ca (wt.%) alloy sheet via micro-alloying of Al and Mn

Journal Article · 31 December 2019 · Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing

DOI: https://doi.org/10.1016/j.msea.2019.138690 · OSTI ID:1984563

Nakata, T.; Xu, C.; Kamado, S.

Not Available

View Accepted Manuscript (Publisher)

Cite

Export

Save

Sponsoring Organization:: USDOE Office of Electricity (OE), Advanced Grid Research & Development. Power Systems Engineering Research

OSTI ID:: 1984563

Journal Information:: Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing, Journal Name: Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing Journal Issue: C Vol. 772; ISSN 0921-5093

Publisher:: ElsevierCopyright Statement

Country of Publication:: Netherlands

Language:: English

References (44)

The determination of foil thickness by scanning transmission electron microscopy Kelly, P. M.; Jostsons, A.; Blake, R. G. Physica Status Solidi (a), Vol. 31, Issue 2 https://doi.org/10.1002/pssa.2210310251	journal	October 1975
Precipitate strengthening mechanisms in magnesium zinc alloy single crystals Chun, J. S.; Byrne, J. G. Journal of Materials Science, Vol. 4, Issue 10 https://doi.org/10.1007/BF00549777	journal	October 1969
The influence of polycrystal grain size on several mechanical properties of materials Armstrong, R. W. Metallurgical and Materials Transactions B, Vol. 1, Issue 5 https://doi.org/10.1007/BF02900227	journal	May 1970
Texture Evolution in Mg-Zn-Ca Alloy Sheets Kim, D. -W.; Suh, B. -C.; Shim, M. -S. Metallurgical and Materials Transactions A, Vol. 44, Issue 7 https://doi.org/10.1007/s11661-013-1674-2	journal	March 2013
Effects of Si on the aging behaviour and formability of aluminium alloys based on AA6016 Hirth, S. M.; Marshall, G. J.; Court, S. A. Materials Science and Engineering: A, Vol. 319-321 https://doi.org/10.1016/S0921-5093(01)00969-8	journal	December 2001
The activity of non-basal slip systems and dynamic recovery at room temperature in fine-grained AZ31B magnesium alloys Koike, J.; Kobayashi, T.; Mukai, T. Acta Materialia, Vol. 51, Issue 7 https://doi.org/10.1016/S1359-6454(03)00005-3	journal	April 2003
Effects of precipitate shape and orientation on dispersion strengthening in magnesium alloys Nie, J. F. Scripta Materialia, Vol. 48, Issue 8 https://doi.org/10.1016/S1359-6462(02)00497-9	journal	April 2003
The texture and anisotropy of magnesium–zinc–rare earth alloy sheets Bohlen, Jan; Nürnberg, Marcus R.; Senn, Jeremy W. Acta Materialia, Vol. 55, Issue 6 https://doi.org/10.1016/j.actamat.2006.11.013	journal	April 2007
Mechanical anisotropy and deep drawing behaviour of AZ31 and ZE10 magnesium alloy sheets Yi, Sangbong; Bohlen, Jan; Heinemann, Frank Acta Materialia, Vol. 58, Issue 2 https://doi.org/10.1016/j.actamat.2009.09.038	journal	January 2010
Superior light metals by texture engineering: Optimized aluminum and magnesium alloys for automotive applications Hirsch, J.; Al-Samman, T. Acta Materialia, Vol. 61, Issue 3 https://doi.org/10.1016/j.actamat.2012.10.044	journal	February 2013
Effects of group II elements on the cold stretch formability of Mg–Zn alloys Yuasa, Motohiro; Miyazawa, Naoki; Hayashi, Makoto Acta Materialia, Vol. 83 https://doi.org/10.1016/j.actamat.2014.10.005	journal	January 2015
Strong and ductile heat-treatable Mg–Sn–Zn–Al wrought alloys Sasaki, T. T.; Elsayed, F. R.; Nakata, T. Acta Materialia, Vol. 99 https://doi.org/10.1016/j.actamat.2015.06.060	journal	October 2015
Bake-hardenable Mg–Al–Zn–Mn–Ca sheet alloy processed by twin-roll casting Bian, M. Z.; Sasaki, T. T.; Nakata, T. Acta Materialia, Vol. 158 https://doi.org/10.1016/j.actamat.2018.07.057	journal	October 2018
Improvement of formability of Mg–Al–Zn alloy sheet at low temperatures using differential speed rolling Huang, Xinsheng; Suzuki, Kazutaka; Watazu, Akira Journal of Alloys and Compounds, Vol. 470, Issue 1-2 https://doi.org/10.1016/j.jallcom.2008.02.029	journal	February 2009
Excellent room-temperature ductility and formability of rolled Mg–Gd–Zn alloy sheets Wu, D.; Chen, R. S.; Han, E. H. Journal of Alloys and Compounds, Vol. 509, Issue 6 https://doi.org/10.1016/j.jallcom.2010.11.141	journal	February 2011
Influence of warm pre-stretching on microstructure and properties of AZ31 magnesium alloy Zhang, Hua; Huang, Guangsheng; Li, Jinhan Journal of Alloys and Compounds, Vol. 563 https://doi.org/10.1016/j.jallcom.2013.02.097	journal	June 2013
Origin of texture weakening in a rolled ZEX4101 alloy sheet and its effect on room temperature formability and tensile property Nakata, T.; Xu, C.; Uehara, Y. Journal of Alloys and Compounds, Vol. 782 https://doi.org/10.1016/j.jallcom.2018.12.194	journal	April 2019
Improvement of formability from room temperature to warm temperature in AZ-31 magnesium alloy Iwanaga, K.; Tashiro, H.; Okamoto, H. Journal of Materials Processing Technology, Vol. 155-156 https://doi.org/10.1016/j.jmatprotec.2004.04.181	journal	November 2004
Effects of aging parameters on formability of 6061-O alloy Ozturk, Fahrettin; Esener, Emre; Toros, Serkan Materials & Design, Vol. 31, Issue 10 https://doi.org/10.1016/j.matdes.2010.05.050	journal	December 2010
Influence of Mn content on mechanical properties and fatigue behavior of extruded Mg alloys Khan, Sabrina Alam; Miyashita, Yukio; Mutoh, Yoshiharu Materials Science and Engineering: A, Vol. 420, Issue 1-2 https://doi.org/10.1016/j.msea.2006.01.091	journal	March 2006
Microstructural evolution in twin-roll strip cast Mg–Zn–Mn–Al alloy Park, Sung S.; Oh, Yoon S.; Kang, Dae H. Materials Science and Engineering: A, Vol. 449-451 https://doi.org/10.1016/j.msea.2006.02.389	journal	March 2007
Enhancement of tensile ductility and stretch formability of magnesium by addition of 0.2wt%(0.035at%)Ce Chino, Yasumasa; Kado, Motohisa; Mabuchi, Mamoru Materials Science and Engineering: A, Vol. 494, Issue 1-2 https://doi.org/10.1016/j.msea.2008.04.059	journal	October 2008
Texture and stretch formability of a rolled Mg–Zn alloy containing dilute content of Y Chino, Yasumasa; Sassa, Kensuke; Mabuchi, Mamoru Materials Science and Engineering: A, Vol. 513-514 https://doi.org/10.1016/j.msea.2009.01.074	journal	July 2009
Influence of Zn concentration on stretch formability at room temperature of Mg–Zn–Ce alloy Chino, Yasumasa; Huang, Xinsheng; Suzuki, Kazutaka Materials Science and Engineering: A, Vol. 528, Issue 2 https://doi.org/10.1016/j.msea.2010.09.081	journal	December 2010
Experimental study of fracture behavior of magnesium single crystals Kaushik, V.; Narasimhan, R.; Mishra, R. K. Materials Science and Engineering: A, Vol. 590 https://doi.org/10.1016/j.msea.2013.10.018	journal	January 2014
High strength and formable Mg–6.2Zn–0.5Zr–0.2Ca alloy sheet processed by twin roll casting Bhattacharjee, T.; Suh, B. -C; Sasaki, T. T. Materials Science and Engineering: A, Vol. 609 https://doi.org/10.1016/j.msea.2014.04.058	journal	July 2014
Influences of grain size on mechanical properties and cold formability of Mg–3Al–1Zn alloy sheets with similar weak initial textures Huang, Xinsheng; Chino, Yasumasa; Mabuchi, Mamoru Materials Science and Engineering: A, Vol. 611 https://doi.org/10.1016/j.msea.2014.05.083	journal	August 2014
Microstructure evolution and mechanical response of extruded AZ31B magnesium alloy sheet at large strains followed by annealing treatment Dong, Jingren; Zhang, Dingfei; Dong, Yufeng Materials Science and Engineering: A, Vol. 618 https://doi.org/10.1016/j.msea.2014.09.057	journal	November 2014
Influence of aluminum content on the texture and sheet formability of AM series magnesium alloys Huang, Xinsheng; Suzuki, Kazutaka; Chino, Yasumasa Materials Science and Engineering: A, Vol. 633 https://doi.org/10.1016/j.msea.2015.03.018	journal	May 2015
Improved mechanical properties of AZ31 magnesium alloy sheets by repeated cold rolling and annealing using a small pass reduction Zhang, Hua; Cheng, Weili; Fan, Jianfeng Materials Science and Engineering: A, Vol. 637 https://doi.org/10.1016/j.msea.2015.04.057	journal	June 2015
Enhancement of room temperature stretch formability via grain boundary sliding in magnesium alloy Somekawa, Hidetoshi; Kinoshita, Akihito; Washio, Kota Materials Science and Engineering: A, Vol. 676 https://doi.org/10.1016/j.msea.2016.09.014	journal	October 2016
Deformation behaviors of twin roll cast Mg-Zn-X-Ca alloys for enhanced room-temperature formability Park, Sang Jun; Jung, Hwa Chul; Shin, Kwang Seon Materials Science and Engineering: A, Vol. 679 https://doi.org/10.1016/j.msea.2016.10.046	journal	January 2017
Improving mechanical properties and yield asymmetry in high-speed extrudable Mg-1.1Al-0.24Ca (wt%) alloy by high Mn addition Nakata, T.; Xu, C.; Ajima, R. Materials Science and Engineering: A, Vol. 712 https://doi.org/10.1016/j.msea.2017.11.085	journal	January 2018
Effects of rolling conditions on the microstructure and mechanical properties in a Mg–Al–Ca–Mn–Zn alloy sheet Bian, M. Z.; Sasaki, T. T.; Nakata, T. Materials Science and Engineering: A, Vol. 730 https://doi.org/10.1016/j.msea.2018.05.065	journal	July 2018
Achieving ultra-low planar anisotropy and high stretch formability in a Mg-1.1Zn-0.76Y-0.56Zr sheet by texture tailoring via final-pass heavy reduction rolling Shi, B. Q.; Xiao, Y. H.; Shang, X. L. Materials Science and Engineering: A, Vol. 746 https://doi.org/10.1016/j.msea.2018.12.116	journal	February 2019
Grain refinement of magnesium alloys by zirconium: Formation of equiaxed grains Qian, Ma; Das, A. Scripta Materialia, Vol. 54, Issue 5 https://doi.org/10.1016/j.scriptamat.2005.11.002	journal	March 2006
Microstructure and tensile properties of twin-roll cast Mg–Zn–Mn–Al alloys Park, S. S.; Bae, G. T.; Kang, D. H. Scripta Materialia, Vol. 57, Issue 9 https://doi.org/10.1016/j.scriptamat.2007.07.013	journal	November 2007
Textures and stretch formability of Mg–6Al–1Zn magnesium alloy sheets rolled at high temperatures up to 793K Huang, Xinsheng; Suzuki, Kazutaka; Saito, Naobumi Scripta Materialia, Vol. 60, Issue 8 https://doi.org/10.1016/j.scriptamat.2008.12.035	journal	April 2009
Relationship between stretch formability and work-hardening capacity of twin-roll cast Mg alloys at room temperature Kang, D. H.; Kim, D. -W.; Kim, S. Scripta Materialia, Vol. 61, Issue 7 https://doi.org/10.1016/j.scriptamat.2009.06.026	journal	October 2009
A heat-treatable Mg–Al–Ca–Mn–Zn sheet alloy with good room temperature formability Bian, M. Z.; Sasaki, T. T.; Suh, B. C. Scripta Materialia, Vol. 138 https://doi.org/10.1016/j.scriptamat.2017.05.034	journal	September 2017
Precipitate Crystal Structure Determination in Melt Spun Mg-1.5wt%Ca-6wt%Zn Alloy Jardim, Paula M.; Solórzano, Guillermo; Sande, John B. Vander Microscopy and Microanalysis, Vol. 8, Issue 6 https://doi.org/10.1017/S1431927602010413	journal	December 2002
Designing a magnesium alloy with high strength and high formability Trang, T. T. T.; Zhang, J. H.; Kim, J. H. Nature Communications, Vol. 9, Issue 1 https://doi.org/10.1038/s41467-018-04981-4	journal	June 2018
Twinning-mediated formability in Mg alloys Suh, Byeong-Chan; Kim, Jae H.; Hwang, Ji Hyun Scientific Reports, Vol. 6, Issue 1 https://doi.org/10.1038/srep22364	journal	March 2016
Effects of Ca on Tensile Properties and Stretch Formability at Room Temperature in Mg-Zn and Mg-Al Alloys Chino, Yasumasa; Ueda, Takamichi; Otomatsu, Yuki MATERIALS TRANSACTIONS, Vol. 52, Issue 7 https://doi.org/10.2320/matertrans.M2011048	journal	January 2011

Similar Records

A new magnesium sheet alloy with high tensile properties and room-temperature formability

Journal Article · 2020 · Scientific Reports · OSTI ID:1635152

Shi, Renhai; Miao, Jiashi; Avey, Thomas; +1 more

Improving the Elevated-Temperature Properties by Two-Step Heat Treatments in Al-Mn-Mg 3004 Alloys

Journal Article · 2018 · Metallurgical and Materials Transactions B, Process Metallurgy and Materials Processing Science · OSTI ID:22857905

Ma, H.; Chen, X. Grant

Tensile Property of Al-Mg-Sc-Zr Alloy at Cryogenic Temperature

Journal Article · 2006 · AIP Conference Proceedings · OSTI ID:20800166

Zhao, W T; Yan, D S; Li, X Y; +2 more

Title: Improving tensile properties of a room-temperature formable and heat-treatable Mg–6Zn-0.2Ca (wt.%) alloy sheet via micro-alloying of Al and Mn

Citation Formats

References (44)

Similar Records

Related Subjects