Carbon nanotube (CNT) reinforced 316L stainless steel composites made by laser powder bed fusion: Microstructure and wear response

Yin, Houshang; Yang, Jingfan; Zhang, Yuying; Crilly, Larkin; Jackson, Robert L.; Lou, Xiaoyuan

doi:10.1016/j.wear.2022.204281

Title: Carbon nanotube (CNT) reinforced 316L stainless steel composites made by laser powder bed fusion: Microstructure and wear response

Journal Article · 08 February 2022 · Wear

DOI: https://doi.org/10.1016/j.wear.2022.204281 · OSTI ID:1977708

^[1];

^[2];

^[3]; Crilly, Larkin ^[2]; Jackson, Robert L. ^[2];

^[2]

Auburn University, AL (United States); OSTI
Auburn University, AL (United States)
University of Delaware, Newark, DE (United States)

Carbon nanotube (CNT) reinforced 316L stainless steel (SS) composites were fabricated by laser powder bed fusion (LPBF) additive manufacturing (AM). This study focuses on microstructure evolution, hardness, and wear behavior. The wear behavior for AM 316L SS and 1 wt% CNT/316L SS was studied by a dry sliding test under normal loads of 10, 15, and 25 N. The addition of CNT to 316L SS led to the change of solidification mode from cellular/columnar to dendritic growth, producing grain refinement. Nanoscale dendrites were observed. Although TEM characterization confirmed the existence of CNT in cell interior, most CNT were damaged, resulting in carbon material segregation along cellular/dendritic boundaries. The wear rate was found dramatically decreased due to the improved hardness. Compared to the adhesive and abrasive wear in AM 316L SS, the wear mechanism of CNT/316L composite was adhesion and oxidative wear. Furthermore, enhanced cellular/dendritic boundary strengthening by carbon segregation was the main strengthening mechanism of CNT/316L composite.

View Accepted Manuscript (DOE)

Cite

Export

Save

Research Organization:: Auburn University, AL (United States)

Sponsoring Organization:: USDOE Office of Nuclear Energy (NE)

Grant/Contract Number:: NE0009016

OSTI ID:: 1977708

Journal Information:: Wear, Journal Name: Wear Journal Issue: C Vol. 496-497; ISSN 0043-1648

Publisher:: ElsevierCopyright Statement

Country of Publication:: United States

Language:: English

References (56)

Oxide Formation, Morphology, and Nanohardness of Laser-Patterned Steel Surfaces Rosenkranz, Andreas; Reinert, Leander; Gachot, Carsten Advanced Engineering Materials, Vol. 17, Issue 8 https://doi.org/10.1002/adem.201400487	journal	January 2015
Phase instabilities during high temperature exposure of 316 austenitic stainless steel Weiss, B.; Stickler, R. Metallurgical and Materials Transactions B, Vol. 3, Issue 4 https://doi.org/10.1007/BF02647659	journal	April 1972
Theoretical and Finite Element Analysis of Static Friction Between Multi-Scale Rough Surfaces Wang, Xianzhang; Xu, Yang; Jackson, Robert L. Tribology Letters, Vol. 66, Issue 4 https://doi.org/10.1007/s11249-018-1099-6	journal	October 2018
Metal Additive Manufacturing: A Review Frazier, William E. Journal of Materials Engineering and Performance, Vol. 23, Issue 6 https://doi.org/10.1007/s11665-014-0958-z	journal	April 2014
The nucleation of M23C6 carbide particles in the grain boundaries of an austenitic stainless steel Adamson, J. P.; Martin, J. W. Acta Metallurgica, Vol. 19, Issue 10 https://doi.org/10.1016/0001-6160(71)90033-2	journal	October 1971
Indentation size effects in crystalline materials: A law for strain gradient plasticity Nix, William D.; Gao, Huajian Journal of the Mechanics and Physics of Solids, Vol. 46, Issue 3 https://doi.org/10.1016/S0022-5096(97)00086-0	journal	March 1998
Effects of yttrium on microstructure, mechanical properties and high-temperature wear behavior of cast Stellite 6 alloy Wang, Linchun; Li, D. Y. Wear, Vol. 255, Issue 1-6 https://doi.org/10.1016/S0043-1648(03)00057-7	journal	August 2003
Processing and properties of particulate reinforced steel matrix composites Pagounis, E.; Lindroos, V. K. Materials Science and Engineering: A, Vol. 246, Issue 1-2 https://doi.org/10.1016/S0921-5093(97)00710-7	journal	May 1998
Improving the wettability of aluminum on carbon nanotubes So, Kang Pyo; Lee, Il Ha; Duong, Dinh Loc Acta Materialia, Vol. 59, Issue 9 https://doi.org/10.1016/j.actamat.2011.01.061	journal	May 2011
Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones Khairallah, Saad A.; Anderson, Andrew T.; Rubenchik, Alexander Acta Materialia, Vol. 108 https://doi.org/10.1016/j.actamat.2016.02.014	journal	April 2016
Origin of dislocation structures in an additively manufactured austenitic stainless steel 316L Bertsch, K. M.; Meric de Bellefon, G.; Kuehl, B. Acta Materialia, Vol. 199 https://doi.org/10.1016/j.actamat.2020.07.063	journal	October 2020
New insights on cellular structures strengthening mechanisms and thermal stability of an austenitic stainless steel fabricated by laser powder-bed-fusion Voisin, Thomas; Forien, Jean-Baptiste; Perron, Aurelien Acta Materialia, Vol. 203 https://doi.org/10.1016/j.actamat.2020.11.018	journal	January 2021
Enhanced tribological properties of MWCNT/Ni bulk composites – Influence of processing on friction and wear behaviour Suárez, Sebastián; Rosenkranz, Andreas; Gachot, Carsten Carbon, Vol. 66 https://doi.org/10.1016/j.carbon.2013.08.054	journal	January 2014
Effect of ball-milling time on mechanical properties of carbon nanotubes reinforced aluminum matrix composites Liu, Z. Y.; Xu, S. J.; Xiao, B. L. Composites Part A: Applied Science and Manufacturing, Vol. 43, Issue 12 https://doi.org/10.1016/j.compositesa.2012.07.026	journal	December 2012
Microstructure, microhardness and thermal expansion of CNT/Al composites prepared by flake powder metallurgy Trinh, Pham Van; Luan, Nguyen Van; Phuong, Doan Dinh Composites Part A: Applied Science and Manufacturing, Vol. 105 https://doi.org/10.1016/j.compositesa.2017.11.022	journal	February 2018
Novel TiB2-reinforced 316L stainless steel nanocomposites with excellent room- and high-temperature yield strength developed by additive manufacturing AlMangour, Bandar; Kim, Young-Kyun; Grzesiak, Dariusz Composites Part B: Engineering, Vol. 156 https://doi.org/10.1016/j.compositesb.2018.07.050	journal	January 2019
Selective laser melting of dispersed TiC particles strengthened 316L stainless steel Zhai, Wengang; Zhu, Zhiguang; Zhou, Wei Composites Part B: Engineering, Vol. 199 https://doi.org/10.1016/j.compositesb.2020.108291	journal	October 2020
Selective laser melting of carbon/AlSi10Mg composites: Microstructure, mechanical and electronical properties Zhao, Xiao; Song, Bo; Fan, Wenrui Journal of Alloys and Compounds, Vol. 665 https://doi.org/10.1016/j.jallcom.2015.12.126	journal	April 2016
Rapid fabrication of bulk-form TiB2/316L stainless steel nanocomposites with novel reinforcement architecture and improved performance by selective laser melting AlMangour, Bandar; Grzesiak, Dariusz; Yang, Jenn-Ming Journal of Alloys and Compounds, Vol. 680 https://doi.org/10.1016/j.jallcom.2016.04.156	journal	September 2016
In-situ formation of novel TiC-particle-reinforced 316L stainless steel bulk-form composites by selective laser melting AlMangour, Bandar; Grzesiak, Dariusz; Yang, Jenn-Ming Journal of Alloys and Compounds, Vol. 706 https://doi.org/10.1016/j.jallcom.2017.01.149	journal	June 2017
Thermal behavior of the molten pool, microstructural evolution, and tribological performance during selective laser melting of TiC/316L stainless steel nanocomposites: Experimental and simulation methods AlMangour, Bandar; Grzesiak, Dariusz; Cheng, Jinquan Journal of Materials Processing Technology, Vol. 257 https://doi.org/10.1016/j.jmatprotec.2018.01.028	journal	July 2018
The influence of carbon nanotube addition on the phase composition, microstructure and mechanical properties of 316L stainless steel consolidated by spark plasma sintering Jenei, Péter; Balázsi, Csaba; Horváth, Ákos Journal of Materials Research and Technology, Vol. 8, Issue 1 https://doi.org/10.1016/j.jmrt.2018.07.019	journal	January 2019
Microstructure and fatigue behavior of laser-powder bed fusion austenitic stainless steel Yu, Chenfan; Zhang, Peng; Zhang, Zhefeng Journal of Materials Science & Technology, Vol. 46 https://doi.org/10.1016/j.jmst.2019.08.047	journal	June 2020
The relationship between hardness and yield stress in irradiated austenitic and ferritic steels Busby, Jeremy T.; Hash, Mark C.; Was, Gary S. Journal of Nuclear Materials, Vol. 336, Issue 2-3 https://doi.org/10.1016/j.jnucmat.2004.09.024	journal	February 2005
Intragranular cellular segregation network structure strengthening 316L stainless steel prepared by selective laser melting Zhong, Yuan; Liu, Leifeng; Wikman, Stefan Journal of Nuclear Materials, Vol. 470 https://doi.org/10.1016/j.jnucmat.2015.12.034	journal	March 2016
Crack and wear behavior of SiC particulate reinforced aluminium based metal matrix composite fabricated by direct metal laser sintering process Ghosh, Subrata Kumar; Saha, Partha Materials & Design, Vol. 32, Issue 1 https://doi.org/10.1016/j.matdes.2010.06.020	journal	January 2011
Selective laser melting of TiC reinforced 316L stainless steel matrix nanocomposites: Influence of starting TiC particle size and volume content AlMangour, Bandar; Grzesiak, Dariusz Materials & Design, Vol. 104 https://doi.org/10.1016/j.matdes.2016.05.018	journal	August 2016
Microstructural characteristics and mechanical properties of carbon nanotube reinforced Inconel 625 parts fabricated by selective laser melting Wang, Pei; Zhang, Baicheng; Tan, Cheng Cheh Materials & Design, Vol. 112 https://doi.org/10.1016/j.matdes.2016.09.080	journal	December 2016
Densification behavior, microstructural evolution, and mechanical properties of TiC/316L stainless steel nanocomposites fabricated by selective laser melting AlMangour, Bandar; Grzesiak, Dariusz; Borkar, Tushar Materials & Design, Vol. 138 https://doi.org/10.1016/j.matdes.2017.10.039	journal	January 2018
The influence of CNTs on the microstructure and ductility of CNT/Mg composites Han, G. Q.; Shen, J. H.; Ye, X. X. Materials Letters, Vol. 181 https://doi.org/10.1016/j.matlet.2016.06.021	journal	October 2016
Hardened austenite steel with columnar sub-grain structure formed by laser melting Saeidi, K.; Gao, X.; Zhong, Y. Materials Science and Engineering: A, Vol. 625 https://doi.org/10.1016/j.msea.2014.12.018	journal	February 2015
Strengthening of stainless steel by titanium carbide addition and grain refinement during selective laser melting AlMangour, Bandar; Baek, Min-Seok; Grzesiak, Dariusz Materials Science and Engineering: A, Vol. 712 https://doi.org/10.1016/j.msea.2017.11.126	journal	January 2018
Preparation and mechanical properties of CNTs-AlSi10Mg composite fabricated via selective laser melting Jiang, L. Y.; Liu, T. T.; Zhang, C. D. Materials Science and Engineering: A, Vol. 734 https://doi.org/10.1016/j.msea.2018.07.092	journal	September 2018
Effect of heat treatment on microstructure and mechanical properties of 316L steel synthesized by selective laser melting Salman, O. O.; Gammer, C.; Chaubey, A. K. Materials Science and Engineering: A, Vol. 748 https://doi.org/10.1016/j.msea.2019.01.110	journal	March 2019
Evolution of carbon nanotubes and their metallurgical reactions in Al-based composites in response to laser irradiation during selective laser melting Aboulkhair, Nesma T.; Simonelli, Marco; Salama, Ehab Materials Science and Engineering: A, Vol. 765 https://doi.org/10.1016/j.msea.2019.138307	journal	September 2019
Microstructure evolution, mechanical properties, and strengthening mechanism of TiC reinforced Inconel 625 nanocomposites fabricated by selective laser melting Chen, Lan; Sun, Yuzhou; Li, Lin Materials Science and Engineering: A, Vol. 792 https://doi.org/10.1016/j.msea.2020.139655	journal	August 2020
Microstructure and electrochemical corrosion properties of nickel-plated carbon nanotubes composite Inconel718 alloy coatings by laser melting deposition Song, Xinling; Lei, Jianbo; Xie, Jichang Optics & Laser Technology, Vol. 119 https://doi.org/10.1016/j.optlastec.2019.105593	journal	November 2019
Mixing of carbon nanotubes (CNTs) and aluminum powder for powder metallurgy use Liao, Jinzhi; Tan, Ming-Jen Powder Technology, Vol. 208, Issue 1 https://doi.org/10.1016/j.powtec.2010.12.001	journal	March 2011
Laser powder bed fusion additive manufacturing, microstructure evolution, and mechanical performance of carbon nanotube-decorated titanium alloy powders Zhou, Weiwei; Kamata, Kohei; Dong, Mingqi Powder Technology, Vol. 382 https://doi.org/10.1016/j.powtec.2020.12.066	journal	April 2021
Effect of SiC particles on the laser sintering of Al–7Si–0.3Mg alloy Simchi, A.; Godlinski, D. Scripta Materialia, Vol. 59, Issue 2 https://doi.org/10.1016/j.scriptamat.2008.03.007	journal	July 2008
Structural, mechanical and tribological investigations of CNT-316 stainless steel nanocomposites processed via spark plasma sintering Radhamani, A. V.; Lau, Hon Chung; Kamaraj, M. Tribology International, Vol. 152 https://doi.org/10.1016/j.triboint.2020.106524	journal	December 2020
Abrasive wear behaviour of laser sintered iron–SiC composites Ramesh, C. S.; Srinivas, C. K.; Channabasappa, B. H. Wear, Vol. 267, Issue 11 https://doi.org/10.1016/j.wear.2008.12.026	journal	October 2009
Effect of solution treatment on cavitation erosion behavior of high-nitrogen austenitic stainless steel Qiao, Yanxin; Chen, Jian; Zhou, Huiling Wear, Vol. 424-425 https://doi.org/10.1016/j.wear.2019.01.098	journal	April 2019
Additively manufactured hierarchical stainless steels with high strength and ductility Wang, Y. Morris; Voisin, Thomas; McKeown, Joseph T. Nature Materials, Vol. 17, Issue 1 https://doi.org/10.1038/nmat5021	journal	October 2017
Simultaneously enhanced strength and ductility for 3D-printed stainless steel 316L by selective laser melting Sun, Zhongji; Tan, Xipeng; Tor, Shu Beng NPG Asia Materials, Vol. 10, Issue 4 https://doi.org/10.1038/s41427-018-0018-5	journal	April 2018
A comprehensive study on microstructure and tensile behaviour of a selectively laser melted stainless steel Qiu, Chunlei; Kindi, Mohammed Al; Aladawi, Aiman Salim Scientific Reports, Vol. 8, Issue 1 https://doi.org/10.1038/s41598-018-26136-7	journal	May 2018
Load transfer in carbon nanotube epoxy composites Schadler, L. S.; Giannaris, S. C.; Ajayan, P. M. Applied Physics Letters, Vol. 73, Issue 26 https://doi.org/10.1063/1.122911	journal	December 1998
Laser sintering of separated and uniformly distributed multiwall carbon nanotubes integrated iron nanocomposites Lin, Dong; Richard Liu, C.; Cheng, Gary J. Journal of Applied Physics, Vol. 115, Issue 11 https://doi.org/10.1063/1.4869214	journal	March 2014
A nano-indentation study of the contact resistance and resistivity of a bi-layered Au/multi-walled carbon nanotube composite Down, M. P.; Lewis, A. P.; Jiang, L. Applied Physics Letters, Vol. 106, Issue 10 https://doi.org/10.1063/1.4915310	journal	March 2015
The Behavior of Thrust Washer Bearings Considering Mixed Lubrication and Asperity Contact Jackson, Robert L.; Green, Itzhak Tribology Transactions, Vol. 49, Issue 2 https://doi.org/10.1080/05698190600614841	journal	July 2006
Strength versus ductility in carbon nanotube reinforced nickel matrix nanocomposites Borkar, Tushar; Hwang, Jaewon; Hwang, Jun Yeon Journal of Materials Research, Vol. 29, Issue 6 https://doi.org/10.1557/jmr.2014.53	journal	March 2014
Self-Organization during Friction in Complex Surface Engineered Tribosystems Fox-Rabinovich, German; Gershman, Iosif; Yamamoto, Kenji Entropy, Vol. 12, Issue 2 https://doi.org/10.3390/e12020275	journal	February 2010
Tribo-Mechanisms of Carbon Nanotubes: Friction and Wear Behavior of CNT-Reinforced Nickel Matrix Composites and CNT-Coated Bulk Nickel Reinert, Leander; Suárez, Sebastian; Rosenkranz, Andreas Lubricants, Vol. 4, Issue 2 https://doi.org/10.3390/lubricants4020011	journal	April 2016
An Experimental Study of Temperature Effect on Properties of Nitride Layers on X37CrMoV51 Tool Steel Used in Extrusion Aluminium Industry Hubicki, Rafał; Richert, Maria; Wiewióra, Marcel Materials, Vol. 13, Issue 10 https://doi.org/10.3390/ma13102311	journal	May 2020
Microstructure, Solidification Texture, and Thermal Stability of 316 L Stainless Steel Manufactured by Laser Powder Bed Fusion Krakhmalev, Pavel; Fredriksson, Gunnel; Svensson, Krister Metals, Vol. 8, Issue 8 https://doi.org/10.3390/met8080643	journal	August 2018
Microstructure and Mechanical Properties of TiC-Reinforced 316L Stainless Steel Composites Fabricated Using Selective Laser Melting Zhao, Zhanyong; Li, Jing; Bai, Peikang Metals, Vol. 9, Issue 2 https://doi.org/10.3390/met9020267	journal	February 2019

Similar Records

Characterization of in-situ and ex-situ Ion-Irradiated Additively Manufactured 316L and 316H Stainless Steels

Journal Article · 2025 · Journal of Nuclear Materials · OSTI ID:3013592

Chen, Wei-Ying; Taller, Stephen; Jokisaari, Andrea M.; +6 more

Influence of carbon nanotubes on microstructure and corrosion performance of additively manufactured 316L stainless steel

Journal Article · 2023 · Corrosion Science · OSTI ID:2246641

Vukkum, Venkata Bhuvaneswari; Christudasjustus, Jijo; Ansell, Troy Y.; +2 more

Sensitization of 316L Stainless Steel made by Laser Powder Bed Fusion Additive Manufacturing

Journal Article · 2023 · Corrosion · OSTI ID:2205325

Snitzer, John; Lou, Xiaoyuan

Related Subjects

36 MATERIALS SCIENCE
Austenitic stainless steel
Carbon nanotube
Engineering
Friction
Hardness
Laser powder bed fusion additive manufacturing
Materials Science
Metal matrix composite
Tribology
Wear

Title: Carbon nanotube (CNT) reinforced 316L stainless steel composites made by laser powder bed fusion: Microstructure and wear response

Citation Formats

References (56)

Similar Records

Related Subjects