Development of grain-scale slip activity and lattice rotation fields in Inconel 718

Hestroffer, Jonathan M.; Latypov, Marat I.; Stinville, Jean-Charles; Charpagne, Marie-Agathe; Valle, Valery; Miller, Matthew P.; Pollock, Tresa M.; Beyerlein, Irene J.

doi:10.1016/j.actamat.2022.117627

Title: Development of grain-scale slip activity and lattice rotation fields in Inconel 718

Journal Article · 08 January 2022 · Acta Materialia

DOI: https://doi.org/10.1016/j.actamat.2022.117627 · OSTI ID:1976785

Hestroffer, Jonathan M. ^[1]; Latypov, Marat I. ^[2]; Stinville, Jean-Charles ^[1]; Charpagne, Marie-Agathe ^[1]; Valle, Valery ^[3]; Miller, Matthew P. ^[4]; Pollock, Tresa M. ^[1]; Beyerlein, Irene J. ^[1]

University of California, Santa Barbara, CA (United States)
University of Arizona, Tucson, AZ (United States)
University of Poitiers (France)
Cornell University, Ithaca, NY (United States)

Using a combination of in-situ high-resolution digital image correlation (HR-DIC), Heaviside-DIC method (H-DIC), and crystal plasticity finite element (CPFE), we investigate the evolution of intragranular lattice rotations and slip activity during monotonic and cyclic loading in a high performance, polycrystalline face centered cubic material. The CPFE employs a quasi-3D model microstructure, which is a highly resolved mirror representation of the experimental in-situ test sample. In agreement, the measurements and calculations reveal that most grains, regardless of their size and lattice orientation, develop intragranular lattice rotation gradients that span the grain. For a small cluster of grains on the deformed material, we perform HR-DIC analysis of slip lines to demonstrate agreement in the active slip systems and changes in this local slip activity across the individual grains. The combined analysis reveals that deforming grains are divided into sub-granular regions of uniform lattice rotation and these regions are most often associated with only one or two active slip systems. The gradient lines that divide them correspond to changes in the predominant slip system. The model is used to examine the evolution of intragranular lattice rotation in a single fully reversed tension-compression cycle. The calculations indicate that intragranular gradients intensify during the reverse loading path as nearest neighboring regions appear to shed lattice rotation, increasing the lattice rotation in some regions, while shutting down rotation in neighboring regions. So these findings provide insight into the irreversible changes that develop within deforming grains at the scale of the grain, particularly the heterogeneous development of intragranular lattice rotation in early stages of deformation, which could serve as precursors to localization.

View Accepted Manuscript (DOE)

Cite

Export

Save

Research Organization:: Univ. of California, Santa Barbara, CA (United States)

Sponsoring Organization:: USDOE Office of Science (SC), Basic Energy Sciences (BES)

Grant/Contract Number:: SC0018901

OSTI ID:: 1976785

Journal Information:: Acta Materialia, Vol. 226, Issue C; ISSN 1359-6454

Publisher:: ElsevierCopyright Statement

Country of Publication:: United States

Language:: English

References (44)

Strain localization and damage in dual phase steels investigated by coupled in-situ deformation experiments and crystal plasticity simulations Tasan, C. C.; Hoefnagels, J. P. M.; Diehl, M. International Journal of Plasticity, Vol. 63 https://doi.org/10.1016/j.ijplas.2014.06.004	journal	December 2014
Characterizing microscale deformation mechanisms and macroscopic tensile properties of a high strength magnesium rare-earth alloy: A combined experimental and crystal plasticity approach Githens, A.; Ganesan, S.; Chen, Z. Acta Materialia, Vol. 186 https://doi.org/10.1016/j.actamat.2019.12.012	journal	March 2020
On the assumptions of the generalized plane stress problem and the Filon average Wang, Min-Zhong; Xu, Bai-Xiang; Gao, Yang Acta Mechanica, Vol. 225, Issue 4-5 https://doi.org/10.1007/s00707-013-1036-6	journal	February 2014
A combined grain scale elastic–plastic criterion for identification of fatigue crack initiation sites in a twin containing polycrystalline nickel-base superalloy Stinville, J. C.; Lenthe, W. C.; Miao, J. Acta Materialia, Vol. 103 https://doi.org/10.1016/j.actamat.2015.09.050	journal	January 2016
Insight into microstructure-sensitive elastic strain concentrations from integrated computational modeling and digital image correlation Latypov, Marat I.; Stinville, Jean-Charles; Mayeur, Jason R. Scripta Materialia, Vol. 192 https://doi.org/10.1016/j.scriptamat.2020.10.001	journal	February 2021
Investigation of three-dimensional aspects of grain-scale plastic surface deformation of an aluminum oligocrystal Zhao, Z.; Ramesh, M.; Raabe, D. International Journal of Plasticity, Vol. 24, Issue 12 https://doi.org/10.1016/j.ijplas.2008.01.002	journal	December 2008
High-Resolution Deformation Mapping Across Large Fields of View Using Scanning Electron Microscopy and Digital Image Correlation Chen, Z.; Lenthe, W.; Stinville, J. C. Experimental Mechanics, Vol. 58, Issue 9 https://doi.org/10.1007/s11340-018-0419-y	journal	August 2018
Stress and deformation heterogeneity in individual grains within polycrystals subjected to fully reversed cyclic loading Wong, Su Leen; Obstalecki, Mark; Miller, Matthew P. Journal of the Mechanics and Physics of Solids, Vol. 79 https://doi.org/10.1016/j.jmps.2015.03.010	journal	June 2015
Finite element modeling of crystal plasticity with grains shaped as truncated octahedrons Delannay, Laurent; Jacques, Pascal J.; Kalidindi, Surya R. International Journal of Plasticity, Vol. 22, Issue 10 https://doi.org/10.1016/j.ijplas.2006.01.008	journal	October 2006
Revealing the Subsurface Basal 〈a〉 Dislocation Activity in Magnesium Through Lattice Rotation Analysis Zhou, Bijin; Wang, Leyun; Liu, Wenjun Metallurgical and Materials Transactions A, Vol. 51, Issue 9 https://doi.org/10.1007/s11661-020-05907-w	journal	September 2020
Incorporating grain-level residual stresses and validating a crystal plasticity model of a two-phase Ti-6Al-4 V alloy produced via additive manufacturing Kapoor, Kartik; Yoo, Yung Suk Jeremy; Book, Todd A. Journal of the Mechanics and Physics of Solids, Vol. 121 https://doi.org/10.1016/j.jmps.2018.07.025	journal	December 2018
Effect of realistic 3D microstructure in crystal plasticity finite element analysis of polycrystalline Ti-5Al-2.5Sn Zhang, C.; Li, H.; Eisenlohr, P. International Journal of Plasticity, Vol. 69 https://doi.org/10.1016/j.ijplas.2015.01.003	journal	June 2015
Coupling between experimental measurements and polycrystal finite element calculations for micromechanical study of metallic materials Héripré, E.; Dexet, M.; Crépin, J. International Journal of Plasticity, Vol. 23, Issue 9 https://doi.org/10.1016/j.ijplas.2007.01.009	journal	September 2007
Quantitative investigation of micro slip and localization in polycrystalline materials under uniaxial tension Zhang, Zhen; Lunt, David; Abdolvand, Hamidreza International Journal of Plasticity, Vol. 108 https://doi.org/10.1016/j.ijplas.2018.04.014	journal	September 2018
Crystal Plasticity Asaro, R. J. Journal of Applied Mechanics, Vol. 50, Issue 4b https://doi.org/10.1115/1.3167205	journal	December 1983
Crystal plasticity modelling and HR-DIC measurement of slip activation and strain localization in single and oligo-crystal Ni alloys under fatigue Guan, Yongjun; Chen, Bo; Zou, Jinwen International Journal of Plasticity, Vol. 88 https://doi.org/10.1016/j.ijplas.2016.10.001	journal	January 2017
Crystallographic aspects of geometrically-necessary and statistically-stored dislocation density Arsenlis, A.; Parks, D. M. Acta Materialia, Vol. 47, Issue 5 https://doi.org/10.1016/S1359-6454(99)00020-8	journal	March 1999
Latent hardening in copper and aluminium single crystals Franciosi, P.; Berveiller, M.; Zaoui, A. Acta Metallurgica, Vol. 28, Issue 3 https://doi.org/10.1016/0001-6160(80)90162-5	journal	March 1980
Understanding the evolving state of deforming polycrystals using synchrotron x-rays Miller, Matt; Budrow, Chris; Long, Tim IOP Conference Series: Materials Science and Engineering, Vol. 580 https://doi.org/10.1088/1757-899X/580/1/012009	journal	December 2019
Crack initiation sensitivity of wrought direct aged alloy 718 in the very high cycle fatigue regime: the role of non-metallic inclusions Texier, Damien; Cormier, Jonathan; Villechaise, Patrick Materials Science and Engineering: A, Vol. 678 https://doi.org/10.1016/j.msea.2016.09.098	journal	December 2016
Experimental investigation of plastic grain interaction Sachtleber, M.; Zhao, Z.; Raabe, D. Materials Science and Engineering: A, Vol. 336, Issue 1-2 https://doi.org/10.1016/S0921-5093(01)01974-8	journal	October 2002
The influence of microstructure on surface strain distributions in a nickel micro-tension specimen Turner, T. J.; Shade, P. A.; Schuren, J. C. Modelling and Simulation in Materials Science and Engineering, Vol. 21, Issue 1 https://doi.org/10.1088/0965-0393/21/1/015002	journal	November 2012
Observations of lattice curvature near the interface of a deformed aluminium bicrystal Sun, S.; Adams, B. L.; King, W. E. Philosophical Magazine A, Vol. 80, Issue 1 https://doi.org/10.1080/01418610008212038	journal	January 2000
Nickel-Based Superalloys for Advanced Turbine Engines: Chemistry, Microstructure and Properties Pollock, Tresa M.; Tin, Sammy Journal of Propulsion and Power, Vol. 22, Issue 2 https://doi.org/10.2514/1.18239	journal	March 2006
Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications Roters, F.; Eisenlohr, P.; Hantcherli, L. Acta Materialia, Vol. 58, Issue 4 https://doi.org/10.1016/j.actamat.2009.10.058	journal	February 2010
Simulation of micromechanical behavior of polycrystals: finite elements versus fast Fourier transforms Prakash, A.; Lebensohn, R. A. Modelling and Simulation in Materials Science and Engineering, Vol. 17, Issue 6 https://doi.org/10.1088/0965-0393/17/6/064010	journal	August 2009
An experimental study of the polycrystalline plasticity of austenitic stainless steel Di Gioacchino, Fabio; Quinta da Fonseca, João International Journal of Plasticity, Vol. 74 https://doi.org/10.1016/j.ijplas.2015.05.012	journal	November 2015
Direct measurements of slip irreversibility in a nickel-based superalloy using high resolution digital image correlation Stinville, J. C.; Callahan, P. G.; Charpagne, M. A. Acta Materialia, Vol. 186 https://doi.org/10.1016/j.actamat.2019.12.009	journal	March 2020
Microstructural statistics for fatigue crack initiation in polycrystalline nickel-base superalloys Stinville, J. C.; Lenthe, W. C.; Echlin, M. P. International Journal of Fracture, Vol. 208, Issue 1-2 https://doi.org/10.1007/s10704-017-0241-z	journal	September 2017
Automated and quantitative analysis of plastic strain localization via multi-modal data recombination Charpagne, M. A.; Stinville, J. C.; Callahan, P. G. Materials Characterization, Vol. 163 https://doi.org/10.1016/j.matchar.2020.110245	journal	May 2020
Measurement of elastic and rotation fields during irreversible deformation using Heaviside-digital image correlation Stinville, J. C.; Charpagne, M. A.; Bourdin, F. Materials Characterization, Vol. 169 https://doi.org/10.1016/j.matchar.2020.110600	journal	November 2020
A multiscale model for the elastoviscoplastic behavior of Directionally Solidified alloys: Application to FE structural computations Martin, G.; Ochoa, N.; Saï, K. International Journal of Solids and Structures, Vol. 51, Issue 5 https://doi.org/10.1016/j.ijsolstr.2013.12.013	journal	March 2014
Crystallographic texture evolution in bulk deformation processing of FCC metals Kalidindi, S. R.; Bronkhorst, C. A.; Anand, L. Journal of the Mechanics and Physics of Solids, Vol. 40, Issue 3 https://doi.org/10.1016/0022-5096(92)80003-9	journal	January 1992
Grain-scale experimental validation of crystal plasticity finite element simulations of tantalum oligocrystals Lim, H.; Carroll, J. D.; Battaile, C. C. International Journal of Plasticity, Vol. 60 https://doi.org/10.1016/j.ijplas.2014.05.004	journal	September 2014
Kinetics of flow and strain-hardening Mecking, H.; Kocks, U. F. Acta Metallurgica, Vol. 29, Issue 11 https://doi.org/10.1016/0001-6160(81)90112-7	journal	November 1981
A procedure for identifying the plastic behavior of single crystals from the local response of polycrystals Hoc, T.; Crépin, J.; Gélébart, L. Acta Materialia, Vol. 51, Issue 18 https://doi.org/10.1016/S1359-6454(03)00413-0	journal	October 2003
Some geometrical relations in dislocated crystals Nye, J. F. Acta Metallurgica, Vol. 1, Issue 2 https://doi.org/10.1016/0001-6160(53)90054-6	journal	March 1953
Measurements of plastic localization by heaviside-digital image correlation Bourdin, F.; Stinville, J. C.; Echlin, M. P. Acta Materialia, Vol. 157 https://doi.org/10.1016/j.actamat.2018.07.013	journal	September 2018
On modelling the elasto-viscoplastic response of metals using polycrystal plasticity Marin, E. B.; Dawson, P. R. Computer Methods in Applied Mechanics and Engineering, Vol. 165, Issue 1-4 https://doi.org/10.1016/S0045-7825(98)00034-6	journal	November 1998
A crystal-plasticity FEM study on effects of simplified grain representation and mesh types on mesoscopic plasticity heterogeneities Choi, Y. S.; Groeber, M. A.; Turner, T. J. Materials Science and Engineering: A, Vol. 553 https://doi.org/10.1016/j.msea.2012.05.089	journal	September 2012
Multiple slip in bicrystal deformation Livingston, J. D.; Chalmers, B. Acta Metallurgica, Vol. 5, Issue 6 https://doi.org/10.1016/0001-6160(57)90044-5	journal	June 1957
Self-Assembled Nanoparticle Surface Patterning for Improved Digital Image Correlation in a Scanning Electron Microscope Kammers, A. D.; Daly, S. Experimental Mechanics, Vol. 53, Issue 8 https://doi.org/10.1007/s11340-013-9734-5	journal	March 2013
Material rate dependence and localized deformation in crystalline solids Peirce, D.; Asaro, R. J.; Needleman, A. Acta Metallurgica, Vol. 31, Issue 12 https://doi.org/10.1016/0001-6160(83)90014-7	journal	December 1983
Three-dimensional investigation of the texture and microstructure below a nanoindent in a Cu single crystal using 3D EBSD and crystal plasticity finite element simulations Zaafarani, N.; Raabe, D.; Singh, R. N. Acta Materialia, Vol. 54, Issue 7 https://doi.org/10.1016/j.actamat.2005.12.014	journal	April 2006