DOE PAGES title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Thermohydraulic Design Analysis of the Target Assembly in the Material Plasma Exposure Experiment Facility

Journal Article · · Fusion Science and Technology

The Material Plasma Exposure eXperiment (MPEX) project seeks to design a steady-state linear plasma facility at Oak Ridge National Laboratory that will be used to study plasma-material interactions (PMIs) at fusion prototypic levels, supporting the evaluation and development of materials for the next generation of fusion devices. This study is focused on PMI exposure of small-size neutron-irradiated specimens, which are clamped onto an actively cooled component. A thermohydraulic evaluation of a new MPEX target assembly design to assess the appropriate operation during MPEX operation is presented. To further guide the design and assess the structural integrity of the components under expected loads, preliminary thermomechanical stress analyses were also conducted. To ensure good thermal contact between the components, thermal interface materials, such as silver flexible graphite, were used in the assembly. It was found that the maximum target temperatures of 1572, 1463, and 1315 K were obtained for Grafoil thicknesses of 0.61, 0.38, and 0.25 mm, respectively. The distribution of the axial deformation at high heat fluxes showed that there are no gaps between components, indicating good contact at material interfaces. Moreover, the contact pressure between the target and other components indicated that very good contact was established at these interfaces. Furthermore, the stress-strain conditions for the target will be further used to assess the appropriate operation during MPEX experiments and gain insight into materials science phenomena during PMI experiments.

Research Organization:
Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)
Sponsoring Organization:
USDOE Office of Science (SC), Fusion Energy Sciences (FES)
Grant/Contract Number:
AC05-00OR22725
OSTI ID:
1984365
Journal Information:
Fusion Science and Technology, Vol. 79, Issue 8; ISSN 1536-1055
Publisher:
Taylor & FrancisCopyright Statement
Country of Publication:
United States
Language:
English

References (22)

Brazing residual stresses in Glidcop-Al12SiBe journal June 1996
Impingement cooling of a semi-cylindrical concave channel by confined slot-air-jet journal December 2001
High-Heat-Flux Testing of Irradiated Tungsten-Based Materials for Fusion Applications Using Infrared Plasma Arc Lamps journal November 2014
Experimental Validation of a Computational Fluid Dynamics Methodology for Transitional Flow Heat Transfer Characteristics of a Steady Impinging Jet journal June 2014
Strength and fatigue of dispersion-strengthened copper journal March 1991
A review on thermophysical properties of flexible graphite journal January 2020
Thermo-Mechanical Distortion of Tungsten-Coated Steel During High Heat Flux Testing Using Plasma Arc Lamps journal March 2022
Effective Thermophysical Properties of Thermal Interface Materials: Part II — Experiments and Data conference January 2003
Latest Results from Proto-MPEX and the Future Plans for MPEX journal June 2019
PHENIX U.S.-Japan Collaboration Investigation of Thermal and Mechanical Properties of Thermal Neutron–Shielded Irradiated Tungsten journal May 2019
Surface morphology of Tungsten-F82H after high-heat flux testing using plasma-arc lamps journal August 2018
Investigation of the effect of confinement on the heat transfer to round impinging jets exiting a long pipe journal February 2006
Assessment of tungsten for use in the ITER plasma facing components journal October 1998
ANSYS Workbench System Coupling: a state-of-the-art computational framework for analyzing multiphysics problems journal November 2017
High-Heat-Flux Target Design for the Material Plasma Exposure eXperiment journal July 2019
Two-equation eddy-viscosity turbulence models for engineering applications journal August 1994
A review of heat transfer data for single circular jet impingement journal June 1992
Quantitative estimation of thermal contact conductance of a real front-end component at SPring-8 front-ends journal December 2007
A 6 MW/m 2 High Heat Flux Testing Facility of Irradiated Materials Using Infrared Plasma-Arc Lamps journal June 2019
Tensile and low-cycle fatigue measurements on cross-rolled tungsten journal January 1981
Thermal Fatigue Life of Glidcop Al-15 High-Heat-Load Components conference January 2010
Tungsten and CFC degradation under combined high cycle transient and steady state heat loads journal August 2012