DOE PAGES title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Aerodynamic effects on outer ash deposition rates in second generation atmospheric pressure oxy-coal combustion systems

Journal Article · · Fuel
 [1];  [2];  [2];  [2];  [3];  [3]
  1. University of North Dakota, Grand Forks, ND (United States); OSTI
  2. University of North Dakota, Grand Forks, ND (United States)
  3. University of Utah, Salt Lake City, UT (United States)

Recent measurements in scenarios representative of second generation atmospheric pressure oxy-coal combustion systems have shown a significant increase in ash deposition rates in comparison to combustion in air. However, the causative mechanisms behind this increase have not been well understood. To fill this void, well-characterized experiments including fuel and deposit particle size distributions (PSDs) were coupled with highly resolved numerical simulations to isolate the aerodynamic effects impacting the deposition process such that mechanisms could be hypothesized. Three combustion scenarios (AIR, OXY27, OXY70) spanning a factor of three variation in flue gas volumetric flow rates were simulated and the deposition characteristics (impaction rates, deposit PSD, temperature, residence times, capture rates) tracked/predicted using a customized deposition module. The measured deposit PSD was significantly different from the PSD of the parent fuel indicating significant physio-chemical transformations (coalescence and particle growth in particular) at play. The use of simplistic modeling approaches (swelling parameter variations) to model particle growth led to inaccurate deposit ash PSD and rate predictions. A more satisfactory agreement between the measurements and simulations was obtained when the functional form of the parent fuel PSD (spread parameter) was modified to conform closely to the deposit PSD while still ensuring the fidelity of temperature and velocity predictions. Based on the measured ash compositions, identical capture criteria were employed across all three scenarios. Here this study further supports the theory that the ash deposition rates in these systems are dominated by aerodynamic effects with the ash PSD playing a dominant role.

Research Organization:
University of North Dakota, Grand Forks, ND (United States)
Sponsoring Organization:
National Science Foundation (NSF); USDOE Office of Fossil Energy (FE)
Grant/Contract Number:
FE0031741
OSTI ID:
1977128
Journal Information:
Fuel, Journal Name: Fuel Journal Issue: C Vol. 303; ISSN 0016-2361
Publisher:
ElsevierCopyright Statement
Country of Publication:
United States
Language:
English

References (27)

A new weighted-sum-of-gray-gases model for oxy-combustion scenarios: A new model for oxy-combustion scenarios journal December 2012
Global reaction schemes for hydrocarbon combustion journal September 1988
The measurement and estimation of the physical properties of slags formed during coal gasification journal February 1989
Modeling the fragmentation of non-uniform porous char particles during pulverized coal combustion journal May 2000
Convective heat transfer coefficients in a full-scale room with and without furniture journal July 2001
Modeling of ash formation and deposition processes in coal and biomass fired boilers: A comprehensive review journal November 2018
Results of initial operation of the Jupiter Oxygen Corporation oxy- fuel 15 MWth burner test facility journal February 2009
Development of fragmentation models for solid fuel combustion and gasification as subroutines for inclusion in CFD codes journal September 2007
Study on ash deposition under oxyfuel combustion of coal/biomass blends journal August 2010
Comparison of particulate formation and ash deposition under oxy-fuel and conventional pulverized coal combustions journal April 2013
Fly ash deposition modelling: Requirements for accurate predictions of particle impaction on tubes using RANS-based computational fluid dynamics journal June 2013
Oxy-fuel combustion characteristics of pulverized-coal in a drop tube furnace journal January 2014
Measurements and CFD modeling of a pulverized coal flame with emphasis on ash deposition journal March 2016
Relationship between submicron ash aerosol characteristics and ash deposit compositions and formation rates during air- and oxy-coal combustion journal October 2016
Large Eddy Simulation of a particle-laden flow around a cylinder: Importance of thermal boundary layer effects for slagging and fouling journal April 2019
Understanding the effects of oxyfuel combustion and furnace scale on biomass ash deposition journal July 2019
Modeling ash deposit growth rates for a wide range of solid fuels in a 100 kW combustor journal June 2021
Ash and deposit formation from oxy-coal combustion in a 100kW test furnace journal July 2011
Evaluation of RANS and SRS methods for simulation of the flow around a circular cylinder in the sub-critical regime journal August 2019
Oxy-fuel combustion of pulverized coal: Characterization, fundamentals, stabilization and CFD modeling journal April 2012
Progress in O2 separation for oxy-fuel combustion–A promising way for cost-effective CO2 capture: A review journal July 2018
Ash formation and deposition in coal and biomass fired combustion systems: Progress and challenges in the field of ash particle sticking and rebound behavior journal September 2018
Prediction of particle sticking efficiency for fly ash deposition at high temperatures journal January 2019
Measurements and modelling of oxy-fuel coal combustion journal January 2019
On Ash Deposition Rates from Air and Oxy-Combustion of Pulverized Coal, Petroleum Coke, and Biomass journal February 2019
Ash Formation and Deposition in Oxy-fuel Combustion of Rice Husk, Coal, and Their Blend with 70% Inlet O 2 journal December 2019
Assessing the Role of Particles in Radiative Heat Transfer during Oxy-Combustion of Coal and Biomass Blends journal January 2015